1. The hypothesis is tested that functional limitations, possibly related to the risk of disruptive xylem embolism, maintain the leaf water potential of trees within a safety range. This strategy would particularly apply to conifers.
2. It is also hypothesized that homeostasis in water transport is achieved by a combination of short-term stomatal regulation and the optimal allocation of resources between transpiring foliage, conductive sapwood and absorbing roots.
3. The implications of this hypothesis for responses of plant structure to the environment are explored from a theoretical viewpoint, focusing in particular on the effects of temperature, vapour pressure deficit and soil water availability and texture.
4. A comparison with published data sets confirms model predictions of greater allocation to transpiring foliage with increasing temperature, and lower allocation with increasing vapour pressure deficit and soil drought. Allocation to fine roots would respond more strongly to drought, and the effect would be magnified by coarse soil textures.
5. The applicability of the model to other taxa remains to be determined, and the extent to which the observed structural adjustment is the result of phenotypic plasticity or long-term adaptation is still unclear.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.
Significant progress has been made in understanding how gas exchange and gross primary production of trees are affected by a variety of factors. In comparison, the allocation of growth among tree organs is poorly understood; a general lack of basic knowledge on complex topics such as phloem loading, transport and unloading (Patrick 1997; Van Bel 1993) prevents the translation of knowledge into simple operational models.
Many studies on the environmental control of allocation in trees have focused on the final effect of the process – the resulting changes in allometric balance among tree parts (Cannell & Dewar 1994; Gower, Isebrands & Sheriff 1995). Plant structure is affected by a variety of environmental factors. Temperature, for example, alters the balance between foliage and fine roots (Wilson 1988); fine root production is also enhanced by high light and nutrient deprivation, such that the functional balance between carbon and nutrient acquisition is maintained and tissue nutrient concentration is kept near constant (Dewar, Ludlow & Dougherty 1994; Santantonio 1990). The same homeostatic principle could drive the response of root–shoot ratios to soil drought (Cannell & Dewar 1994), which often increases resource allocation to absorbing roots (Gower et al. 1995). A homeostasis in water transport underlies the models of Whitehead et al. (1984) and Givnish (1986). Whitehead et al. (1984) argued that a balance exists between the area of transpiring foliage, sapwood conducting area, tree height and humidity of soil and in the air. Givnish (1986) also predicted that growth will be maximized when the balance between foliage and conducting roots is tuned to the atmospheric environment, because of the detrimental effects of extreme water potentials on leaf gas exchange. However, both hypotheses focused on only one component of the plant hydraulic continuum, the sapwood or fine roots.
Recently we have combined these two approaches in a mathematical model of resource allocation and growth in coniferous trees (Magnani, Mencuccini & Grace 2000). The analysis is based on the hypothesis of optimal growth and homeostasis in water transport: the assumption is made that minimum water potentials are constrained, possibly by the risk of destructive xylem embolism (Tyree & Sperry 1988), and that foliage production and tree growth are maximized within the limits imposed by this constraint. Using this approach, model predictions of plant structure and its changes over the lifetime of the tree have been compared with available experimental evidence for Pinus sylvestris in natural conditions (Magnani et al. 2000). The present paper explores the implications of this hypothesis for the response of tree structure and growth to the environment.
Theory and methods
Optimal tree structure under hydraulic constraints
The link between plant design and tissue water relations can be explored by means of a simple model. All parameters and variables are defined in Table 1. Let Ef be the transpiration rate of a unit of leaf surface in the stand. If Ψleaf is the resulting leaf water potential, and (for simplicity) neglecting the effects of tree height on gravitational potential, we can then define the hydraulic resistance per unit foliage area across the soil–plant continuum (Rftot) as:
Table 1. Variables, parameters and units used in the model
Sapwood area (on a ground area basis)
Vapour pressure deficit
Empirical coefficient for response to D
Transpiration per unit foliage area
m3 m−2 s−1
Reduction factor (subscript: D, for vapour pressure deficit; Ψ, for soil water potential)
Stomatal conductance (superscript: max, maximum)
Tissue longevity (subscript: r, fine root; s, sapwood)
Fine root density
Fine root radius
Root resistivity per unit fine root biomass
MPa s kg m−3
MPa s m−2
Soil resistivity (superscript: sat, saturated)
MPa s m−2
Soil resistivity per unit fine root biomass
MPa s kg m−3
Hydraulic resistance (superscript: f, per unit projected leaf area; g, per unit ground area; subscript: root, shoot, soil, total)
MPa s m−1
Stand biomass (subscript: f, foliage; r, fine roots; s, sapwood)
Viscosity of water
Density (subscript: s, sapwood; r, root)
Specific leaf area
Water potential (subscript: e, entry, leaf, foliage, soil)
Ψ at complete stomatal closure
Critical leaf water potential
where Ψsoil is soil water potential. Leaf-specific resistance can be scaled to the stand level as:
where Wf is stand foliage biomass, σ is specific leaf area and Rgtot is stand hydraulic resistance on a ground area basis, which can be viewed as the sum in a series of three distinct components located in the shoot, fine roots and soil, respectively.
Shoot hydraulic resistance (Rgshoot) is affected by the length of the hydraulic pathway, related to tree height h, and by the cross-sectional area As of conducting sapwood, again expressed on a ground area basis (Whitehead et al. 1984):
where rs is sapwood resistivity and Ws and ρs are sapwood biomass and density, respectively. According to the pipe model theory (Shinozaki et al. 1964), a constant sapwood cross-sectional area has been assumed in equation 2 throughout the plant, once axes of the same branching order are summed together.
Root hydraulic resistance (Rgroot) is mainly associated with the movement of water from the epidermis to the stele (Passioura 1988); it is therefore inversely related to the surface of fine roots and, approximately, to fine root biomass Wr:
where rr is resistivity per unit root biomass.
Soil hydraulic resistance (Rgsoil) is also influenced by the biomass of fine roots exploring the soil. From single root theory, Rgsoil can be approximated as (Passioura & Cowan 1968):
where r is root radius, L is fine root density in the soil, z is rooting depth and rsoil is soil hydraulic resistivity. Rooting depth is assumed to increase with fine root biomass, implying a constant fine root density throughout the soil. Soil resistivity per unit root biomass (rrsoil) is therefore defined as:
where ρr is the basal density of fine roots and is assumed to be equal to sapwood density.
Soil hydraulic resistivity is a direct function of soil water potential and can be expressed as (Campbell 1985):
where the resistivity of saturated soil (rsatsoil), soil entry potential (Ψe) and the empirical coefficient b are all functions of soil texture. Tabulated values of soil hydraulic parameters for key textural types, computed according to Campbell (1985) can be found in Sperry et al. (1998). Soil saturated resistivity is lower in coarse soils. At the same time, the coarser the soil, the steeper the increase in soil resistivity with decreasing water potentials.
Experimental evidence (reviewed for P. sylvestris in the Results section) suggests that under natural conditions, leaf water potential does not usually exceed a critical value , which could be dictated in coniferous species by the risk of diffuse xylem embolism and tissue dieback (Tyree & Sperry 1988). The maintenance of such a functional homeostasis imposes a tight constraint on plant structure, as it requires from equations 1–4 that hydraulic resistances conform to:
( eqn 7)
Equation 7 is fully equivalent to the model of Whitehead et al. (1984) when the role of roots is disregarded (when rr = rrsoil = 0) and to the model presented by Givnish (1986) when, in contrast, stem hydraulic resistance is neglected (when rs = 0).
The functional requirements of equation 7 could not be met unless new foliage growth was always supported by an adequate quantity of sapwood and fine roots. Moreover, the reduction in hydraulic resistance needed to sustain new foliage will be achieved at minimum cost, in order to reserve as many resources as possible for foliage growth and so maximize plant height increments and, ultimately, tree survival and fitness. In particular, optimal growth under hydraulic constraints requires that the ratio of marginal hydraulic returns to marginal annual cost for carbon investment in either roots or sapwood, once discounted for tissue turnover, should be the same (Case & Fair 1989):
After rearranging, the balance between sapwood area and fine root biomass is predicted to be:
where the coefficient c is a function of tissue characteristics and soil hydraulic resistivity:
The balance between sapwood area and fine root biomass will therefore depend on soil textural characteristics, and will in general shift towards larger root biomass under dry conditions.
When combined with the general requirement of functional homeostasis of equation 7, equation 10 translates into hydraulic constraints, representing the optimal balance between transpiring foliage and conductive tissues under given environmental conditions:
The allometric balance between Wf and As, Wr can be seen to depend on tree height, less carbon being allocated to foliage as the stand ages, as discussed in detail by Magnani et al. (2000) who give a more detailed description of the mathematical development of equations 9–13.
The basic constraints captured by equations 10–13 are not altered qualitatively by including the effects of height and gravitational potential, which are equivalent to a change in critical water potential, in equation 7.
Functional and structural response to key environmental parameters
The effects of temperature, air humidity and soil water potential on plant function and structural design are considered here. Low temperatures dramatically increase the hydraulic resistance of the soil–plant continuum (Cochard et al. 2000). In the case of sapwood resistance the effect is purely physical, and is determined by the response to temperature of water viscosity, η. The relationship can be represented as:
Root resistance responds even more dramatically to low temperatures, as a result of the reduced fluidity of plasma membranes that water has to cross at the level of the endodermis. This is demonstrated by a re-analysis of root hydraulic conductance (= 1/Rroot) data for a coniferous, two dicot and two monocot species (BassiriRad, Radin & Matsuda 1991; Fennell & Markhart 1998; Markhart et al. 1979; Smit-Spinks, Swanson & Markhart 1984; Fig. 2). The foliage : fine root biomass ratio is expected in the model to follow the same relationship. Moreover, in order to compensate their greater sensitivity to cold conditions, fine roots are expected to be favoured against sapwood area at low temperatures (equation 10).
The expected impact on plant structure of air humidity and soil water depends upon the response of transpiration to the plant’s environment. Leaf transpiration can be approximated in conifers by imposed transpiration, the product of stomatal conductance (gs) by air vapour pressure deficit (Whitehead et al. 1984). Air and soil humidity limitations reduce stomatal conductance below its maximum value gsmax:
where the modifiers fD and fΨ range in value between 0 and 1, and represent the effects of air vapour pressure deficit and soil water potential, respectively. According to Lohammar et al. (1980), the reduction induced by air vapour pressure deficit can be expressed as:
where D is air vapour pressure deficit and D0 is the value inducing a 50% stomatal closure. The response to soil water potential can be approximated by a simple linear function (Jones 1992):
where Ψ0 represents the soil water potential corresponding to complete stomatal closure. Therefore, leaf transpiration can be represented as:
From equation 7, the hydraulic resistance per unit foliage area that can be safely maintained will decrease asymptotically as D increases, mirroring the response of transpiration captured by equation 19. This constraint will cause a parallel decline in the biomass of foliage supported by unit sapwood area (Fig. 1b):
From equation 10, the balance between foliage and absorbing roots is expected to respond in a similar way to T and D.
In response to soil drought, stomatal closure effectively prevents the onset of extreme leaf water potentials, despite the marked increase in soil–plant hydraulic resistance that is often reported (Breda et al. 1993; Irvine et al. 1998). From equations 7 and 19, the maximum resistance that can be withstood by the plant under hydraulic constraints can be expressed as:
If is more negative than Ψ0, stomata will shut completely and Rftot will therefore increase in dry soil without triggering substantial xylem cavitation (Fig. 3a), in good agreement with experimental evidence (Irvine et al. 1998). However, because of the parallel increase in soil hydraulic resistivity (equation 6; Fig. 3a), plant resistance per unit foliage area must be reduced if the hydraulic constraints are to be met. This will shift resources from foliage to conductive tissues under dry conditions, which will be more marked in coarse soils (Fig. 3b,c). Because of the parallel changes in the balance between sapwood and fine roots (equation 10), drought will increase allocation to fine roots (Fig. 3b), as often reported under field conditions.
Test of the model
The relationship between plant structure and environmental factors has been tested by comparison with published data sets. The effects of air vapour pressure deficit have been analysed in detail by DeLucia et al. (2000), and their results have been complemented by the meta-analysis of available information for P. sylvestris by Mencuccini & Bonosi (2001). The effects of temperature on the structure of pine species have been analysed by Palmroth et al. (1999), Cregg (1994) and Bongarten & Teskey (1987). The model has been fitted by nonlinear regression techniques (NLIN procedure, sas 8·2, SAS Institute Inc., Cary, NC) on each data set, focusing on individual parameters in isolation.
Results and discussion
The hypothesis of homeostasis in plant water relations
A review of 11 published data sets for P. sylvestris (Magnani 2000), encompassing a large range of conditions and including both seedlings and mature trees, confirms that minimum leaf water potential is maintained largely constant despite large ontogenetic and environmental differences ( = −1·4 ± 0·2 MPa, n = 16), as assumed in equation 7. This contrasts with the more than threefold variation observed in Rftot in the same data set, between 1·6 and 4·9 × 107 MPa s m−1.
Tyree & Sperry (1988) suggested that minimum leaf water potentials under field conditions closely match the critical threshold for xylem cavitation. A meta-analysis of six data sets of xylem vulnerability in P. sylvestris is consistent with this view (Magnani 2000), suggesting a mean water potential threshold of −1·54 MPa, although the scatter in the results is large (SD = 0·3 MPa).
Cavitation avoidance is associated with a general lack of drought-induced leaf shedding in conifers. In the artificial drought experiment described by Irvine et al. (1998), needle loss was almost identical in droughted and control trees (unpublished results), as also reported for P. halepensis by Borghetti et al. (1998).
With the caveats discussed, the hypothesis that P. sylvestris (and possibly other coniferous species) has evolved a strategy of functional homeostasis and cavitation avoidance is supported by the experimental evidence.
Response of plant structure to temperature
The amount of foliage that can be supported by unit sapwood area (Wf/As) is predicted to increase in warm climates (Fig. 1a). Model predictions agree with the results of Palmroth et al. (1999), who analysed changes in the structure of P. sylvestris across Europe (Fig. 4; R2 = 0·52, P < 0·001). The effects of temperature on the ratio between foliage and fine roots in Pinus ponderosa (Cregg 1994) and Pinus taeda seedlings (Bongarten & Teskey 1987) were also found to mirror closely reported changes in root hydraulic conductance (Fig. 5; R2 = 0·62, P < 0·001), as predicted by the model. Observed differences within species seem to originate from long-term adaptation to local conditions, as average temperatures at the site of origin were considered. The same is true for the balance between foliage and sapwood area, as demonstrated by a comparison with results from a common garden experiment (Palmroth et al. 1999; Fig. 4).
Experimental studies on herbaceous species have consistently reported higher foliage : fine root ratios under warm conditions (Markhart et al. 1980; Wilson 1988). This has been suggested to result from a functional balance between foliage assimilation and root nutrient uptake (Cannell & Dewar 1994), assuming a higher sensitivity of root processes to temperature. However, the effect is also observed when only shoot temperature is increased (Wilson 1988). This result is at odds with the hypothesis of root–shoot functional balance, as such a treatment would enhance leaf photosynthesis but not root function, but is well explained by our model of optimal growth under hydraulic constraints. Warmer temperatures applied either to roots or shoot will reduce their hydraulic resistance. The effect will extend beyond the compartment being manipulated because of the effects on parameter c (equation 11), in agreement with experimental results.
Response of plant structure to air humidity
Foliage : sapwood area ratios are predicted to decline in dry air (equation 20; Fig. 1b). Parallel changes are predicted for the ratio between foliage and fine roots. This agrees with the experimental results for three pine species presented in Fig. 6 (R2 = 0·87, P < 0·001). In all three species, leaf area : sapwood area ratios decline asymptotically with increasing D, although P. sylvestris shows a much more gentle response. Data for conifers other than pines show no clear evidence of an adjustment to air humidity (DeLucia et al. 2000). The response of pines could explain their abundance in warmer, drier habitats (Richardson 1998).
According to DeLucia et al. (2000), common garden experiments with P. ponderosa seedlings point to a purely phenotypic rather than a genotypic effect in the structural adjustment to air humidity and transpiration rates, confirming previous findings by Mencuccini & Grace (1995). Strong phenotypic plasticity is assumed to be typical of colonizing species such as pines (Sultan 2000).
Few other experimental studies have explicitly considered the effects of air humidity on plant structure. Smaller leaf specific conductances were observed by Bunce & Ziska (1998) in Glycine max and Medicago sativa plants grown under high vapour pressure deficits. As predicted by our model, this structural change was enough to offset the effects of humidity on transpiration rates, so that leaf water potential was not affected by the treatment. Darlington et al. (1997) observed a lower allocation to roots in Picea mariana and Pinus banksiana seedlings grown under high vapour pressure deficit.
Response of plant structure to soil water availability
According to model predictions, water availability would change the ratio between foliage and conductive sapwood, with a shift away from foliage production under dry conditions (Fig. 3c). Even more important would be the effect on the functional balance between transpiring foliage and absorbing roots, which is predicted to decline in a sandy loam by as much as 75% as soil water potential decreases from saturation to −0·5 MPa (Fig. 3b). According to the model, however, the effects of water availability on tree structure would largely depend on soil texture, with stronger reductions in sandy soils (Fig. 3b,c).
The proposed hypothesis of homeostasis for water transport in conifers appears to be supported by a large body of experimental evidence. Constancy in minimum leaf water potential is confirmed by experimental results under a wide range of conditions. The implications of the hypothesis also help to explain commonly observed changes in tree structure as a function of the environment. Although homeostasis in the face of sudden perturbations can be achieved only through stomatal regulation, structural changes appear to play a central role in the adjustment to prevailing environmental conditions over periods of months to years.
Our model is based on the simple and widely known observation of a regularity in plant function. Once implemented into a mathematical model, however, its heuristic value becomes apparent, as it could provide a physiologically based representation of resource allocation and plant structure in response to the environment and climate change (Friedlingstein et al. 1999).
Two questions remain unanswered. First, the limits of applicability of the model need to be determined. While some of the predictions of the model have general validity from herbs to trees, others would apply only to conifers, or are even limited to the genus Pinus. Second, it remains to be seen if, and to what extent, structural adjustments result from phenotypic plasticity or genetic adaptation under the long-term pressure of natural selection. The plant’s potential to acclimate is an important evolutionary feature, enabling long-lived, sessile trees to tolerate the vagaries of the environment, but plasticity comes at a cost and could be limited despite its clear benefits (DeWitt, Sih & Wilson 1998). Whether or not individual trees have the potential to acclimate over a single generation to a variable environment has implications for the future response of forest ecosystems to climate change.
Research supported by grants from the European Union Projects LTEEF-II (ENV4-CT97-0577) and Carbo-Age (EVK2-1999-00305) and from the Italian MURST Cofin98 (Impact of climate change on forests and wood production) and Cofin99 (Productivity and water use in forest ecosystems). We gratefully thank Dr M. Mencuccini for kindly providing a draft of his paper.