Erratum Efficient solar energy conversion of TiO2 nanotubes produced by rapid breakdown anodization – a comparison [Phys. Status Solidi RRL 1, No. 4, 135–137 (2007)]

Authors

Errata

This article corrects:

  1. Efficient solar energy conversion using TiO2 nanotubes produced by rapid breakdown anodization – a comparison Volume 1, Issue 4, 135–137, Article first published online: 27 April 2007

Abstract

There is an error in the scale bar of the inset of Fig. 1b in the original manuscript. The corrected figure is presented here in Fig. 1. As the originally used figure (see Fig. 2a here) was not very representative for TiO2 nanotubes grown under the described conditions we now provide a more representative picture (Fig. 2b) confirming an average thickness of ∼2.5 µm (as given throughout the paper). No statement or other scientific content of the article is affected by this correction. (© 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Figure 1.

SEM cross sections and top-views (inset) of TiO2 nanotubes grown in phosphates (a), sulfates (b) containing electrolytes and RBA-NTs (c).

Figure 2.

SEM cross sections of TiO2 nanotubes with the machine-generated scale bar of the picture used in the original manuscript (a) and the corrected one (b).

Ancillary