Notice: Wiley Online Library will be unavailable on Saturday 27th February from 09:00-14:00 GMT / 04:00-09:00 EST / 17:00-22:00 SGT for essential maintenance. Apologies for the inconvenience.
Australian Antarctic Division, Department of Sustainability, Environment, Water, Population and Communities, Kingston, Tasmania, Australia
Antarctic Climate and Ecosystems Cooperative Research Centre, University of Tasmania, Hobart, Tasmania, Australia
Corresponding author: K. M. Meiners, Australian Antarctic Division, Department of Sustainability, Environment, Water, Population and Communities, Channel Highway, Kingston, TAS 7050, Australia. (firstname.lastname@example.org)
 Sea ice core chlorophyll a data are used to describe the seasonal, regional and vertical distribution of algal biomass in Southern Ocean pack ice. The Antarctic Sea Ice Processes and Climate – Biology (ASPeCt – Bio) circumpolar dataset consists of 1300 ice cores collected during 32 cruises over a period of 25 years. The analyses show that integrated sea ice chlorophyll apeaks in early spring and late austral summer, which is consistent with theories on light and nutrient limitation. The results indicate that on a circum-Antarctic scale, surface, internal and bottom sea ice layers contribute equally to integrated biomass, but vertical distribution shows distinct differences among six regions around the continent. The vertical distribution of sea ice algal biomass depends on sea ice thickness, with surface communities most commonly associated with thin ice (<0.4 m), and ice of moderate thickness (0.4–1.0 m) having the highest probability of forming bottom communities.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.
 Sea ice is a major driver of Southern Ocean physics and biogeochemical cycles, and a structuring component of Antarctic marine ecosystems. Ranging in extent from 4 million km2 in February to 19 million km2 in September/October [Comiso, 2010], sea ice affects ocean-atmosphere exchange, is a reservoir of nutrients, and serves as a primer for phytoplankton blooms during ice retreat in spring [e.g.,Lannuzel et al., 2010; Thomas and Dieckmann, 2010]. Importantly, sea ice provides a habitat for ice-associated algae, which form distinct surface, interior and bottom communities [Arrigo et al., 2010]. Ice algal growth is strongly controlled by physical processes. Surface communities are promoted by snow loading, surface flooding by seawater and brine, and subsequent snow-ice formation [Fritsen et al., 1994, Ackley et al., 2008]. In thicker sea ice, interior communities are likely to emerge following the rafting and ridging of ice floes; which are two processes that significantly contribute to the dynamical thickening of Antarctic sea ice [Worby et al., 2008]. Scavenging of phytoplankton during ice formation and subsequent algal growth of incorporated algae may explain the occurrence of interior communities in frazil ice layers of un-deformed sea ice [Arrigo et al., 2010]. Once established, interior communities are strongly affected by the thermodynamic sea ice regime and its phase-equilibrium which regulates percolation and convection of sea ice brines, hence controlling vertical material transport within the sea ice and across the ice-water interface [Vancoppenolle et al. 2010; Saenz and Arrigo, 2012]. Bottom communities thrive in the lowermost porous parts of sea ice floes characterized by favorable brine salinities and high nutrient availability [e.g., Vancoppenolle et al., 2010].
 Ice algae contribute substantially to the total annual primary production of Southern Ocean ice-covered areas [Legendre et al., 1992; Lizotte, 2001; Arrigo et al., 2010]. However, these estimates, based on a limited suite of ice core data and relatively basic models, are highly uncertain, since the methods used cannot resolve the large temporal and spatial variability in ice algal distribution. In contrast to phytoplankton, sea ice algae cannot be observed from space, and the standard method to quantify ice algal biomass is to measure ice algal chlorophyll a(chl-a) concentrations from melted ice core sections.Dieckmann et al. published the first compilation of chl-a data from Antarctic ice cores collected from the Bellingshausen, Amundsen and Weddell Seas, providing vertically integrated chl-a values on ship-survey scales for the period 1983–1994. Under the auspices of the Scientific Committee on Antarctic Research (SCAR) Antarctic Sea Ice Processes and Climate (ASPeCt) program, we have significantly extended this effort to compile the first circum-Antarctic ice algal chl-a database, referred to as ASPeCt – Bio. In this study, these data are presented and used to i) identify large-scale spatial and temporal characteristics in Antarctic ice algal distribution, ii) explore relationships between the physical forcings and chl-a, and iii) analyze the vertical distribution of chl-a.
2. Data Description and Methods
2.1. ASPeCt – Bio
 The ASPeCt – Bio dataset is a compilation of currently available sea ice chl-a data from pack ice (i.e., excluding fast ice) cores collected during 32 cruises to the Southern Ocean sea ice zone from 1983 to 2008 (Table S1 in Text S1 in theauxiliary material). Data come from peer-reviewed publications, cruise reports, data repositories and direct contributions by field-research teams. During all cruises the chl-a concentration (inμg l−1) was measured from melted ice core sections, using standard procedures, e.g., by melting the ice at <5°C in the dark; filtering samples onto glassfibre filters; and fluorometric analysis according to standard protocols [Holm-Hansen et al., 1965; Evans et al., 1987]. Ice samples were melted either directly or in filtered sea water, which does not yield significant differences in chl-a concentration [Dieckmann et al., 1998]. The dataset consists of 1300 geo-referenced ice cores, consisting of 8247 individual ice core sections, and including 990 vertical profiles with a minimum of three sections (Table 1). The chl-a concentrations were converted to mg m−3 of sea ice (Cchl-a) by multiplying the value (in mg m−3) of melt water by a standard sea ice to seawater density ratio (917 kg m−3/1020 kg m−3 = 0.9). The chl-a content in mg m−2 (Ichl-a), that is the vertical integral of Cchl-a, is used as a proxy for the total integrated biomass.
Table 1. Main Features of the ASPeCt – Bio Database
For some cores, only the integrated chlorophyll-a is available. The profiles correspond to a total of 8247 core sections, including 990 profiles with more than two sections. Std refers to Standard Deviation.
 To analyze the vertical chl-a distribution, all profiles were linearly interpolated on a 99-layer vertical grid, conserving Ichl-a. This grid was used to (i) classify the community types (surface, internal, bottom) according to the position of the chl-a maximum and (ii) compute the percentage of Ichl-a in the surface, internal and bottom third of the ice cores (for details see Figures S1 and S2).
2.3. Seasonal Cycle of Chl-a
 The seasonal cycle of Ichl-a was analyzed relative to the 1983–2008 monthly mean seasonal cycle of NCEP air temperatures [Kalnay et al., 1996] and photosynthetically available radiation (PAR) taken over the whole Antarctic sea ice zone, excluding points where satellite ice concentrations were below 15%. The computation of PAR is based on empirical formulas from Vancoppenolle et al. , as detailed in the auxiliary material.
2.4. Chl-a Profile Shape as Function of Ice Thickness
 In order to investigate how the shape of the chl-a profiles depends on ice thickness, the probability of the occurrence of a chl-a maximum was computed using 5 vertical core sections of equal thickness and 5 core length categories. The lower limits for each bin were chosen as: 0, 0.4, 0.7, 1 and 2 m.
3. Results and Discussion
3.1. Limitations of the Data
 Limitations in the dataset relate to unavoidable biases in fieldwork: sampling is not uniform across seasons, regions or ice types. More than 80% of cores were obtained during winter (June–August, JJA) and spring (September–November, SON) periods, while the summer (December–February, DJF) and autumn (March–May, MAM) periods include relatively low numbers of cores (Table 1). The spatial coverage across the six zonal sectors around Antarctica [Worby et al., 2008] is also heterogeneous, with about 80% of the cores belonging to the Pacific, East Weddell and Amundsen/Bellingshausen sectors (Figure 1 and Table 2). Only 13 cores from a single voyage to the Indian sector were available (Table S1). Preferred sampling of un-deformed ice due to difficulties in accessing and extracting cores from deformed ice causes an additional bias. The ASPeCt – Bio mean ice core length generally agrees with the climatological mean ice thickness from the ASPeCt physical dataset [Worby et al., 2008], both on circumpolar and regional scales (see Table 2), but underestimates thickness where deformed ice is prevalent (e.g., in the West Weddell and Ross sectors). The second limitation of the ASPeCt – Bio data arises because cell-specific ice algal chl-a content varies as a function of environmental and physiological conditions, with diatom carbon to chl-a ratios ranging between 20 and >40 (g/g) [seeArrigo et al., 2010]. Hence, chl-a is an indirect measure of ice algal biomass, and will not always accurately reflect variations across different seasons, regions and habitats, but represents the most widely available measure for ice algal distribution. Despite these limitations, the ASPeCt – Bio data represents the most comprehensive measure of Southern Ocean ice algal chl-a to date, and offers valuable insights into the seasonal development, regional characteristics and vertical structure of Antarctic ice algal distribution.
Table 2. Regional pattern of vertical distribution of assemblage type and total biomass within the sea ice covera
The first row refers to the percentage of profiles classified as surface, internal and bottom type (for details see text). The other rows refer to the fraction of total biomass (as integrated chlorophyll-a) in surface, internal and bottom third of the ice cores. Profiles with less than 3 core sections are excluded.
Annual mean thickness, taken from the physical ASPeCt climatology of Worby et al. , based on 23373 observations.
Relative Number(%)of Profiles for Each Assemblage Type
Relative Contribution to Integrated Chl-a for Each Assemblage Type
3.2. Integrated Chl-a (Ichl-a)
 On a circum-Antarctic scale Ichl-a is variable, ranging from <0.1 to 89.2 mg m−2 with a mean of 6.4 ± 9.9 mg m−2 (Table 1). Low Ichl-a values are the most common: for 49.6% of the ice cores it is below 3 mg m−2 and for 29.2% it is below 1 mg m−2. Seasonal mean Ichl-a is highest in summer (DJF), declines during autumn (MAM), reaches a winter minimum (JJA) and increases again in spring (SON). Median seasonal Ichl-a, less susceptible to extreme values and therefore considerably lower than the means, show a similar seasonal distribution and indicate the robustness of the observed seasonal cycle. The seasonal features in the ASPeCt – Bio dataset are consistent with regional investigations [e.g., Fritsen et al., 1994; Tison et al., 2008].
 Mean monthly Ichl-a shows distinct increases in January, February and September (Figure 2a) and is consistent with seasonal changes in air temperature and PAR (Figures 2b and 2c). The pattern in monthly-binned data is less robust than the seasonal means because some months are poorly sampled. The increase from August to September, computed from 178 and 264 cores, respectively, is considered robust. The September increase corresponds to the onset of increase in PAR to >100 μmol quanta m−2 s−1 (Figure 2c) over the seasonally changing Antarctic sea ice zone (Figure 2d). This increase in PAR releases light limitation for ice algae, and results in a rapid biomass accumulation. The increase from December (57 cores) to January (42 cores) and February (31 cores) is based on only 130 cores and must be interpreted with caution. Decreasing temperatures in February induce vertical instability in sea ice brines, promoting nutrient re-supply due to increased exchange of brine and under-ice sea water, resulting in an ice algal autumn bloom [Fritsen et al., 1994; Vancoppenolle et al., 2010; Saenz and Arrigo, 2012]. The generally low but biologically significant Ichl-avalues in cores sampled between May and August are arguably the result of preservation of remnant ice algal chl-a and scavenged phytoplankton incorporated into the sea ice during its formation [Garrison et al., 1983], in situ growth [Melnikov, 1998] as well as an increase in cell-specific chl-a content due to low-light adaptation of ice algae in winter.
3.3. The Vertical Distribution of Sea Ice Chl-a (Cchl-a)
 Mean Cchl-a is 0.94 ± 7.29 mg m−3 (range 0–404.9 mg m−3). More than half (56.3%) of all ice cores show biomass maxima in the bottom third, followed by 29.2% with a biomass maximum in the surface, and 16.3% in internal layers (Table 2). The bottom, internal and surface sections represent 39.4%, 31.4% and 29.3% of Ichl-a, respectively, demonstrating that on a circum-Antarctic scale, the vertical distribution of ice algal biomass is relatively even. The dataset does not show any reliable or notable seasonal evolution of the vertical distribution of ice algal biomass. Regional comparison of vertical biomass distributions shows that ice cores from the Pacific, Ross and Amundsen/Bellingshausen sectors have a relatively high contribution to Ichl-a in the surface. In contrast, bottom communities dominate Ichl-a in the West and East Weddell sectors, and in the poorly sampled Indian sector. Snow loading is considered to be a key driver for the development of surface and internal communities [e.g., Ackley et al., 2008], but unfortunately, the ASPeCt – Bio database provides insufficient snow measurements to directly test this hypothesis. However, estimates by Maksym and Markus suggest that the Amundsen/Bellingshausen and Pacific sectors feature the highest relative contribution of snow-ice, which is consistent with the highest ice algal biomass in the surface (Table 2). Regional differences in atmospheric conditions may be responsible for the regional differences in ice algal vertical distribution, via their influence on snow/ice thickness ratios that determine seawater and brine flooding at the ice surface and irradiance in the ice interior and bottom layers. Atmospheric forcing may also result in differences in the relative contribution of frazil versus congelation ice types, which might affect the vertical distribution of algae, e.g. by enhanced incorporation of phytoplankton into frazil ice layers during ice formation [Garrison et al., 1983; Arrigo et al., 2010].
 The probability of the occurrence of a chl-a maximum in relation to ice thickness is shown inFigure 3a. The total number of cores in each core length bin is shown in Figure 3b. The analysis indicates that (i) thin, level ice (<0.4 m) is prone to both bottom and surface communities, (ii) thicker, level ice (0.4–1 m) is most likely to harbor bottom communities, and (iii) thick, deformed ice has more evenly distributed biomass. The probability of finding surface communities decreases monotonically with ice thickness. The high likelihood for a bottom chl-a maximum in the 0.4–1.0 m core length class is robust, as this ice core length class is the most representative, both in the ASPeCt – Bio database and in the physical ASPeCt climatology [Worby et al., 2008]. This high prevalence is a result of favorable environmental conditions in the bottom horizons of this ice thickness class including high nutrient availability due to exchange with the under-ice water column, sufficient irradiance availability, and insulation against synoptic scale variations in air temperatures. The more evenly distributed maximum chl-a concentration in thicker sea ice (>1.0 m) is attributed to the fact that high thicknesses strongly imply a dynamic growth history. Rafting or ridging events randomly redistribute previously formed bottom and surface communities throughout the ice. However, it is noted that the number of ASPeCt – Bio ice cores >2 m in thickness is relatively low (Figure 3b).
 This analysis is the first attempt to quantify the relationship between ice thickness and the shape of Antarctic ice algal biomass profiles. Our results show that sea ice bottom biomass is not distributed evenly across ice thickness classes. In particular, 0.4–1 m thick sea ice, representing the mean Antarctic ice thickness, harbors bottom ice algal communities that provide a readily accessible food source for pelagic herbivores. Antarctic krill feed on sea ice bottom communities [e.g., Daly, 1990] and for some areas in the Antarctic, a positive relationship between winter sea-ice extent and krill abundance has been established [Atkinson et al., 2004]. Climate models predict, on average, that Antarctic sea ice will decrease by 24% in extent and 34% in volume by the end of this century [Arzel et al., 2006]. Our study suggests that the winter-spring ice thickness distribution is a key factor that will affect the vertical distribution of ice algae at the time krill need food for survival, reproduction and growth.
 This study provides the first observational seasonal cycle of ice algal biomass across the entire Antarctic sea ice zone. Within the limitations of the data, these provide an important baseline that is consistent with more spatially and temporally confined time-series and modeling studies. Our data suggest peaks in integrated biomass in early spring and late summer, which highlights the importance of light and nutrient availability for seasonal ice algal accumulation.
 Our study provides the first analysis of Antarctic sea ice chl-a profile shape and its dependence on ice thickness, and emphasizes the relatively equal contribution of surface, internal and bottom layers to biomass. The internal biomass maxima are found to be the least frequent in the ASPeCt – Bio data, but their contribution to Ichl-ais nearly equal to those of bottom and surface communities. This suggests that these assemblages, more commonly found in under-sampled thick, deformed ice, might contribute more than previously suspected to overall chl-a biomass. Future studies need to sample complete ice core profiles in thicker ice regimes in order to improve integrated biomass estimates. In order to better understand the role that snow loading plays in ice algal distribution, companion snow depth measurements are greatly needed. Sea ice algae models need to be multi-layered to accurately estimate ice algal primary production in Southern Ocean sea ice [e.g.,Saenz and Arrigo, 2012]. Our study suggests that predicted changes in sea ice thickness distribution may strongly affect the vertical distribution of biomass in sea ice, with potential consequences for pelagic food webs. The sea ice scientific community is encouraged to provide further data to the ASPeCt – Bio database, which is publicly available through the Australian Antarctic Data Centre.
 We thank the ship captains, crews and our colleagues from many different countries that supported the sea ice sampling activities during the various field programs that contributed to this study. This work was carried out under the auspices of the Scientific Committee on Antarctic Research – ASPeCt program, and also contributes to the Scientific Committee on Ocean Research working group on Biogeochemical Exchange Processes at the Sea-Ice Interfaces. This work was supported by the Australian Governments Cooperative Research Centres Program through the Antarctic Climate and Ecosystems Cooperative Research Centre. Interpretations and conclusions are those of the authors and do not imply the endorsement of the National Science Foundation. We thank the reviewers for their constructive comments on an earlier draft of this paper.
 The Editor thanks two anonymous reviewers for their assistance in evaluating this paper.