SEARCH

SEARCH BY CITATION

References

  • Abad, J. D., and M. H. Garcia (2009a), Experiments in a high-amplitude Kinoshita meandering channel: 1. Implications of bend orientation on mean and turbulent flow structure, Water Resour. Res., 45, W02401, doi:10.1029/2008WR007016.
  • Abad, J. D., and M. H. Garcia (2009b), Experiments in a high-amplitude Kinoshita meandering channel: 2. Implications of bend orientation on bed morphodynamics, Water Resour. Res., 45, W02402, doi:10.1029/2008WR007017.
  • Allan, J. D., and M. M. Castillo (2007), Stream ecology: Structure and function of running waters, 2nd ed., Springer, ISBN140205582X.
  • Bagnold, R. A. (1960), Some aspects of the shape of river meanders, U.S. Geol. Surv. Prof. Pap. 282-E, U.S. Geol. Survey, Washington, D. C.
  • Bathurst, J. C., C. R. Thorne, and R. D. Hey (1979), Secondary flow and shear stress at river bends, J. Hydrol. Div., ASCE, 105(10), 12771295.
  • Blanckaert, K. (2009), Saturation of curvature induced secondary flow, energy losses and turbulence in sharp open channel bends. Laboratory experiments, analysis and modeling, J. Geophys. Res., 114, F03015, doi:10.1029/2008JF001137.
  • Blanckaert, K., and H. J. de Vriend (2003), Nonlinear modeling of mean flow redistribution in curved open channels, Water Resour. Res., 39(12), 1375, doi:10.1029/2003WR002068.
  • Blanckaert, K., and H. J. de Vriend (2004), Secondary flow in sharp open channel bends, J. Fluid Mech., 498, 353380.
  • Blanckaert, K., and H. J. de Vriend (2005a), Turbulence characteristics in sharp open channel bends, Phys. Fluids, 17, 055102, doi:10.1063/1.1886726.
  • Blanckaert, K., and H. J. de Vriend (2005b), Turbulence structure in sharp open channel bends, J. Fluid Mech., 536, 2748.
  • Blanckaert, K., and H. J. de Vriend (2010), Meander dynamics: A nonlinear model without curvature restrictions for flow in open-channel bends, J. Geophys. Res., doi:10.1029/2009JF001301, in press.
  • Blanckaert, K., and W. H. Graf (2001), Experiments on flow in an open channel bend: Mean flow and turbulence, J. Hydraul. Eng., 127(10), 835847.
  • Blanckaert, K., and W. H. Graf (2004), Momentum transport in sharp open channel bends, J. Hydraul. Eng., 130, 186198.
  • Blanckaert, K., and U. Lemmin (2006), Means of noise reduction in acoustic turbulence measurements, J. Hydraul. Res., 44, 317.
  • Booij, R. (2003), Measurements and large eddy simulation of flows in some curved flumes, J. Turbulence, 4(1), 008.
  • Boussinesq, J. (1868), Mémoire sur l'influence de frottement dans les mouvements réguliers des fluides; XII - Essai sur le mouvement permanent d'un liquide dans un canal horizontal à axe circulaire, J. Math. Pure Appl., série 2 (Tome XIII), 413.
  • Camporeale, C., P. Perona, A. Porporato, and L. Rodolfi (2007), Hierarchy of models for meandering rivers and related morphodynamic processes, Rev. Geophys., 45, RG1001, doi:10.1029/2005RG000185.
  • Chow, V. T. (1959), Open Channel Hydraulics, Mc Graw-Hill.
  • Clevis, Q, G. E. Tucker, G. Lock, S. T. Lancaster, N. Gasparini, A. Desitter, and R. L. Brass (2006), Geoarchaeological simulation of meandering river deposits and settlement distributions: A three-dimensional approach, Geoarchaeology, 21, 843874.
  • Cojan, I., O. Fouche, S. Lopez, and J. Rivoirard (2005), Process-based reservoir modeling in the example of meandering channel, in Quantitative Geology and Geostatistics, edited by O. Leuangthong, and V. C. Deutsch, vol. 14, part 1–2, 61619.
  • Crosato, A. (2008), Analysis and modelling of river meandering, PhD thesis, Delft University of Technolgy, Delft, Netherlands.
  • de Boor, C. (1978), A Practical Guide to Splines, Springer, New York.
  • de Vriend, H. J. (1977), A mathematical model of steady flow in curved shallow channels, J. Hydraul. Res., 15(1), 3754.
  • de Vriend, H. J. (1981), Steady flow in shallow channel bends, Rep. 81-3, Lab. of Fluid Mech, Dep. of Civ. Eng., Delft Univ. of Technol., Delft, Netherlands.
  • de Vriend, H. J., and H. J. Geldof (1983), Main flow velocity in short and sharply curved river bends, Report No. 83-6, Lab. Fl. Mech., Dept. Civ. Eng., Delft Univ. Techn., Delft.
  • de Vriend, H. J., and F. G. Koch (1978), Flow of water in a curved open channel with a fixed uneven bed. T.O.W. Rep. R657-VI/M1415-II, Delft Hydraulics Lab., Delft Univ. Techn., Netherlands.
  • de Vriend, H. J., and N. Struiksma (1984), Flow and bed deformation in river bends, in River Meandering, edited by C. M. Elliot, pp. 810828, ASCE, New York.
  • Dietrich, W. E., and J. D. Smith (1983), Influence of the point bar on flow through curved channels, Water Resour. Res., 19(5), 11731192.
  • Dietrich, W. E., and P. Whiting (1989), Boundary shear stress and sediment transport in river meanders of sand and gravel, in River Meandering, Water Resour. Monogr. Ser., vol. 12, edited by S. Ikeda, and G. Parker, pp. 150, AGU, Washington, D. C.
  • Einstein, H. A., and J. A. Harder (1954), Velocity distribution and the boundary layer at channel bends, Trans. AGU, 35(1), 114120.
  • Engelund, F. (1974), Flow and bed topography in channel bends, J. Hydraul. Div., ASCE, 100(HY11), 16311648.
  • Engelund, F., and E. Hansen (1967). A Monograph on Sediment Transport in Alluvial Streams, Teknisk Vorlag, Copenhagen, Denmark.
  • Fargue, L. (1868), Etude sur la corrélation entre la configuration du lit et la profondeur d'eau dans les rivières à fond mobile, Annal. des Ponts et Chaussées, 38, 3492.
  • Ferguson, R. I., D. R. Parsons, S. N. Lane, and R. J. Hardy (2003), Flow in meander bends with recirculation at the inner bank, Water Resour. Res., 39(11), 1322, doi:10.1029/2003WR001965.
  • Frascati, A., and S. Lanzone (2009), Morphodynamic regime and long-term evolution of meandering rivers, J. Geophys. Res., 114, F02002, doi:10.1029/2008JF001101.
  • Frothingham, K. M., and B. L. Rhoads (2003), Three-dimensional flow structure and channel change in an asymmetrical compound meander loop, Embarras River, Illinois, Earth Surf. Processes Landforms, 28(6), 625644.
  • Hickin, E. J. (1977), Hydraulic factors controlling channel migration, in Research into Fluvial Systems, Proceedings of the 5th Guelph Geomorphology Symposium, edited by R. E. Davidson-Arnott, and W. Nickling, pp. 5972, Geobooks, Norwich.
  • Hodskinson, A., and R. I. Ferguson (1998), Numerical modelling of separated flow in river bends: Model testing and experimental investigation of geometric controls on the extent of flow separation at the concave bank, Hydrol. Processes, 12, 13231338.
  • Hooke, R. L. (1974), Shear-stress and sediment distribution in a meander bend, Tech. Rep. UNGI RAPPORT 30, Dep. of Phys. Geogr., Univ. of Uppsala, Uppsala, Sweden.
  • Hurther, D. (2001), 3-D acoustic Doppler velocimetry and turbulence in open channel flow, PhD thesis, Ecole Polytechnique Fédérale Lausanne, Switzerland.
  • Hurther, D., and U. Lemmin (1998), A constant beam width transducer for three-dimensional Doppler profile measurements in open channel flow, Meas. Sci. Technol., 9(10), 17061714.
  • Hurther, D., and U. Lemmin (2001), A correction method for turbulence measurements with a 3-D acoustic Doppler velocity profiler, J. Atmos. Ocean. Technol., 18, 446458.
  • Ikeda, S., G. Parker, and K. Sawai (1981), Bend theory of river meanders: Part 1. Linear development, J. Fluid Mech., 112, 363377.
  • Jackson, A. D. (1992), Bedload transport and sorting in meander bends, Fall River, Rocky Mountain National Park, Colorado, Ph.D., 280 pp., Colorado State Univ., Fort Collins, Colo.
  • Kalkwijk, J. P. Th., and H. J. de Vriend (1980), Computation of the flow in shallow river bends, J. Hydraul. Res., 18, 327342.
  • Khosronejad, A., C. D. Rennie, S. A. A. S. Neyshabouri, and R. D. Townsend (2007), 3-D numerical Modeling of flow and sediment transport in laboratory channel bends, J. Hydrol. Eng., 133, 11231134.
  • Kikkawa, H., S. Ikeda, and A. Kitagawa (1976), Flow and bed topography in curved open channles, J. Hydraul. Div., 102(9), 13271342.
  • Leeder, M. R., and P. H. Bridge, (1975), Flow separation in meander bends, Nature, 253, 338339, 1975.
  • Lemmin, U., and T. Rolland (1997), Acoustic velocity profiler for laboratory and field studies, J. Hydraul. Eng., 123(12), 10891098.
  • Leopold, L. B., and M. G. Wolman (1960), River meanders, Bull. Geol. Soc. Am., 71, 769794.
  • Markham, A. J., and C. R. Thorne (1992), Geomorphology of gravel-bed river bends, in Dynamics of Gravel-Bed Rivers, edited by P. Billi et al., pp. 433456, Wiley.
  • Mockmore, C. A. (1943), Flow around bends in stable channels, Transactions, 109, 593628.
  • Nakano, D., and F. Nakamura (2008), The significance of meandering channel morphology on the diversity and abundance of macroinvertebrates in a lowland river in Japan, Aquatic Conserv., 18, 780798.
  • Nelson, J. E. (1988), Mechanics of flow and sediment transport over nonuniform erodible beds, PhD dissertation, 277 pp., Univ. of Washington, Seattle, Wash.
  • Nelson, J. M., and J. D. Smith (1989), Evolution and stability of erodible channel beds, in River Meandering, edited by S. Ikeda, and G. Parker, Water Resour. Monogr. Ser., vol. 12, pp. 321378, AGU, Washington, D. C.
  • Nezu, I., and H. Nakagawa (1993), Turbulence in Open Channel Flows, Balkema, Rotterdam, Netherlands.
  • Odgaard, A. J. (1986), Meander flow model, I: Development, J. Hydraul. Eng., 112(12), 11171136.
  • Odgaard, A. J., and M. A Bergs. (1988), Flow processes in a curved alluvial channel, Water Resour. Res., 24(1), 4556.
  • Rolland, T. (1994), Développement d'une instrumentation Doppler ultrasonore adaptée à l'étude hydraulique de la turbulence dans les canaux, PhD Thesis, EPFL, Lausanne, Switzerland.
  • Rozovskii, I. L. (1957), Flow of water in bends of open channels, Academy of Sciences of the Ukrainian SSR, Kiev, 1957; Israel Program for Scientific Translations, Jerusalem, 1961.
  • Ruther, N., and N. R. Olsen (2005), 3-D modeling of sediment transport in a narrow 90° channel bend, J. Hydraul. Eng., Am. Soc. Civ. Eng., 131, 917920.
  • Sekine, M., and G. Parker (1992), Bed load transport on transverse slope, J. Hydraul. Eng., Am. Soc. Civ. Eng., 118(4), 513535.
  • Shimizu, Y., and T. Itakura (1989), Calculation of bed variation in alluvial channels, J. Hydraul. Div., Am. Soc. Civ. Eng., 115(3), 367384, doi:10.1061/(ASCE)0733-9429(1989)115:3(367).
  • Smith, J. D., and S. R. McLean (1984), A model for flow in meandering streams, Water Resour. Res., 20(9), 13011315.
  • Struiksma, N., K. W. Olesen, C. Flokstra, and H. J. de Vriend (1985), Bed deformation in curved alluvial channels, J. Hydraul. Res., IAHR, 23(1), 5779.
  • Thome, C. R., S. R. Abt, and S. T. Maynord (1995), Prediction of near-bank velocity and scour depth in meander bends for design of riprap revetments, in River, Coastal and Shoreline Protection; Erosion Control Using Riprap and Armourstone, edited by C. R. Thorne et al., pp. 115133, Wiley.
  • Thomson, W. (1876), On the origin of windings of rivers in alluvial plains, with remarks on the flow of water round bends in pipes, Proc. R. Soc. London, 25, 58.
  • Tockner, K. (2007), River restoration: Linking science with application, Ecol. Civil Eng., 10, 1525.
  • Van Balen, W., W. S. J. Uijttewaal, and Blanckaert (2009), Large-eddy simulation of a mildly curved open channel flow, J. Fluid Mech., 630, 413442.
  • Van Balen, W., K. Blanckaert, and W. S. J. Uijttewaal (2010a), Analysis of the role of turbulence in curved open channel flow at different water depths by means of experiments, LES and RANS, J. Turbul., 11, N12, doi:10.1080/14685241003789404.
  • Van Balen, W., W. S. J. Uijttewaal, and K. Blanckaert (2010b), Large-eddy simulation of a curved open-channel flow over topography, Phys. Fluids, doi:10.1063/1.3459152, in press.
  • Van Bendegom, L. (1947), Eenige beschouwingen over riviermorphologie en rivierverbetering, De Ingenieur, 59(4), 111 (in Dutch).
  • van Rijn, L. C. (1984), Sediment transport, Part III: Bed forms and alluvial roughness, J. Hydraul. Eng., ASCE, 110(12), 17331754.
  • Whiting, P. J., and W. E. Dietrich (1993), Experimental studies of bed topography and flow patterns in large-amplitude meanders. I: Observations, Water Resour. Res., 29(11), 36053614.
  • Wu, W., W. Rodi, and T. Wenka (2000), 3-D numerical modeling of flow and sediment transport in open channels, J. Hydraul. Eng., Am. Soc. Civ. Eng., 126(1), 415.
  • Yeh, K. C., and J. F. Kennedy (1993), Moment model of nonuniform channel-bend flow: I. Fixed beds, J. Hydraul. Eng., 119(7), 776795.
  • Yen, C., and B. C. Yen BC (1971), Water surface configuration in channel bends, J. Hydraul. Div. Am. Soc. Civ. Eng., 97(HY2), 303321.
  • Zeng, J., G. Constantinescu, K. Blanckaert, and L. Weber (2008a), Flow and bathymetry in sharp open channel bends: experiments and predictions, Water Resour. Res., 44, W09401, doi:10.1029/2007WR006303.
  • Zeng, J., S. G. Constantinescu, and L. Weber (2008b), A 3-D non-hydrostatic model to predict flow and sediment transport in loose bed channel bends, J. Hydraul. Res., 46, 356372, doi:10.3826/jhr.2008.3328.