• Benga GC, Abrao AM. 2003. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools. J Mater Proces Technol 143–144:237241.
  • Bigerelle M, Najjar D, Iost A. 2003. Relevance of roughness parameters for description and modeling of machined surfaces. J Mater Sci 38:25252536.
  • Bigerelle M, Gautier A, Iost A. 2007. Roughness characteristic length scales of micro-machined surfaces: a multi-scale modelling. Sens Actuators B Chem 126:126137.
  • Byrne G, Dornfeld D, Denkena B. 2003. Advancing cutting technology. CIRP Ann Manu Technol 52:483507.
  • Cheung CF, Lee WB. 2000. A multi-spectrum analysis of surface roughness formation in ultra-precision machining. Precis Eng 24:7787.
  • Gilgean S, Najjar D, Bigerelle M, Iost A. 2008. Multiscale analysis of abrasion damage on stainless steel. Surf Eng 24:817.
  • Grzesik W, Wanat T. 2005. Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis. J Mater Proces Technol 169:364371.
  • Jouini N, Revel P, Mazeran P-E, Bigerelle M. 2013. The ability of precision hard turning to increase rolling contact fatigue life. Tribol Int 59:141146.
  • Klocke F, Brinksmeier E, Weinert K. 2005. Capability profile of hard cutting and grinding processes. CIRP Ann Manu Technol 54:557580.
  • Koenig W, Berktold A, Koch KF. 1993. Turning versus grinding: a comparison of surface integrity aspects and attainable accuracies. CIRP Ann 42:3943.
  • Najjar D, Bigerelle M, Iost A. 2003. The computer based bootstrap method as a tool to select a relevant surface roughness parameter. Wear 254:450460.
  • Najjar D, Bigerelle M, Hennebelle F, Iost A. 2006. Contribution of statistical methods to the study of worn paint coatings surface topography. Surf Coat Technol 200:60886100.
  • Ozel T, Karpat Y. 2005. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. Int J Mach Tool Manu 4:467479.
  • Sahin Y, Motorcu AR. 2008. Surface roughness model in machining hardened steel with cubic boron nitride cutting tools. Int J Refract Met Hard Mater 26:8490.
  • Schwach DW, Guo YB. 2005. Feasibility of producing optimal surface integrity by process design in hard turning. Mater Sci Eng A 395:116123.
  • Thomas DJ. 1999. Rough surfaces. London: Imperial College Press.
  • Tonshoff H, Arendt C, Ben Amor R. 2000. Cutting of hardened steel. CIRP Ann Manu Technol 49:547566.
  • Waikar RA, Guo YB. 2008. A comprehensive characterization of 3D surface topography induced by hard turning versus grinding. J Mater Proces Technol 197:189199.
  • Whitehouse DJ. 1994. Handbook of surface metrology. Bristol: Institute of Physics Publishing.