Our site uses cookies to improve your experience. You can find out more about our use of cookies in About Cookies, including instructions on how to turn off cookies if you wish to do so. By continuing to browse this site you agree to us using cookies as described in About Cookies.

Notice: Wiley Online Library will be unavailable on Saturday 30th July 2016 from 08:00-11:00 BST / 03:00-06:00 EST / 15:00-18:00 SGT for essential maintenance. Apologies for the inconvenience.

[1] We study statistical properties of the number of large earthquakes over the past century. We analyze the cumulative distribution of the number of earthquakes with magnitude larger than threshold M in time interval T, and quantify the statistical significance of these results by simulating a large number of synthetic random catalogs. We find that in general, the earthquake record cannot be distinguished from a process that is random in time. This conclusion holds whether aftershocks are removed or not, except at magnitudes below M = 7.3. At long time intervals (T = 2–5 years), we find that statistically significant clustering is present in the catalog for lower magnitude thresholds (M = 7–7.2). However, this clustering is due to a large number of earthquakes on record in the early part of the 20th century, when magnitudes are less certain.

If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.

[3] In parallel, recent studies show that earthquakes can be dynamically triggered by seismic waves [Hill et al., 1993; Gomberg et al., 2004; Freed, 2005]. It is not clear if large earthquakes can trigger other large earthquakes; one recent study did not find evidence of such triggering [Parsons and Velasco, 2011], although this remains an open question in seismology. If large earthquakes do cluster in time, this might suggest that large earthquakes can be dynamically triggered.

[4] We study the statistics of large (M ≥ 7) earthquakes from 1900–2011 to assess whether earthquakes deviate from random occurrence. We examine the catalog both with and without removal of aftershocks, and use transparent statistical measures to quantify the likelihood that a random process could produce the earthquake record.

2. Data and Aftershock Removal

[5] Our statistical analysis uses the USGS PAGER catalog of large earthquakes [Allen et al., 2009], supplemented with the Global CMT catalog through the end of 2011. The catalog consists of 1761 events with magnitude M > 7.0. As can be seen from the magnitude-frequency plot inFigure 1(right), this catalog adheres to the ubiquitous Gutenberg-Richter law [Gutenberg and Richter, 1954], and is complete for magnitude M > 7.0. The magnitudes in the PAGER catalog are a mix of magnitude types – the majority of events are given in moment magnitude, but events early in the century often use a different magnitude measure, such as surface wave magnitude. Because very large earthquakes are rare, any study of the statistics of this dataset is inherently limited by the small number of extremely powerful earthquakes on record.

[6] We have studied two additional catalogs, one compiled by Pacheco and Sykes [1992], and one based on the NOAA Significant Earthquake Database (National Geophysical Data Center/World Data Center (NGDC/WDC) Significant Earthquake Database, Boulder, CO, USA, available at http://www.ngdc.noaa.gov/hazard/earthqk.shtml). We find that the results depend on the catalog choice due to discrepancies in magnitude between the catalogs. Because PAGER contains more events, and the magnitudes in PAGER are the most consistent with the Gutenberg-Richter Law, we focus on PAGER in our analysis. A comprehensive study of the discrepancies between catalogs will be the subject of future work.

[7] While the PAGER catalog is the most complete record of large earthquakes, the data has limitations. First, because seismic instruments were relatively sparse in the first half of the 20th century, data for these events have larger uncertainties. Additionally, the data includes aftershocks. Aftershock removal is not trivial, and it requires assumptions that cannot be tested rigorously due to limited data.

[8] We remove aftershocks by flagging any event within a specified time and distance window of a larger magnitude main shock [Gardner and Knopoff, 1974]. We use the time window from the original Gardner and Knopoff study. The distance window should be similar to the rupture length of the main shock. However, rupture length data does not exist for the entire catalog. Therefore, we must estimate the rupture length based on magnitude. This is problematic because the catalog contains multiple types of faulting (i.e., subduction megathrust, crustal strike-slip, etc.), each with a different typical rupture length for a given magnitude. For example, the 2002M = 7.9 Denali earthquake and the 2011 M = 9.0 Tohoku Earthquake did not have substantially different rupture lengths [Eberhart-Philips et al., 2003; Simons et al., 2011] despite a large difference in seismic moment. We use an empirical rupture length formula [Wells and Coppersmith, 1994], and choose to be conservative by doubling the Wells and Coppersmith subsurface rupture length estimate for reverse faulting. We have studied various choices for this rupture length multiplicative factor, and find that doubling the rupture length estimate makes the rupture lengths large enough to be fairly conservative, but not so large as to excessively remove events from the catalog. This may remove some events from the catalog that are not aftershocks, but it will not bias our results by leaving many aftershocks in the catalog. After removal of aftershocks, the PAGER catalog is reduced to 1253 events. In this investigation, we first examine the entire catalog to draw as much information from the raw data as possible before introducing assumptions about aftershocks.

3. Statistical Analysis

[9] Our study utilizes the cumulative probability distribution of the number of large earthquakes in a fixed time interval Q_{n}. The cumulative distribution gives the probability that there are at least n earthquakes with magnitude of at least M in a given time interval T, measured in months. We compare the observed frequency distribution Q_{n} with the frequency distribution for a random Poisson process. Let the average number of large earthquakes in a time interval be α. If large earthquakes are not correlated in time, then the probability P_{n}^{rand} that there are n events during a time interval is

Pnrand=αnn!e−α.

The Poisson distribution is characterized by a single parameter, the average. We also note that the average and the variance are identical, 〈n〉 = 〈n^{2}〉 − 〈n〉^{2} = α. The cumulative distribution for a Poissonian catalog Q_{n}^{rand} is given by the following sum:

Qnrand=∑m=n∞Pmrand=∑m=n∞αmm!e−α.

Note that Q_{n}^{rand} depends on the choice of M and T, as these determine the average event rate α. We calculate Q_{n} for the earthquake data, and compare the data with the expected distribution for a Poissonian catalog Q_{n}^{rand}. Note that the cumulative distribution forms the basis of one of the statistical tests used by Shearer and Stark [2012], but here we explore many time bin sizes to see if the results depend on the choice of the time window.

[10]Figure 2 (left) shows an example of the cumulative distribution plot for the raw PAGER catalog for M = 7 and T = 12 months. The cumulative distribution Q_{n} quantifies the probability that a time window contains at least n events. Thus, the curves always begin at Q_{0} = 1, and decrease as n increases. The final point on each plot corresponds to the maximum number of events observed in the chosen time window.

[11]Figure 2 (left) shows that the frequency of large earthquakes with M ≥ 7.0 is roughly Poissonian below the average α = 15.7 events/year. However, the tail of the cumulative distribution is overpopulated with respect to the Poisson distribution. An overpopulated tail indicates that events are clustered in time. We perform this analysis for higher magnitude thresholds (M = 7.5, M = 8) and both longer and shorter time window sizes (T = 1 month, T = 60 months), and the results are shown in Figure 2 (right). The bins evenly divide the catalog into an integer number of fixed time windows: T = 1 month corresponds to 112 × 12 = 1344 bins, and T = 12 months corresponds to 112 bins. For T = 60 months, the catalog cannot be evenly divided into 5 year bins. Therefore, it is instead divided into the closest integer number of bins (22), which means that the bin size is actually slightly larger than 60 months.

[12] We find that the catalog exhibits an overpopulated tail only for M = 7. Within the M = 7 data, the overpopulation is found for all T. The strength of this overpopulation is significant because it can be a few orders of magnitude. However, the catalog at M = 7.5 and M = 8 agrees very well with the prediction for a Poissonian catalog. This is remarkable, as even with a relatively small number of earthquakes, the data is in agreement with a random distribution.

[13] To quantify the statistical significance of the overpopulation, we utilize the normalized variance:

V=n2−n2n.

An observed distribution with a strongly overpopulated tail necessarily has a large variance. Moreover, a value close to unity is expected for a catalog that is random in time, while a value larger than unity indicates clustering. Hence, the normalized variance V is a convenient, scalar, measure of clustering. The normalized variance is shown as a function of M and T in Figure 3 (left), and confirms that at M = 7 the catalog is clustered. In this analysis, we compute V with many different bin sizes, ranging from 1 month up to approximately 5 years. In each case, the number of bins is chosen to be an integer so that we always utilize the entire catalog (i.e., the time bin size is not always an integer number of months).

[14] To test whether the clustering observed in the data is statistically significant, we generate 10^{6} synthetic Poissonian catalogs with an average event rate given by α = 1761/112 events/year, the same as in the PAGER catalog. Each event is assigned a magnitude, drawn randomly from the actual catalog magnitudes with replacement. Using the 10^{6} Poissonian realizations of the earthquake catalog, we compute the average normalized variance V¯ and the standard deviation of the normalized variance δV as a function of M and T. Conveniently, the normalized variance for an ensemble of synthetic random catalogs is approximately described by a normal distribution. This makes this quantity useful for determining the statistical significance of the observed clustering. The normalized variance determined from the earthquake data V can then be expressed as a certain number of standard deviations above the mean σ,

σ=V−V¯δV.

Since V is normally distributed for an ensemble of random catalogs, we know that if the value of V determined from the data is larger than V¯ by several standard deviations, this indicates that the catalog contains statistically significant clustering.

[15] The number of standard deviations above the mean σ is shown as a function of M and T in Figure 3 (right). In the plot, red indicates statistically significant clustering, and blue indicates a variance consistent with a random catalog. This analysis verifies the results from the cumulative distribution: clustering is observed at low magnitudes (M < 7.3), while no significant clustering is observed at higher magnitudes (M ≥ 7.3). This observation is robust over time bin sizes ranging from 1 month to 5 years. Note that while the normalized variance is much larger for M = 7 and T = 60 months than for M = 7 and T = 1 month, in both cases the normalized variance is several standard deviations above the mean. This is because there is more variability in the normalized variance for longer time bins – we find that δV ∼ T^{1/2}, independent of the magnitude threshold. We stress that our analysis thus far relies on the complete earthquake record which necessarily includes aftershocks. Hence, aftershock removal is not even necessary to demonstrate that the statistics of large earthquakes with magnitude M > 7.3 show no significant clustering.

[16] We repeat the above analysis, with aftershocks removed, to test if the clustering observed for M < 7.3 is due to aftershocks. The results of the cumulative distribution analysis with aftershocks removed is shown in Figure 4. The catalog now closely follows the cumulative distribution for a Poissonian catalog for M = 7, T = 1 month, demonstrating that the clustering at short times and lower magnitudes is due to aftershocks. There is still overpopulation for M = 7 at longer times. At higher magnitudes, many of the curves appear slightly underpopulated for large numbers of events. This could be due to our conservative aftershock removal procedure, which may have removed some independent events.

[17] Calculations using synthetic catalogs and the variance measure V confirm these results. Figure 5 shows that the clustering observed for small magnitudes (M < 7.3) and short times (T < 12 months) no longer occurs once aftershocks are removed from the catalog. Interestingly, the clustering at longer time intervals (T > 24 months) persists. Most likely, this clustering is due to the fact that there is a mismatch between the event rates in the first and the second halves of the century, the former being larger by about 20%. This can be seen in Figure 1 (top left), which shows several spikes in the number of M ≥ 7 events during the first half of the century. If we divide the catalog into two time periods (1900–1955 and 1956–2011), we find that each half of the data is consistent with random earthquake occurrence, with a different rate for each half. Because magnitude estimates early in the century are subject to larger uncertainties and may be systematically overestimated [Engdahl and Villaseñor, 2002], it is not clear if this clustering is real or due to less reliable data.

4. Conclusions

[18] Our studies using the PAGER earthquake catalog demonstrate that the catalog cannot be distinguished from random earthquake occurrence. This is in agreement with several other recent studies [Michael, 2011; Shearer and Stark, 2012]. We do find evidence of clustering for M = 7 and T = 2–5 years, which was not identified in the other studies. However, we note that this clustering is due to a large number of events on record early in the 20th Century.

[19] For large events (M > 7.3), the catalog with aftershocks is well described by a process that is random in time. This is because large aftershocks are rare, and there are relatively few large events in the catalog to begin with. Because clustering due to aftershocks, which is known to be present in the data, is not detectable by our statistical tests, it is possible that there is clustering in the catalog at large magnitudes that is obscured by the small amount of data. Future studies will examine the likelihood of identifying clustering in synthetic clustered catalogs given the small amount of data in the earthquake catalog.

[20] These findings underscore that we have very little megaquake data, due to limited instrumentation. Increases in the number of seismic and geodetic instruments in recent years has led not only to the improved identification and characterization of large earthquakes, but also to the discovery of novel slip behaviors such as low frequency earthquakes [Katsumata and Kamaya 2003], very low frequency earthquakes [Ito et al., 2006], slow slip events [Dragert et al., 2001], and silent earthquakes [Kawasaki et al., 1995]. Integrating observations of other types of events with earthquake data may prove to be the key to identifying causal links between events, providing a comprehensive picture of the interactions that may underlie the physics of great earthquakes.

Acknowledgments

[21] The USGS PAGER catalog is available on the web at http://earthquake.usgs.gov/earthquakes/pager/, and the Global CMT catalog is available at http://www.globalcmt.org/. We thank Terry Wallace, Thorne Lay, Charles Ammon, and Joan Gomberg for useful comments. This research has been supported by DOE grant DE-AC52-06NA25396 and institutional (LDRD) funding at Los Alamos.

[22] The Editor thanks Andrew Michael and an anonymous reviewer for their assistance in evaluating this paper.