Get access

Enhanced performances in inverted bottom-emission organic light-emitting diodes with KBH4-doped electron-injection layer

Authors

  • Hyunkoo Lee,

    Corresponding author
    1. OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon, Republic of Korea
    2. School of Electrical and Computer Engineering, Inter-university Semiconductor Research Center, Seoul National University, Seoul, Republic of Korea
    Search for more papers by this author
  • Yongwon Kwon,

    1. School of Electrical and Computer Engineering, Inter-university Semiconductor Research Center, Seoul National University, Seoul, Republic of Korea
    Search for more papers by this author
  • Heeyoung Jung,

    1. School of Electrical and Computer Engineering, Inter-university Semiconductor Research Center, Seoul National University, Seoul, Republic of Korea
    Search for more papers by this author
  • Jeong-Ik Lee,

    1. OLED Research Center, Electronics and Telecommunications Research Institute (ETRI), Daejeon, Republic of Korea
    Search for more papers by this author
  • Changhee Lee

    Corresponding author
    1. School of Electrical and Computer Engineering, Inter-university Semiconductor Research Center, Seoul National University, Seoul, Republic of Korea
    Search for more papers by this author

Abstract

We report that a potassium borohydride (KBH4)-doped 1,3,5-tri(m-pyrid-3-yl-phenyl)benzene (TmPyPB) layer can be utilized as an efficient electron-injection layer (EIL) for the inverted bottom-emission organic light-emitting diodes (IBE-OLEDs). The KBH4-doped EIL in the IBE-OLEDs having tris(2-phenylpyridine)iridium(III) as a green phosphorescent dopant show a lower turn-on voltage (∼7 V) and about two times higher efficiency (∼13.9% and 44.5 cd A−1 at 0.63 mA cm−2) compared with the device without the KBH4-doped EIL. Furthermore, the KBH4-doped EIL rarely affects the electroluminescence spectrum of the device. The KBH4-doped TmPyPB films with different doping ratios are also analyzed by using electron-only devices (EODs) and X-ray photoemission spectroscopy. As the doping ratio of the KBH4 increases, the current of the EOD and the amounts of potassium increase. This result indicates that the potassium improves the electron-injection ability of an organic electron-transport layer. Therefore, the KBH4-doped EIL can be utilized as an effective EIL in the inverted structure OLEDs.

Get access to the full text of this article

Ancillary