SEARCH

SEARCH BY CITATION

References

  • Berenger, J. P. (1996), Three-dimensional perfectly matched layer for the absorption of electromagnetic waves, J. Comput. Phys., 127, 363379.
  • Engin, A. E., W. John, G. Sommer, W. Mathis, and H. Reichl (2006), Modeling of striplines between a power and a ground plane, IEEE Trans. Adv. Packag., 29(3), 415426.
  • Engin, A. E., K. Bharath, and M. Swaminathan (2007), Multilayered Finite-Difference Method (MFDM) for modeling of package and printed circuit board planes, IEEE Trans. Electromagn. Compat., 49(2), 441447.
  • Fan, J., J. L. Drewniak, H. Shi, and J. L. Knighten (2001), DC power-bus modeling and design with a mixed-potential integral-equation formulation and circuit extraction, IEEE Trans. Electromagn. Compat., 43(4), 426436.
  • Hockanson, D. M., J. L. Drewniak, T. H. Hubing, T. P. VanDoren, F. Sha, and M. J. Wilhelm (1996), Investigation of fundamental EMI source mechanisms driving common mode radiation from printed circuit boards with attached cables, IEEE Trans.Electromagn. Compat., 38(4), 557576.
  • Kami, Y., and T. Tobana (1997), Measurement of magnetic near field on printed circuit board by using a magnetic loop antenna, paper presented at International Symposium on Electromagnetic Compatibility, Inst. of Electr. and Electron. Eng., Zurich.
  • Kayano, Y., and H. Inoue (2009), Prediction of EM radiation from a PCB driven by a connected feed cable, IEICE Trans. Commun., E92-B(6), 19201928.
  • Kayano, Y., M. Tanaka, and H. Inoue (2004), Identifying the frequency response of common-mode current on a cable attached to a PCB, IEICE Trans. Electron., E87-C(8), 12681276.
  • Kayano, Y., M. Tanaka, and H. Inoue (2005), Correspondence of common- and differential-mode components on EM radiation from surface microstrip line structure, IEICE Trans. Electron., E88-C(8), 16881695.
  • Koledintseva, M. Y., J. L. Drewniak, T. P. VanDoren, D. J. Pommerenke, M. Cocchini, and D. M. Hockanson (2008), Mutual external inductance in stripline structure, Prog. Electromagn. Res., 80, 349368.
  • Leone, M. (2003), The radiation of a rectangular power-bus structure at multiple cavity-mode resonances, IEEE Trans. Electromagn. Compat., 45(3), 486492.
  • Luebbers, R. J., K. S. Kunz, M. Schneider, and F. Hunsberger (1991), A Finite-Difference Time-Domain Near Zone to Far-Zone Transformation, IEEE Trans. Antennas Propagat., 39(4), 429433.
  • Nishida, M., Y. Toyota, K. Iokibe, R. Koga, and O. Wada (2007), Fast calculation of radiated emissions from arbitrarily shaped PCB with IC/LSI, paper presented at International Symposium on Electromagnetic Compatibility, Inst. of Electr. and Electron. Eng., Honolulu, Hawaii.
  • Paul, C. R. (1991), Introduction to Electromagnetic Compatibility, John Wiley, New York.
  • Shim, H. W., and T. H. Hubing (2005), Model for estimating radiated emissions from a printed circuit board with attached cables due to voltage-driven sources, IEEE Trans. Electromagn. Compat., 47(4), 899907.
  • Wada, O. (2003), Modeling and simulation of unintended electromagnetic emission from digital circuits, IEICE Trans. Commun., J86-B(7), 10621069.
  • Wang, Z. L., O. Wada, Y. Toyota, and R. Koga (2005), Modeling of gapped power bus structures for isolation using cavity modes and segmentation, IEEE Trans. Electromagn. Compat., 47(2), 210218.
  • Watanabe, T., O. Wada, T. Miyashita, and R. Koga (2000), Common-mode-current generation caused by difference of unbalance of transmission lines on a printed circuit board with narrow ground pattern, IEICE Trans. Commun., E83-B(3), 593599.