High-resolution bathymetry at centimeter-scale accuracy acquired with a multibeam echo sounder system revealed the existence of barchanoid-shaped large (i.e., length 10–100 m) to very large (i.e., length >100 m) dunes in the Grådyb tidal inlet channel in the Danish Wadden Sea. The development of these dunes is due to an increase in dune celerity from 12 m/yr in the center of the channel to around 30 m/yr at the sides. This increase in dune celerity can be explained by the fact that dune heights decrease from 3.1 m in the center of the channel to 1.4 m at the sides, as a smaller sediment volume has to be moved per unit time for equal dune celerity. Water depth is uniform across the channel. Likewise, high-resolution acoustic Doppler current profiler measurements across the channel showed a uniform distribution of both ebb and flood flow. Thus no correlation between dune dimensions and water depth or flow velocity was established. Instead, high-accuracy bed sampling along the crests of the dunes showed a decrease in mean grain size from 0.63 mm in the center to 0.36 mm at the sides of the channel. The decrease in dune height is ascribed to this decrease in grain size, given that flow depth and flow velocity are uniform across the channel. The lateral decrease in grain size is suggested to result from sorting effects by secondary currents directed from the center toward the sides of the channel in the trough/lee side region of the barchanoid-shaped dunes.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.
 Tidal inlets are narrow natural channels that connect the open sea with a lagoon, as is often the case in barrier-island systems. The channel beds are typically covered with bed forms [Flemming and Davis, 1992; Hennings et al., 2004], the dimensions of which are controlled by the local hydrodynamics and sediment characteristics [Allen, 1982; Flemming, 2000a, 2000b]. Because of the generally narrow shape of tidal inlets, the flow velocities are often high (>1 m/s) and bed material is accordingly composed of sandy material [Flemming and Davis, 1992]. To understand the dynamics of bed forms, numerous studies have been conducted in rivers [e.g., Sukhodolov et al., 1998; Carling et al., 2000], in tidal environments [e.g., Dalrymple et al., 1978; Harbor, 1998] and on the continental shelf [e.g., Flemming, 1978; Ardhuin et al., 2002]. However, earlier studies have primarily been based on single longitudinal profiles [e.g., Van den Berg, 1987; Bartholdy et al., 2002], which have revealed rather little about the lateral shape of dunes. A few exceptions include the Fraser River, Canada, where Kostaschuk and Villard  observed dunes with a curved, concave downstream planform with 300 m long crest lines. Carling et al.  observed barchan dunes in the River Rhine, Germany, extending approximately 120 m across the channel. Recently, Dinehart  described dunes in the San Joaquin River, United States, with crests oriented about 45° from the banks. Barchanoid-shaped dunes can also be identified on the bathymetric data presented by Abraham and Pratt  from the Upper Mississippi River, United States. Nevertheless, these detailed field studies still focus on the longitudinal dune patterns and not on the lateral shapes of the dunes. Only one recent flume study has described the lateral flow distribution over sinuous-crested three-dimensional dunes [Maddux et al., 2003a, 2003b]. To the knowledge of the authors, no studies have dealt with lateral grain size patterns over dunes.
 This study investigates the potential influence of lateral, i.e., cross-channel, variations in water depth, flow velocity and grain size patterns on the development of subaqueous barchanoid-shaped dunes in the Grådyb tidal inlet channel in the Danish Wadden Sea (Figure 1). The term barchanoid is solely used to describe the lateral shape of the dunes and the net direction of migration since the flow is not unidirectional but bidirectional. In addition, there is an abundance of sediment, no lack; and the dunes are thus not migrating over firm ground.
2. Study Area
 The Grådyb tidal inlet is located on the Danish west coast between the barrier spit of Skallingen to the northwest and the barrier island of Fanø to the southeast. It connects the northernmost tidal basin of the Wadden Sea with the adjacent North Sea (Figure 1).
 The tides are semidiurnal with a mean tidal range of about 1.5 m and a tidal prism in the order of 150 × 106 m3 [Bartholdy and Anthony, 1998]. The width of the channel is roughly 1 km and the mean depth is 10–13 m. The channel is ebb-dominated with maximum ebb and flood current velocities around 1.50 m/s and 1.25 m/s, respectively [Bartholdy and Anthony, 1998]. The bed of the channel is composed of sand with mean grain sizes ranging from 0.3 to 0.7 mm. There are two sediment sources in the area; one being the Pleistocene cliffs lining the mainland in the landward part of the back-barrier tidal basin (Figure 1), it supplies medium to coarse sand. The other, which supplies fine sand to the tidal inlet, is located in the nearshore region of the open coast [Bartholdy et al., 2002].
3.1. Surveys and Instruments
 Bathymetric surveys were conducted in a 1600 × 650 m section of the channel (for location, see Figure 1) on 10 September 2002 and 11 July 2003. The bathymetric data were recorded using a Seabat 8125™ (RESON) multibeam echo sounder (MBES) system operating at 455 kHz and the 6042 v. 7™ (RESON/QPS) data collecting and processing software package. The vertical resolution of the MBES system is in a subcentimeter scale (http://www.reson.com). The lateral resolution is a function of water depth and vessel speed. For instance, a water depth of 15 m results in an across-track resolution of 0.13–0.52 m due to the across-track beam width of 0.5°; at a vessel speed of 2.6 m/s (5 kn) the along-track resolution is 0.10 m. Therefore a cell size of 0.5 × 0.5 m was chosen for the gridding of the bathymetric data. The MBES system was coupled with an AQUARIUS 5002™ (THALES/DSNP) dual frequency (L1/L2) Long Range Kinematic (LRK™) Global Positioning System (GPS). The vertical and lateral accuracy of the positioning system is better than 0.05 m [Lutz and Gounon, 2001]. Altitudes are presented in relation to UTM32 WGS84 map projections. Corrections for ship movements were applied using an Octans Surface™ (IXSEA OCEANO) gyrocompass and motion sensor.
 Flow velocities were measured along cross section NE over 10 hours of a tidal period, as well as at station C over a whole tidal period around spring tide on 3 July 2004 (for locations, see Figure 2). Along cross section NE the flow velocity data were collected using a Workhorse Sentinel™ (RDI) acoustic Doppler current profiler (ADCP) operating at 1200 kHz and the WinRiver™ (RDI) software package. The vertical resolution of the ADCP was set to 0.25 m and the lateral resolution is approximately 5 m at a ping rate of 2 Hz and a vessel speed of 2.6 m/s (5 kn). At station C, the flow velocity data were collected using a Niskin 6011 MKII winged current meter attached to a submerged mooring system. The current meter was located approximately 4 m above the bed at a water depth varying between 10 and 12 m. Flow velocity values were recorded every 5 min, being averaged over 40 discrete measurements in each case.
 Bed material was collected from bed form crests along the five transects N2-S2 (for locations, see Figure 2) on 14 July 2003 using a Shipek™ grab sampler. Sampling positions were determined by the high-accuracy positioning system described above. The drift of the grab sampler during lowering through the water column determines the inaccuracy in the sampling positioning, which was assessed to be better than 2 m based on the water depths and the observed cable angles.
3.2. Bed Form Dimensions and Celerities
 Bed form dimensions and celerities were determined from the gridded bathymetry in 2002 and 2003 along the five transects N2-S2. Only bed forms with crests extending across the entire channel in both 2002 and 2003 were considered. Bed form length L has been defined as the trough-to-trough distance with the location of a trough defined as the lowest point of the lee (or stoss) side of a bed form. Bed form height H was determined as the vertical distance from the crest to the line defining the bed form length. The location of the crest was defined as the highest point along the bed form. However, there were a few exceptions (see Figures 2 and 3) where the determined crests differed from the highest points, but instead displayed a secondary maximum along the bed forms. These departures were due to the fact that the crests extending across the entire channel in both 2002 and 2003, in a few cases, deviated from the highest points along the bed forms in one of the two years. The effect on the calculated bed form heights, though, was insignificant, as the deviations were small compared to the heights of the bed forms. Bed form volume per unit width V was calculated by integrating over the area above the line defining the bed form length. The bed form shape factor β was then calculated by relating the bed form volume per unit width to the product of bed form length and height (β = V/LH). Bed form celerity c was calculated for each bed form as the average movement of the troughs and the crest from 2002 to 2003. The bed form celerities are presented in meters per year although the calculations are based on two surveys only 10 months apart. The bed forms have been described according to the classification recommended by Ashley , where ripples (L < 0.6 m) and dunes (L > 0.6 m) are distinguished on the basis of bed form length, dunes being further divided into categories of small (L = 0.6–5 m), medium (L = 5–10 m), large (L = 10–100 m) and very large (L > 100 m).
3.3. Water Depths and Flow Velocities
 The average water depth D relative to mean low water springs (MLWS) was also determined along transects N2-S2 based on the bathymetric grids from 2002 and 2003. Furthermore, average water depths were calculated in discrete time steps over a tidal period along the part of cross section NE bounded by transects N2 and S2 (for location, see Figure 2) likewise based on the bathymetric grids from 2002 and 2003. Subsequently, the average cross-section water depths were used in the predictions of bed load transport.
 Flow velocities were measured along cross section NE at approximately half-hourly intervals. In each case, the profile was run twice (10–15 min in total) with the repetition serving as a quality control of the data, besides increasing the lateral resolution of data points. At each measuring point along the cross section, the mean flow velocity (depth averaged) U was determined as the ensemble average flow velocity. These point mean flow velocities were then used to calculate the average mean flow velocity in the part of cross section NE bounded by transects N2 and S2. Relating these average cross-section mean flow velocities to the flow velocities measured at station C revealed a significant linear correlation with the regression line UNE = 1.03uC (r = 0.992, n = 20, p < 0.0005). This regression was used to extrapolate the 10-hour measurements along cross section NE to cover the entire tidal period. Subsequently, the cross-section mean flow velocities were used in the predictions of bed load transport.
3.4. Grain Size Analysis
 After rinsing the samples to remove salt and washing through a 4 phi (0.063 mm) wet sieve to separate sand and silt/clay, the samples were dried in the oven at 70°C and sieved at 1/4 phi intervals. Where present, the mud fractions were collected, dried, and weighed to be subsequently added to the size distributions without being further analyzed.
 Mean grain size dMZ, phi standard deviation σI, phi skewness SkI and phi kurtosis KG of the grain size distributions were determined on the basis of the percentile statistics described by Folk and Ward .
3.5. Bed Load Transport Based on Measured Bathymetry
 Volumetric bed load transport qb was too calculated along transects N2-S2 from the measured bathymetry, as well as from classical and widely applied bed load transport formulae.
 Knowing bed form migration in conjunction with bed form dimensions, the volumetric bed load transport can be quantified according to the equation originally suggested by Simons et al. :
 When bed forms are present, the bed shear stress can be divided into a grain-related bed shear stress due to skin friction and a form-related bed shear stress due to form friction [e.g., Fredsøe and Deigaard, 1992]. The grain-related bed shear stress is the effective shear stress acting on the bed, whereas the form-related bed shear stress originates from the normal stress associated with the fluid pressure distribution upstream and downstream of the bed form crest [Van Rijn, 1993]. Since sediment is moved by the effective shear stress and is unaffected by the normal stress, only the skin friction component of the total bed shear stress should be used [Soulsby, 1997]. Four bed load transport formulae were applied to calculate volumetric bed load transport: the classical Meyer-Peter and Müller  formula and the widely applied formulae of Engelund and Fredsøe , Van Rijn [1984a], and Nielsen  developed during the last three decades. According to these formulae, the dimensionless bed load transports Φb are given byMeyer-Peter and Müller 
where θ′ is the grain-related Shield's parameter, θcr is the threshold Shield's parameter, T = (θ′ − θcr)/θcr is the excess bed shear stress parameter and D* is the particle parameter. The latter is defined as
in which s = ρs/ρ is the relative sediment density, ρs is the sediment density corresponding to that of quartz particles (2650 kg/m3), ρ is the density of water (1022 kg/m3 at a temperature of 17°C and a salinity of 31 ppt as measured on 3 July 2004), g is the acceleration due to gravity (9.81 m/s2), ν is the kinematic viscosity (1.08 × 10−6 m2/s at the temperature and salinity mentioned above) and d50 is median grain size. The threshold Shield's parameter is calculated by the formula suggested by Soulsby and Whitehouse :
The grain-related Shield's parameter is calculated by
where u′f is the friction velocity. For turbulent flow the friction velocity can be calculated from the Chézy equation:
where U is mean flow velocity (depth averaged) and C′ is the grain related Chézy roughness coefficient which for rough flow is given by
 Just as the magnitude of the flow varies during a tidal period, the direction of the flow also changes with ebb and flood. For that reason, flow velocities are considered positive during flood and negative during ebb. Consequently, bed load transport is also positive during flood while negative during ebb.
4.1. Observed Dune Dimensions and Celerities
 The bed of the Grådyb tidal inlet channel is covered with large to very large compound dunes (Figure 2). In total, 12 dunes extending across the channel in both 2002 and 2003 were identified along transects N2-S2 (Figure 2). Following the dune crests across the channel, the dunes display barchanoid shapes (Figure 2).
 Bed profiles along transects N2-S2 extracted from the bathymetric grids from 2002 and 2003 are shown in Figure 3. Dune dimensions and celerities have been calculated from these bed profiles.
 The average dune height decreases from 3.06 m in the center of the channel to 1.17 m and 1.57 m at the northern and southern side of the channel, respectively (Table 1). The average dune length, by contrast, increases from 122 m in the center of the channel to 149 m and 152 m at the northern and southern side, respectively (Table 1). The corresponding average dune volume per unit width is 147 m2 in the center of the channel, whereas at the northern and southern side it is 75 m2 and 80 m2, respectively (Table 1). The average shape factors are relatively constant across the channel, ranging from 0.33 to 0.46 and displaying no clear lateral trend (Table 1).
Table 1. Average Dune Length L, Height H, Volume per Unit Width V, Shape Factor β, Celerity c, Water Depth D, Mean Grain Size dMZ, Coarse 90th Percentile of the Grain Size Distribution d90, Phi Standard Deviation σI, Phi Skewness SkI, and Phi Kurtosis KG Along Transects N2-S2a
 Along the most southwesterly section of transects N2 and S2, large to very large compound dunes are indiscernible (Figures 3a and 3e). The average dune length and height along the most southwesterly 100 m section of transect N2 is 7.88 m and 0.41 m, respectively (Figure 3a). Along the corresponding section of transect S2, the average dune length and height is 5.16 m and 0.22 m, respectively (Figure 3e).
 A comparison of the identified dunes based on the bathymetric grids from 2002 and 2003 reveals a net ebb-directed dune migration (Figures 2 and 3). In the center of the channel the average dune celerity is 12 m/yr whereas at the northern and southern side it is 31 m/yr and 28 m/yr, respectively (Table 1).
4.2. Observed Water Depths and Flow Velocities
 The average water depth varies from 11.76 m MLWS in the center of the channel to 11.14 m MLWS and 10.63 m MLWS at the northern and southern side, respectively (Table 1). Along the part of cross section NE bounded by transects N2 and S2, the average water depth is 11.36 m MLWS with a standard deviation of 0.62 m.
 Mean flow velocities (depth averaged) along cross section NE at four representative stages during a tidal period around spring tide are shown in Figure 4 (the exact times of the four measurements relative to the tidal period are marked with dots in Figure 5). Positive values refer to flood flow and negative values to ebb flow. Around maximum flood, the cross-section mean flow velocity in the part bounded by transects N2 and S2 is 1.04 m/s with a standard deviation of 0.10 m/s. Close to slack water at the end of the flood phase, the cross-section mean flow velocity is 0.28 m/s with a standard deviation of 0.07 m/s. At the beginning of the ebb phase, the cross-section mean flow velocity is 0.16 m/s with a standard deviation of 0.05 m/s. No measurements are available along cross section NE around maximum ebb flow. However, the measurement closest to maximum ebb displays a cross-section mean flow velocity of 0.97 m/s with a standard deviation of 0.09 m/s. Considering the entire 10-hour measurements during the tidal period, the standard deviations of the cross-section mean flow velocities range from 0.05 m/s to 0.12 m/s with the highest standard deviations around maximum flood and ebb and the lowest close to slack water.
 The average mean flow velocities and corresponding average water depths in the part of cross section NE bounded by transects N2 and S2 over a tidal period around spring tide are shown in Figure 5. Cross-section mean flow velocities calculated from the cross-section measurements are shown with circles and dots. The extrapolation of the curve is determined from the measurements at station C. The cross-section mean flow velocities during flood and ebb reach maximum values of 1.08 m/s and 1.32 m/s, respectively.
4.3. Observed Grain Sizes
 Statistics of the bed material collected from dune crests along transects N2-S2 are presented in Figure 6. As examples, the frequency curves of the grain size distributions from the crests of dune 4 and 12 along transects N2-S2 are shown in Figure 7, being representative of grain size distributions across the entire dune field. The average mean grain size decreases from 0.629 mm in the center of the channel to 0.357 mm and 0.362 mm at the northern and southern side of the channel, respectively (Figure 6a and Table 1). In addition, there is a decrease in mean grain size along the channel from northeast to southwest (Figure 6a). The phi standard deviation, i.e., sorting, of the grain populations across the channel is relatively uniform (Figures 7a and 7b and Table 1), whereas it decreases along the channel from northeast to southwest (Figures 6b, 7a, and 7b), i.e., changing from moderately well sorted to well sorted [after Folk, 1974]. The phi skewness, i.e., sorting in the tails of the grain population, varies from near symmetrical to negative (coarse) skewed [after Folk, 1974], showing signs of increasing negative skewness from the center toward the sides of the channel (Figure 6c and Table 1). The phi kurtosis, i.e., degree of sharpness or peakedness, of the grain size distributions is relatively uniform both across and along the channel (Figure 6d and Table 1).
5. Dune Dynamics
5.1. Development of Barchanoid-Shaped Dunes
 The observed dune migration in the survey area reveals an increase in dune celerity from the center toward the sides of the channel (Table 1). This inevitably results in the development of barchanoid-shaped dunes as also observed in the dune field (see Figure 2). Furthermore, a decrease in dune height (size) was observed from the center toward the sides of the channel (Table 1). This suggests that the increase in dune celerity from the center toward the sides of the channel is a result of the decrease in dune height (size) away from the center of the channel. This can be explained by the fact that a smaller volume of sediment has to be moved at the sides per unit time for equal dune celerity. Plotting dune celerity against dune height (Figure 8) confirms this yielding significant logarithmic relationships when using both single values for individual dunes (r = 0.560, n = 49, p < 0.0005) as well as average values for transects N2-S2 as given in Table 1 (r = 0.813, n = 5, p < 0.05). The regression line of the logarithmic relationship when using single values for individual dunes is shown in Figure 8, i.e., c = −14.83lnH + 26.68 with H in m and c in m/yr.
5.2. Factors Controlling Dune Size
 The scaling factors controlling the size of dunes have been argued to be grain size– and flow velocity–dependent, along with water depth as a limiting factor assuming an abundance of sediment [Flemming, 2000a]. The dunes in the Grådyb tidal inlet channel are not starved and there is a general abundance of sediment in the area [Bartholdy et al., 2002]. The water depth across the channel is nearly uniform, as illustrated by the observed average water depths in transects N2-S2 (Table 1). In addition, the standard deviation of the water depths along the part of cross section NE bounded by transects N2 and S2, i.e., 0.62 m is low. The flow velocity across the channel during both ebb and flood is also practically uniform. This is demonstrated by the low standard deviations of the cross-section mean flow velocities in the part of cross section NE bounded by transect N2 and S2, i.e., 0.05–0.12 m/s, based on the 10-hour measurements during a tidal period. This implies that the decrease in dune height from the center toward the sides of the channel (Table 1) is a result of the decrease in mean grain size away from the center of the channel (Table 1). This is confirmed by plotting dune height against mean grain size (Figure 9) which yields significant linear relationships, both when using single values for individual dunes (r = 0.798, n = 25, p < 0.0005) and when using average values for transects N2-S2 as given in Table 1 (r = 0.958, n = 5, p < 0.01). The regression line of the linear relationship when using single values for individual dunes is shown in Figure 9, i.e., H = 4.70dMZ − 0.12 with dMZ in mm and H in m.
5.3. Factors Controlling Grain Size Variability
 The bathymetric data reveal asymmetric small to large dunes located in the trough/lee side region of the large to very large dunes, indicating the existence of secondary sediment transport paths as a result of secondary currents directed from the center toward the sides of the channel (Figure 10).
 According to McLaren  and McLaren and Bowles , sediment in transport will decrease in mean grain size, i.e., become finer, decrease (or not increase) in standard deviation, i.e., become better sorted, and become more negatively skewed, i.e., coarse tailed, in the direction of transport. In the ebb-dominated Grådyb tidal inlet channel this model applies well with mean grain size and standard deviation decreasing in the direction of ebb flow as well as the distributions being primarily negatively skewed (Figures 6 and 7). Laterally from the center toward the sides of the channel there is also a decrease in mean grain size, a constant or decreasing standard deviation and a primarily increasing negative skewness (Figures 6 and 7 and Table 1). Applying the McLaren model laterally moreover supports the existence of secondary currents resulting in a secondary sediment transport directed from the center toward the sides of the channel.
 As already mentioned, medium to coarse sand is supplied to the system from the Pleistocene cliffs lining the mainland in the landward part of the back-barrier tidal basin (see Figure 1), whereas fine sand is brought in from the nearshore region of the open coast [Bartholdy et al., 2002]. This setup provides the components needed for the lateral grain size pattern observed in the Grådyb tidal inlet channel. The Pleistocene cliff sand may be transported seaward in bed load by the dominating ebb flow [Bartholdy et al., 2002] resulting in a fining, better sorting, and negatively skewing of the grain population. In addition the finer fractions of the Pleistocene cliff sand may be transported laterally in bed load or intermittent suspension from the center toward the sides of the channel by the suggested secondary currents. The nearshore fine sand introduced to the system by each flood may undergo a similar transport mechanism.
5.4. Dune Splitting
 The average dune dimensions in the center of the channel follow the height-length relationship suggested by Flemming  (Figure 11). However, this is not the case closer to the channel sides where the dunes get lower and longer (Table 1). The dune dimensions along the most southwesterly 100 m section along transects N2 and S2, where the large to very large compound dunes were indiscernible, again follow the relationship suggested by Flemming  (Figure 11). This implies that the large to very large dunes at the sides of the channel are adjusting to the decrease in mean grain size by splitting up into smaller dunes.
6. Bed Load Transport
 Average volumetric bed load transport along transects N2-S2, calculated by insertion of measured dune dimensions and celerities in equation (1), are shown in Table 2. In the center and along the sides of the channel, the bed load transport is practically equal with an average value of 16 m2/yr, whereas along transect N1 and S1 it only amounts to 50% of this value with an average around 8 m2/yr (Table 2).
Table 2. Volumetric Bed Load Transport qb Along Transects N2-S2 Calculated by Insertion of Measured Dune Dimensions and Celerities in Equation (1) as Well as Predicted From the Bed Load Transport Formulae in Equations (2)–(5)a
 As shown above, water depth as well as flow velocity during both ebb and flood are practically uniform. Bedload transport was predicted along transects N2-S2 at discrete time steps by insertion and substitution in equations (2)–(11) using the cross-section mean flow velocities and water depths shown in Figure 5 together with the grain size values given in Table 1. Integrating over the tidal period and calculating the difference by subtraction yields the net bed load transport as well as the transport direction. In Figure 12 the prediction of bed load transport along transect C1 using the classical formula of Meyer-Peter and Müller  (equation (2)) is shown as an example of this procedure. In addition, the net ebb-directed bed load transport (Figure 12b) documents the ebb dominance, i.e., the asymmetry and migration direction of the dunes in the Grådyb tidal inlet channel are the result of the higher flow velocities during the ebb (Figure 5).
 Assuming that the tidal period at spring tide on the 3rd of July 2004 is representative of an entire year, the predicted bed load transport over the tidal period was extrapolated to a yearly budget using a tidal period duration of 12 hours and 25 min. Predicted volumetric bed load transport along transects N2-S2 ranges from 75 m2/yr to 162 m2/yr according to the various bed load transport formulae (Table 2). The Meyer-Peter and Müller  formula predicts a practically uniform bed load transport across the channel ranging from 74 m2/yr to 79 m2/yr (Table 2). By contrast, the formulae of Engelund and Fredsøe , Van Rijn [1984a], and Nielsen  predict an increase in bed load transport from the center toward the sides of the channel (Table 2). Furthermore, all bed load transport prediction formulae overestimate the bed load transport calculated by insertion of measured dune dimensions and celerities in equation (1) (Table 2), the overestimates ranging from a factor 4 in the best case to 24 in the worst case.
 The development of barchanoid-shaped dunes in the Grådyb tidal inlet channel has been shown to be the result of higher dune celerities along the sides of the channel due to smaller dunes along the sides. A similar conclusion of an increase in dune celerity as a result of a decrease in dune height (size) and hence smaller sediment volumes that have to be moved was also reached by, for example, Dinehart .
 The decrease in dune height here being a function of the decrease in mean grain size is in conflict with the classical concept of factors controlling dune size. Commonly, dune height is considered to scale with water depth [Yalin, 1977; Van Rijn, 1984b]. This is not the case in the Grådyb tidal inlet channel where the decrease in dune height from the center toward the sides of the channel occurs at practically uniform water depths. The formulae predicting dune height to scale with water depth such as those of Yalin  and Van Rijn [1984b] are primarily based on data derived from flume studies where water depths are typically small compared to those in natural systems. This introduces an artificial dependency because the water depth is an upper boundary acting as a limit for dune growth. Carling et al.  observed this mechanism in the River Rhine where a water depth limitation on dune heights was seen at shallow water depths. However, in natural systems where water depths are generally much larger than dune height no dependency of water depth on dune height is observed [Kuijpers et al., 2002].
 Dunes varying in height have been observed side by side in situations where the flow is characterized by lateral flow velocity gradients [Flemming, 2000b]. In the Grådyb tidal inlet channel, mean flow velocity is laterally uniform both during ebb and flood making this argument inapplicable in this environment.
 However, a decrease in dune height due to a decrease in mean grain size is in accordance with Flemming [2000a], who theoretically shows that the larger the grain size, the larger the maximum potential dune size. Flemming [2000a] argues that dune growth will terminate once flow acceleration above the dune crest reaches a grain size–dependent critical suspension velocity. This relation is confirmed by the observations in the Grådyb tidal inlet channel where dune height decreases with decreasing mean grain size. Though, near-bed flow velocity measurements at the crests of the dunes are required to confirm whether the suspension of bed material is the reason for the termination of dune growth.
 It has been shown that the relationship between dune height and mean grain size in the Grådyb tidal inlet channel is significantly positively correlated and can be described by a linear relationship. Earlier, Bartholdy et al.  likewise established a significant positively correlated relationship, but expressed by a power function based on two separate bed sample sets taken with a Van-Veen grab from the same study area in 1992 and 1999. The power function was derived from randomly positioned samples with mean grain sizes ranging from 0.33 mm to 0.56 mm, whereas the linear function established in this study is based solely on crest samples with mean grain sizes covering the range from 0.33 mm to 0.73 mm. The importance of sampling position may be exemplified by additional bed samples collected from the troughs and backs of 3 dunes in transect C1. These samples revealed an average mean grain size in the troughs, on the backs and on the crests of 0.488 mm, 0.523 mm and 0.629 mm, respectively, which illustrates the importance of comparable sampling positions when analyzing the data. The shift in the descriptive relationship, from a power function to a linear function, can be explained by the inaccuracy in sampling positioning during earlier surveys since Bartholdy et al.  most likely underestimated the related mean grain size due to the low probability of a randomly positioned sample to be located at the dune crest. The physical explanation of why the relationship is linear is currently unknown to the authors.
 Concerning cross-channel distributions in grain size no earlier studies have been found. The observations from the Grådyb tidal inlet channel showing a lateral variability in grain sizes along the dune crests is, to the knowledge of the authors, the first time that such patterns have been documented.
 Recently, however, Maddux et al. [2003a, 2003b] conducted a series of detailed measurements of unidirectional turbulent open channel flow over fixed, artificial, sinuous-crested three-dimensional (3-D) dunes in a laboratory flume. They found that the flow was topographically steered by the 3-D features and that the largest measured cross-stream flow velocities were in the troughs with most of the cross-stream flow occurring close to the bed. Although the flume experiments were carried out in clear water without moveable bed material, they nevertheless show the existence of secondary currents in the troughs of barchanoid-shaped dunes and thereby support the suggestion of the existence of secondary transport paths in the troughs.
 Dune splitting as an adjustment process to changing conditions has earlier been observed in the course of the flow velocity reduction from spring to neap tide where larger dunes split up into smaller ones with the larger spring-tide dunes still being discernible at neap tide [Flemming and Davis, 1992]. Likewise the large to very large dunes along the sides of the Grådyb tidal inlet channel are adjusting by splitting up into smaller dunes, however, in this case due to a decrease in mean grain size.
 Concerning the discrepancy between measured and predicted bed load transport, part of the overestimation is certainly due to the fact that the tidal period around spring tide on 3 July 2004 is unrepresentative of the general dynamics in the Grådyb tidal inlet channel, seeing that the predicted bed load transport around spring tide undoubtedly exceeds the corresponding transport around neap tide considerably. An additional reason for the overestimation is probably that transport processes in nature are not always well described by the currently available bed load transport prediction formulae, which have all been calibrated on the basis of flume studies. Soulsby  earlier emphasized the fact of transport formulae being based on incorrect assumptions and found discrepancies up to a factor of four when using various published equations. He further argues that although bed load transport responds quickly to changes in, e.g., flow velocity and water depth, and hence justifying an approach based on quasi-equilibrium transport, a calculation based on dune dimensions and celerities is recommended, especially in unsteady flows as found in tidal environments. The lateral distribution of bed load transport with lower values between the center and along the sides of the channel may be an effect of the suggested secondary currents and related transport from the center toward the sides of the channel. Nonetheless, a higher measuring frequency with better resolved near bed dynamics is needed to shed more light on these processes occurring oblique to the main current and at a lower order of magnitude in flow velocities.
 On the basis of the analysis of bathymetry, flow velocity and grain size in a dune field section of the Grådyb tidal inlet channel in the Danish Wadden Sea, the following conclusions are reached.
 1. Dune migration is net ebb-directed and increases from the center toward the sides of the channel resulting in the development of barchanoid-shaped dunes.
 2. The increase in dune celerity is a result of the corresponding decrease in dune height (size) from the center toward the sides of the channel, because smaller volumes of sediment have to be moved at the sides per unit time for equal dune celerity.
 3. The decrease in dune height is due to an equivalent decrease in grain size from the center toward the sides of the channel, in view of the fact that water depth and flow velocity during both ebb and flood are practically uniform across the channel. The grain size control on dune height may be due to the fact that flow velocities at the dune crests reach the suspension criteria of the bed material which then terminates further dune growth as theoretically proposed by Flemming [2000a]; but near-bed flow velocity measurements at the crests of the dunes are required to test this hypothesis.
 4. The decrease in grain size is suggested to be the sorting effect of secondary currents in the trough/lee side region directed from the center toward the sides of the channel, supporting the transport of the finer sediment fractions.
 5. The more rapidly migrating flanks of the barchanoid-shaped dunes seems to be an adjustment to the decrease in grain size from the center toward the sides of the channel, causing the dunes to split up into smaller forms.
 6. The net ebb-directed bed load transport, calculated from dune dimensions and celerities, is lower between the center and along the sides of the channel. This lateral distribution of bed load transport is unresolved by the classical Meyer-Peter and Müller  and the widely applied formulae of Engelund and Fredsøe , Van Rijn [1984a] and Nielsen . In addition, these bed load transport formulae over-predict the bed load transport as calculated from dune dimensions and celerities.
bed form celerity, m/yr.
grain related Chézy roughness coefficient, m0.5/s.
mean grain size, m (or mm).
median grain size, m (or mm).
coarse 90th percentile of the grain size distribution, m (or mm).
water depth, m
acceleration due to gravity, m/s2.
bed form height, m.
grain roughness, m.
bed form length, m.
volumetric bed load transport, m2/yr.
relative sediment density
excess bed shear stress parameter.
friction velocity, m/s.
mean flow velocity (depth averaged), m/s.
bed form volume per unit width, m2.
grain-related Shield's parameter.
threshold Shield's parameter.
water density, kg/m3.
sediment density, kg/m3.
phi standard deviation.
kinematic viscosity, m2/s.
dimensionless bed load transport.
 This study was supported by the German Science Foundation. The captain and crew of the RV Senckenberg are thanked for their expertise and unfailing good spirits during the cruises. Also appreciated is the field assistance of Elke Tilch and Anders Bartholdy. Nicol Mahnken-Roetzer, Sonja Heinrich, and Wolfgang Nenno are thanked for assisting in the laboratory. Finally, the quality of the manuscript improved from valuable comments and suggestions by two anonymous reviewers, the Associate Editor, and the Editor, who are all thanked for their thorough and engaged reviews.