SEARCH

SEARCH BY CITATION

References

  • Alabyan, A. M., A computer model of bank erosion based on secondary flow simulation, in Coherent Flow Structures in Open Channels, edited by P. Ashworth et al., pp. 568580, John Wiley, New York, 1996.
  • Allen, J. R. L., A quantitative model of grain size and sedimentary structures in lateral deposits, Geol. J., 7, 129146, 1970.
  • Ariathurai, R., and K. Arulanandan, Erosion rates of cohesive soils, J. Hydraul. Div. Am. Soc. Civ. Eng., 104(HY3), 279283, 1978.
  • Arulanandan, K., E. Gillogley, and R. Tully, Development of a quantitative method to predict critical shear stress and rate of erosion of naturally undisturbed cohesive soils, Res. Rep. GL-80-5, U.S. Army Eng., Waterways Experiment Station, Vicksburg, Miss., 1980.
  • ASCE Task Committee, Final report of the ASCE Task Committee on relations between morphology of small streams and sediment yield, J. Hydaul. Div. Am. Soc. Civ. Eng., 108(HY11), 13281365, 1982.
  • ASCE Task Committee, Final report of the ASCE Task Committee on hydraulics, bank mechanics and river width adjustment, I, Processes and mechanisms, J. Hydraul. Eng., 124, 881902, 1998.
  • Bishop, A. W., The use of the slip circle in the stability analysis of slopes, Geotechnique, 5, 717, 1955.
  • Blackmarr, W. A., Documentation of hydrologic, geomorphic, and sediment transport measurements on the Goodwin Creek Experimental Watershed, northern Mississippi, for the period 1982 to 1993, Res. Rep., 3, U.S. Dep. of Agric., Natl. Sed. Lab., Oxford, Miss., 1995.
  • Blondeaux, P., and G. Seminara, A unified bar-bend theory of river meanders, J. Fluid Mech., 157, 449470, 1985.
  • Brice, J. C., Evolution of meander loops, Geol. Soc. Am. Bull., 85, 581586, 1974.
  • Bridge, J. S., A revised model for water flow, sediment transport, bed topography and grain size sorting in natural river bends, Water Resour. Res., 28, 9991013, 1992.
  • Carlston, C. W., The relation of free meander geometry to stream discharge and its geomorphological implications, Am. J. Sci., 263, 864885, 1965.
  • Crosato, A., Simulation of meandering river processes, Commun. Hydraul. Geotech. Eng. 90-3, Delft Univ. of Technol., Netherlands, 1990.
  • Culmann, C., Graphische Statick, Zurich, Switzerland, 1866.
  • Dapporto, S., Non-vertical jet testing of cohesive streambank toe material, internal report, U.S. Dep. of Agric., Natl. Sed. Lab., Oxford, Miss., 2001.
  • Darby, S. E., Modelling width adjustment in straight alluvial channels, Hydrol. Processes, 12, 12991321, 1998.
  • Darby, S. E., and C. R. Thorne, Numerical simulation of widening and bed deformation of straight sand-bed rivers, I, Model development, J. Hydraul. Eng., 122, 184193, 1996a.
  • Darby, S. E., and C. R. Thorne, Stability analysis for steep, eroding, cohesive riverbanks, J. Hydraul. Eng., 122, 443454, 1996b.
  • Darby, S. E., C. R. Thorne, and A. Simon, Numerical simulation of bed deformation and channel widening in straight sand-bed rivers, II, Model evaluation, J. Hydraul. Eng., 122, 194202, 1996.
  • Darby, S. E., D. Gessler, and C. R. Thorne, Computer program for stability analysis of steep, cohesive riverbanks, Earth Surf. Processes Landforms, 25, 175190, 2000.
  • De Vriend, H. J., Steady flow in channel bends, Commun. Hydraul. Geotech. Eng. 81, Delft Univ. of Technol., Netherlands, 1981.
  • Dietrich, W. E., and J. D. Smith, Influence of the point bar on flow through curved channels, Water Resour. Res., 19, 11731192, 1983.
  • Dietrich, W. E., J. D. Smith, and T. Dunne, Flow and sediment transport in a sand-bedded meander, J. Geol., 87, 305315, 1979.
  • Engelund, F., Flow and bed topography in channel bends, J. Hydraul. Div. Am. Soc. Civ. Eng., 100(HY11), 16311648, 1974.
  • Engelund, F. and E. Hansen, Monograph on Sediment Transport in Alluvial Streams, Teknisk Forlag, Copenhagen, 1967.
  • Furbish, D. J., Spatial autoregressive structure in meander evolution, Geol. Soc. Am. Bull., 103, 15761589, 1991.
  • Gomez, B., and M. Church, An assessment of bed load sediment transport formulae for gravel bed rivers, Water Resour. Res., 25, 11611186, 1989.
  • Hagerty, D. J., Piping/sapping erosion, I, Basic considerations, J. Hydraul. Eng, 117, 9911008, 1991.
  • Hanson, G. J., Field and laboratory jet testing method for determining cohesive material erodibility, in Proceedings of the Seventh Federal Interagency Sedimentation Conference, vol. 2, pp. V1V8, Subcomm. on Sedimentation, Washington, D. C., 2001.
  • Hanson, G. J., and A. Simon, Erodibility of cohesive streambeds in the loess area of the midwestern USA, Hydrol. Processes, 15, 2338, 2001.
  • Hodskinson, A., and R. Ferguson, Numerical modelling of separated flow in river bends: Model testing and experimental investigation of geometric controls on the extent of flow separation at the concave bank, Hydrol. Processes, 12, 13231338, 1998.
  • Howard, A. D., Modelling channel migration and floodplain development in meandering streams, in Lowland Floodplain Rivers, edited by P. A. Carling, and G. E. Petts, pp. 142, John Wiley, New York, 1992.
  • Huang, H. Q., and G. C. Nanson, The influence of bank strength on channel geometry: An integrated analysis of some observations, Earth Surf. Processes Landforms, 23, 865876, 1998.
  • Ikeda, S., G. Parker, and K. Sawai, Bend theory of river meanders, 1, Linear development, J. Fluid Mech., 112, 363377, 1981.
  • Johannesson, H., and G. Parker, Linear theory of river meanders, in River Meandering, Water Resour. Monogr. Ser., vol. 12, edited by S. Ikeda, and G. Parker, pp. 181214, AGU, Washington, D. C., 1989.
  • Kalkwijk, J. P. T., and H. J. De Vriend, Computations of the flow in shallow river bends, J. Hydraul. Res., 18, 327342, 1980.
  • Kinoshita, R., and H. Miwa, River channel formation which prevents downstream translation of transverse bars, J. Erosion Control Eng. Soc. Jpn., 94, 1217, 1974.
  • Knighton, A. D., and G. C. Nanson, Anastomosis and the continuum of channel pattern, Earth Surf. Processes Landforms, 18, 613625, 1993.
  • Kuhnle, R. A., R. L. Bingner, G. R. Foster, and E. H. Grissinger, Effect of land use changes on sediment transport in Goodwin Creek, Water Resour. Res., 32, 31893196, 1996.
  • Lane, S. N., and P. D. Bates, Introduction, in High Resolution Flow Modelling in Hydrology and Geomorphology, edited by S. N. Lane, and P. D. Bates, pp. 112, John Wiley, New York, 1998.
  • Langbein, W. B., and L. B. Leopold, River meanders and the theory of minimum variance, U.S. Geol. Surv. Prof. Pap., 442-H, 1966.
  • Lawler, D. M., Process dominance in bank erosion systems, in Lowland Floodplain Rivers, edited by P. A. Carling, and G. E. Petts, pp. 117143, John Wiley, New York, 1992.
  • Lohnes, R., and R. L. Handy, Slope angles in friable loess, J. Geol., 76, 247258, 1968.
  • Meyer-Peter, E., and R. Müller, Formulas for bed-load transport, in Proceedings of 2nd Congress IAHR, pp. 3964, Int. Assoc. for Hydraul. Res., Delft, Netherlands, 1948.
  • Millar, R. G., Influence of bank vegetation on alluvial channel patterns, Water Resour. Res., 36, 11091118, 2000.
  • Mosselman, E., Modelling of river morphology with non-orthogonal horizontal curvilinear coordinates, Commun. Hydraul. Geotech. Eng. 91-1, Delft Univ. of Technol., Netherlands, 1991.
  • Mosselman, E., Mathematical modelling of morphological processes in rivers with erodible cohesive banks, Commun. Hydraul. Geotech. Eng. 92-3, Delft Univ. of Technol., Netherlands, 1992.
  • Mosselman, E., Morphological modelling of rivers with erodible banks, Hydrol. Processes, 12, 13571370, 1998.
  • Nagata, N., T. Hosoda, and Y. Muramoto, Numerical analysis of river channel processes with bank erosion, J. Hydraul. Eng., 126, 243252, 2000.
  • Nanson, G. C., and E. J. Hickin, A statistical analysis of bank erosion and channel migration in western Canada, Geol. Soc. Am. Bull., 97, 497504, 1986.
  • Nelson, J. M., and J. D. Smith, Evolution and stability of erodible channel beds, in River Meandering, Water Resour. Monogr. Ser., vol. 12, edited by S. Ikeda, and G. Parker, pp. 321377, AGU, Washington, D. C., 1989.
  • Odgaard, A. J., Flow and bed topography in an alluvial channel bend, J. Hydraul. Eng., 110, 521536, 1984.
  • Odgaard, A. J., River meander model, I, Development, J. Hydraul. Eng., 115, 14331450, 1989.
  • Odgaard, A. J., and M. A. Bergs, Flow processes in curved alluvial channel, Water Resour. Res., 24, 4556, 1988.
  • Olesen, K. W., Introduction of streamline curvature into flow computations for shallow river bends, Comunm. Hydraul. Geotech. Eng. 82-5, Delft Univ. of Technol., Netherlands, 1982.
  • Olesen, K. W., Bed topography in shallow river bends, Commun. Hydraul. Geotech. Eng. 87-1, Delft Univ. of Technol., Netherlands, 1987.
  • Osman, A. M., and C. R. Thorne, Riverbank stability analysis, I, Theory, J. Hydraul. Eng., 114, 134150, 1988.
  • Parker, G., and E. D. Andrews, Sorting of bed load sediments by flow in meander bends, Water Resour. Res., 21, 13731391, 1985.
  • Parker, G., and H. Johannesson, Observations on several recent theories of resonance and overdeepening in meandering channels, in River Meandering, edited by S. Ikeda, and G. Parker, pp. 379416, AGU, Washington, D. C., 1989.
  • Parker, G., K. Sawai, and S. Ikeda, Bend theory of river meanders, 2, Nonlinear deformation of finite amplitude bends, J. Fluid Mech., 115, 303314, 1982.
  • Pizzuto, J. E., Numerical simulation of gravel river widening, Water Resour. Res., 26, 19711980, 1990.
  • Rinaldi, M., and N. Casagli, Stability of streambanks formed in partially saturated soils and effects of negative pore water pressures: The Sieve River (Italy), Geomorphology, 26, 253277, 1999.
  • Schumm, S. A., River adjustments to altered hydrologic regimen—Murrumbigdee River and palaeochannels, Australia, U.S. Geol. Surv. Prof. Pap., 598, 1968.
  • Selby, M. J., Hillslope Materials and Processes, 2nd edition, Oxford Univ. Press, New York, 1993.
  • Seminara, G., and M. Tubino, Alternate bars and meandering: Free, forced, and mixed interactions, in River Meandering, edited by S. Ikeda, and G. Parker, pp. 267319, AGU, Washington, D. C., 1989.
  • Seminara, G., G. Zolezzi, M. Tubino, and D. Zardi, Downstream and upstream influence in river meandering, 2, Planimetric development, J. Fluid Mech., 438, 213230, 2001.
  • Simon, A., and S. E. Darby, Process-form interactions in unstable sand-bed river channels: A numerical modelling approach, Geomorphology, 21, 85106, 1997a.
  • Simon, A., and S. E. Darby, Bank erosion processes in two incised meander bends: Goodwin Creek, Mississippi, in Management of Landscapes Disturbed by Channel Incision, edited by S. S. Y. Wang, E. J. Langendoen, and F. D. Shields Jr., pp. 256261, Univ. of Miss., Oxford, 1997b.
  • Simon, A., W. J. Wolfe, and A. Molinas, Mass wasting algorithms in an alluvial channel model, paper presented at the 5th Federal Interagency Sedimentation Conference, Subcomm. on Sedimentation, Las Vegas, Nev., 22–29 Aug. 1991.
  • Simon, A., A. Curini, S. E. Darby, and E. J. Langendoen, Streambank mechanics and the role of bank and near-bank processes in incised channels, in Incised River Channels, edited by S. E. Darby, and A. Simon, pp. 123152, John Wiley, New York, 1999.
  • Struiksma, N., K. W. Olsen, C. Flokstra, and H. J. De Vriend, Bed deformation in curved alluvial channels, J. Hydraul. Res., 23, 5778, 1985.
  • Sun, T., P. Meakin, T. Jossang, and K. Schwarz, A simulation model for meandering rivers, Water Resour. Res., 32, 29372954, 1996.
  • Sun, T., P. Meakin, and T. Jossang, A computer model for meandering rivers with multiple bed load sediment sizes, 1, Theory, Water Resour. Res., 37, 22272241, 2001a.
  • Sun, T., P. Meakin, and T. Jossang, A computer model for meandering rivers with multiple bed load sediment sizes, 2, Computer simulations, Water Resour. Res., 37, 22432258, 2001b.
  • Sun, T., P. Meakin, and T. Jossang, Meander migration and the lateral tilting of floodplains, Water Resour. Res., 37, 14851502, 2001c.
  • Talmon, A. M., Bed topography of river bends with suspended sediment transport, Commun. Hydraul. Geotech. Eng. 92-5, Delft Univ. of Technol., Netherlands, 1992.
  • Taylor, D. W., Fundamentals of Soil Mechanics, John Wiley, New York, 1948.
  • Thakur, T. R., and A. E. Scheidegger, Chain model of river meanders, J. Hydrol., 12, 2547, 1970.
  • Thompson, A., Secondary flows and the pool-riffle unit: A case study of the processes of meander development, Earth Surf. Processes Landforms, 11, 631641, 1986.
  • Thorne, C. R., Processes and mechanisms of river bank erosion, in Gravel-Bed Rivers, edited by R. D. Hey, J. C. Bathurst, and C. R. Thorne, pp. 227271, John Wiley, New York, 1982.
  • Thorne, C. R., and R. D. Hey, Direct measurements of secondary currents at a river inflection point, Nature, 280, 226228, 1979.
  • Thorne, C. R., and A. M. Osman, Riverbank stability analysis, II, Applications, J. Hydraul. Eng., 114, 151172, 1988.
  • Thorne, C. R., and N. K. Tovey, Stability of composite river banks, Earth Surf. Processes Landforms, 6, 469484, 1981.
  • Tubino, M., and G. Seminara, Free-forced interactions in developing meanders and suppression of free bars, J. Fluid Mech., 207, 131159, 1990.
  • Whiting, P. J., and W. E. Dietrich, Experimental studies of bed topography and flow patterns in large amplitude meanders, 1, Observations, Water Resour. Res., 29, 36053622, 1993a.
  • Whiting, P. J., and W. E. Dietrich, Experimental constraints on bar migration through bends: Implications for meander wavelength selection, Water Resour. Res., 29, 10911102, 1993b.
  • Yang, C. T., and S. Wan, Comparison of selected bed-material formulas, J. Hydraul. Eng., 117, 973989, 1991.