Notice: Wiley Online Library will be unavailable on Saturday 30th July 2016 from 08:00-11:00 BST / 03:00-06:00 EST / 15:00-18:00 SGT for essential maintenance. Apologies for the inconvenience.
Note: As the binding capabilities of insulin and the 4-kDa peptide to the 43 kDa protein were similar, Watanabe et al. named the 4-kDa peptide as leginsulin in their early publication. There are many controversies related to the naming of this peptide as leginsulin. To avoid confusion, in the present article we referred to the peptide as ‘4-kDa peptide’ instead of leginsulin.
H. Hirano, Yokohama City University, Kihara Institute for Biological Research/Graduate School of Integrated Science, Maioka-cho 641-12, Totsuka, Yokohama, 244-8013 Japan. Fax: + 81 45 820 1901; Tel.: + 81 45 820 1904; E-mail: firstname.lastname@example.org
Soybean 4-kDa peptide, a hormone-like peptide, is a ligand for the 43-kDa protein in legumes that functions as a protein kinase and controls cell proliferation and differentiation. As this peptide stimulates protein kinase activity, the interaction between the 4-kDa peptide (leginsulin) and the 43-kDa protein is considered important for signal transduction. However, the mechanism of interaction between the 4-kDa peptide and the 43-kDa protein is not clearly understood. We therefore investigated the binding mechanism between the 4-kDa peptide and the 43-kDa protein, by using gel-filtration chromatography and dot-blot immunoanalysis, and found that the 4-kDa peptide bound to the dimer form of the 43-kDa protein. Surface plasmon resonance analysis was then used to explore the interaction between the 4-kDa peptide and the 43-kDa protein. To identify the residues of the 4-kDa peptide involved in the interaction with the 43-kDa protein, alanine-scanning mutagenesis of the 4-kDa peptide was performed. The 4-kDa peptide-expression system in Escherichia coli, which has the ability to install disulfide bonds into the target protein in the cytoplasm, was employed to produce the 4-kDa peptide and its variants. Using mass spectrometry, the expressed peptides were confirmed as the oxidized forms of the native peptide. Surface plasmon resonance analysis showed that the C-terminal hydrophobic area of the 4-kDa peptide plays an important role in binding to the 43-kDa protein.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.
A 43-kDa protein in legume seeds has been shown to bind to animal insulin . This 43-kDa protein consists of α (27 kDa) and β (16 kDa) subunits linked together with disulfide bridge(s). The α-subunit has a cysteine-rich region considered to be the interface for the interaction with its ligand, and the β-subunit has protein kinase activity about two-thirds that of the tyrosine kinase activity of rat insulin receptor. Although proteins homologous to the 43-kDa protein exist in different plant species [2–5], the biological function of these proteins has not been completely clarified. However, the 43-kDa protein from cotton has weak antifungal activity against Alternaria brassicicola and Botrytis cinerea. As the 43-kDa protein is localized in plasma membranes and cell walls , the 43-kDa protein is thought to have receptor-like function.
This function, as a receptor-like protein, has allowed us to assume the presence of a physiologically active ligand which is capable of binding to the 43-kDa protein. A 4-kDa peptide was isolated from germinating soybean seed radicles by affinity chromatography on a 43-kDa protein-immobilized column. The 4-kDa peptide is able to stimulate protein kinase activity of the 43-kDa protein . The maximum stimulatory effect was observed at a low concentration (1 nm) of the 4-kDa peptide, suggesting that it is involved in signal transduction of the 43-kDa protein . The 4-kDa peptide is localized, in small amounts, around the plasma membranes and cell walls . This subcellular localization is similar to that of the 43-kDa protein, suggesting that the 4-kDa peptide is located at a site suitable for interaction with the 43-kDa protein.
In a previous study we provided some evidence to show that the 4-kDa peptide is physiologically active. The 4-kDa peptide was found to stimulate cell proliferation and cell redifferentiation when added to the culture medium of carrot callus tissue . Furthermore, when cDNA from the 4-kDa peptide was introduced into the carrot callus, the transgenic callus grew rapidly compared with the non-transgenic callus during the early stages of development . These results suggest that this peptide is involved in the signal transduction mediated by the 43-kDa protein in carrot . However, the molecular mechanism of the interaction between the 4-kDa peptide and 43-kDa protein is unknown. In previous work, we determined the tertiary structure of the 4-kDa peptide by NMR spectroscopy and found that this peptide belongs to the T-knot superfamily . The structure of the 4-kDa peptide is similar to those of many growth factors in animals, protease inhibitors and antimicrobial peptides in plants, and toxins in insects . As the function of these molecules is to bind to their target proteins to regulate or inhibit their activities, it is assumed that the function of the 4-kDa peptide also relates to the regulation of the43-kDa protein kinase activity.
In this work, we performed gel-filtration chromatography to study the interaction between the 4-kDa peptide and the 43-kDa protein. We also investigated the binding mechanism of the 4-kDa peptide, by alanine-scanning mutagenesis. The results indicate that the hydrophobic region of this peptide is important for binding to the 43-kDa protein. We also describe the topological similarity of active residues between the 4-kDa peptide and animal insulin.
Materials and methods
All oligonucleotides were obtained from Invitrogen Life Technologies. The expression vector for Escherichia coli, pET-32a[+], the expression host cell, BL21trxB (DE3), and the BugBuster protein extraction reagent were obtained from Novagen (Madison, WI, USA). A nickel-chelating affinity chromatography column, HiTrap chelating HP (1 mL), and the gel-filtration chromatography column for the SMART system, Superose 12 PC3.2/30, were obtained from Amersham Bioscience (Uppsala, Sweden). The size-standard proteins kit for gel-filtration chromatography was purchased from Bio-Rad Laboratories (Hercules, CA, USA). Biacore sensor chip CM5, was obtained from Biacore (Uppsala, Sweden). The restriction enzymes, EcoRI and NcoI, were from Nippon Gene (Tokyo, Japan). All other inorganic and organic compounds were purchased from WAKO Chemicals (Osaka, Japan).
Gel-filtration chromatography was performed using the SMART system in PC3.2/30 columns containing Superose 12 resin in 100 mm sodium phosphate/0.5 m NaCl, pH 7.6. The samples were eluted using the same buffer. Eighty microlitres of fraction was collected in each tube subsequently, after discarding the exclusion volume. All gel filtrations were carried out at room temperature. For gel filtration using the Superose 12 resin, two sample solutions were prepared. The first was the gel-filtration elution buffer containing the 43-kDa protein incubated for 30 min at room temperature; and the second was the gel-filtration elution buffer containing a mixture of the 4-kDa peptide and the 43-kDa protein [molecular concentration ratio: 2 : 1 (43-kDa protein : 4-kDa peptide)] incubated for 30 min at room temperature.
The eluted fractions of the gel filtration were spotted onto a poly(vinylidene difluoride) (PVDF) membrane (10 µL per spot). The membrane was blocked with 1% nonfat dry milk in NaCl/Tris buffer (20 mm Tris/HCl, pH 7.4, containing 0.5 m NaCl) for 1 h at room temperature. Polyclonal rabbit anti-(4-kDa peptide) was dissolved in NaCl/Tris and incubated with the membrane overnight at 4 °C. The membrane was washed twice (10 min each wash) in NaCl/Tris buffer at room temperature and incubated with goat anti-(rabbit IgG) labeled with alkaline phosphatase. The signal was detected with BCIP/NBT membrane phosphatase substrate (KPL, Gaithersburg, MD, USA).
Construction of the bacterial expression vector and site-directed mutagenesis
The DNA sequence of the wild-type 4-kDa peptide was amplified from the soybean 4-kDa peptide cDNA by PCR using the following oligonucleotide primers: N-terminal primer: 5′-AAC CAT GGC TAA AGC AGA TTG TAA TGG TGC ATG T-3′; C-terminal primer: 5′-AAG AAT TCT TAT TAT CCA GTT GGA TGT ATG CAG AA-3′. The amplified sequence was cloned into plasmid pET-32a(+), via the NcoI and EcoRI restriction sites, into a multicloning site located downstream of the S-Tag sequence. This plasmid was termed pTrx-LEG. The validity of the 4-kDa peptide DNA sequence was verified by dideoxy sequencing. Site-directed mutagenesis was performed, using pTrx-LEG as a template, according to the methods of Higuchi et al.  and Ho et al. . All residues of the 4-kDa peptide, with the exception of alanines, cysteines, glycines and prolines, were singly replaced by alanine. The resulting constructs were verified by DNA sequencing. All of the mutational 4-kDa peptide DNA sequences were recloned into the same restriction site of the wild-type 4-kDa peptide DNA sequence.
Expression and purification of the 4-kDa peptide variants
E. coli BL21trxB(DE3) [F–ompT hsdSB (rB–mB–) gal dcm trxB15::kan (DE3)], transformed with pTrx-LEG or the corresponding variants, was grown at 37 °C in 1 L of Luria–Bertani (LB) medium, containing 50 µg/mL carbenicillin, until a D600 value of 0.6 was reached. After addition of isopropyl thio-β-d-galactoside (IPTG) to a final concentration of 1.0 mm, cells were grown for a further 4 h and harvested by centrifugation at 6000 g for 10 min at 4 °C. The cells were suspended in 40 mL of BugBuster protein-extraction reagent. The cell suspension was incubated on an orbital shaker, at a slow setting, for 10 min at room temperature. In the soluble fraction, cell debris was removed by centrifugation at 48 000 g for 15 min at 4 °C. The supernatant was used as a crude extract. The Trx-tagged 4-kDa peptide, or its variants in the crude extract, were purified according to immobilized metal affinity chromatography. The crude extract was applied to HiTrap chelating HP that immobilized Ni2+ equilibrated with 20 mm sodium phosphate buffer (pH 7.4) containing 0.5 m NaCl. The target protein was eluted with a 10–500 mm linear gradient of imidazole in 20 mm sodium phosphate buffer (pH 7.4) containing 0.5 m NaCl. The fractions containing the target protein were combined.
Peptide mass fingerprinting
The Trx-tagged 4-kDa peptide, or its variants, were digested with lysylendopeptidase (WAKO Chemicals). The digests were desalted with ZipTipµ-C18 (Millipore, Boston, MA, USA) and subjected to analysis by MALDI-TOF MS (Tofspec 2E; Micromass, Manchester, UK). In MALDI-TOF MS, ionization was accomplished with a 337-nm pulsed nitrogen laser. Spectra were acquired in reflectron using a 20-kV acceleration voltage. Samples were prepared by mixing equal volumes of a 1–10 µm solution of the digests and a saturated solution of α-cyano-4-hydroxycinnamic acid as a matrix in 50% CH3CN with 0.1% trifluoroacetic acid. Four microlitres of this mixture was spotted onto the sample plate and allowed to desiccate to dryness. The masslynx software (Micromass) was used to analyze the spectra.
To confirm the mechanism of complex formation between the 4-kDa peptide and the 43 kDa-protein, we employed surface plasmon resonance (SPR) analysis using Biacore X (Biacore). The purified wild-type 4-kDa peptide was immobilized onto sensorchip CM5 according to the supplier's instructions. Different amounts of 43-kDa protein, dissolved in running buffer (20 mm sodium phosphate, pH 7.4, containing 0.5 m NaCl), were injected as analytes for binding analysis at 25 °C using a flow rate of 20 µL·min−1.
The binding affinities of the Trx-tagged wild-type 4-kDa peptide and its variants were determined using Biacore X, to measure the association rate constant (ka) and the dissociation rate constant (kd). The 43-kDa protein was immobilized onto sensorchip CM5, according to the supplier's instructions, to yield approximately 5560 response units of covalently coupled protein. Kinetic analysis was carried out by injecting three serial dilutions (400 nm, 800 nm and 1.6 µm) of Trx-tagged 4-kDa peptide or variants in running buffer (20 mm sodium phosphate, pH 7.4, containing 0.5 m NaCl) at 25 °C using a flow rate of 20 µL·min−1.
Fitting sensorgram data was carried out according to global fitting, and the ka and kd values were calculated with a 1 : 1 Langmuir model using the biaevaluation software, version 3.2 RC2 (Biacore). The dissociation constant (KD) was calculated as KD = kd/ka.
Results and discussion
Identification of a complex of 4-kDa peptide and 43-kDa protein
We first sought to determine the potential association of the 43-kDa protein, as the receptor of the physiologically active peptide usually forms an oligomer to activate the function of the receptor . When the 43-kDa protein was subjected to gel-filtration chromatography, we observed only one peak for a complex of 80-kDa, suggesting that the 43-kDa protein is present as a dimer (Fig. 1A). Subsequently, we applied the solution containing the 43-kDa protein and 4-kDa peptide to the gel filtration column, and observed a peak with almost the same retention time as that of the 80-kDa complex. We studied proteins containing these fractions by dot-blot analysis using anti-(4-kDa peptide). The result revealed that both the 4-kDa peptide and 43 kDa protein were present in the same fractions, suggesting that the 4-kDa peptide interacts with the dimer of 43-kDa protein.
To determine the Kd of the 4-kDa peptide and 43-kDa protein, the wild-type 4-kDa peptide was immobilized onto sensorchip CM5 by amine coupling. The 43-kDa protein solution was passed through the flow cells as an analyte. Interaction of ligand and analyte was detected in real time as a change in the SPR signal. The association and dissociation sensorgrams obtained are shown in Fig. 2. The Kd of the 4-kDa peptide for binding to the 43-kDa protein was calculated as 1.86 × 10−8m.
Interaction of Trx-tagged 4-kDa peptide with the 43-kDa protein
The Trx-tagged 4-kDa peptide was expressed in a thioredoxin-reductase gene (TrxB) null mutant, BL21trxB(DE3), and purified according to immobilized metal affinity chromatography (Fig. 3). The binding activity of the 4-kDa peptide to the 43-kDa protein is dependent on the maintenance of its tertiary structure by three intramolecular disulfide bonds. The reduced 4-kDa peptide has significantly less activity than the oxidized form of the peptide . To introduce the intramolecular disulfide bonds in the expressed 4-kDa peptide, we used BL21trxB(DE3) host cell, TrxB null mutant and pET-32a[+] vector. Bessette et al.  described that this strain can form disulfide bonds more efficiently in the cytoplasm than in the oxidizing environment of the periplasmic space. Stewart et al.  showed that Trx, which serves as an oxidant instead of a reductant, mediates disulfide bond formation in the thioredoxin-reductase null mutant because the reduction system in the cytoplasm does not work. By peptide mass fingerprinting, we confirmed that the expressed 4-kDa peptide has three intramolecular disulfide bonds (Fig. 4, Table 1). This result indicates that we can construct various alanine substitution-variants crosslinked with disulfide bonds using this expression system.
Table 1. Identification of the oxdized form of 4-kDa peptide variants by MALDI-TOF MS. 3S–S denotes the formation of three intramolecular disulfide bonds.
Theoretical mass [M+H]+ (m/z)
Observed mass [M+H]+ (m/z)
The purified 43-kDa protein was immobilized onto sensorchip CM5 and confirmed to bind to the Trx-tagged 4-kDa peptide by SPR analysis. The Kd of the Trx-tagged 4-kDa peptide for the 43-kDa protein was determined as 8.56 × 10−8m(Fig. 5A, Table 2). It should be noted that the Kd value reported here is higher than that previously described for the wild-type 4-kDa peptide, probably because of changes in the source of the 4-kDa peptide (see the Materials and methods for further details). To investigate whether Trx-tag impedes binding of the 4-kDa peptide to the 43-kDa protein, Trx-tag expressed in E. coli transformed with pET-32a[+] was injected to the 43-kDa protein-coupling sensorchip. In this experiment, we did not observe any sensorgrams showing that Trx-tag bound to the 43-kDa protein (Fig. 5B). This result shows that the 4-kDa peptide and 43-kDa protein, but not Trx-tag, are involved in binding of the Trx-tagged 4-kDa peptide to the 43-kDa protein.
Table 2. Association rate constants (ka), dissociation rate constants (kd) and dissociation constants (KD) for binding alanine variants of Trx-tagged 4-kDa peptide to 43-kDa protein. Dissociation constants were calculated as follows: KD = kd/ka. Relative KD values were calculated as: Kdvariants/Kdwild type.
A. Charged to alanine variants
B. Aromatic to alanine variants
C. Polar to alanine variants
D. Fatty to alanine variants
The 4-kDa peptide in the expressed Trx-tagged 4-kDa peptide has three intramolecular disulfide bonds. As it had a binding activity similar to that of the wild-type 4-kDa peptide, we concluded that the intramolecular disulfide bonds were correctly formed in the Trx-tagged 4-kDa peptide.
Dissociation constants of the 4-kDa peptide variants
To investigate the residues of the 4-kDa peptide involved in binding to the 43-kDa protein, we generated 4-kDa peptide variants, in which 19 residues were substituted with alanine using pTrx-LEG as a template. To avoid potential structural perturbation, alanine, cysteine, glycine and proline residues were not substituted. All variants were generated as Trx-tagged proteins and purified according to the methods used for the wild-type 4-kDa peptide. The purity of the fused proteins was confirmed on a Coomassie blue-stained SDS/PAGE gel. All purified proteins were detected as major bands with the expected molecular weights (Fig. 3). The number of disulfide bonds in the variants was investigated by peptide mass fingerprinting, and all variants were found to have three disulfide bonds (Table 1). The Kd values for binding to the 43-kDa protein were investigated by SPR analysis, as employed for the wild-type 4-kDa peptide.
The results of our analyses of the 4-kDa peptide alanine variants are shown in Table 2 and Fig. 6. Figure 6 shows the ratio of the Kd value of the 4-kDa peptide variant to the Kd value of the wild-type 4-kDa peptide. Of the 19 alanine variants, 13 caused a significant impairment in binding of the 43-kDa protein, i.e. greater than a fourfold increase in the Kd value. Three of the 13 variants (Asp2, Asn4 and Ser8) are located in the N-terminus of the 4-kDa peptide and their Kd values for the 43-kDa protein increase from five- to 12-fold. Two variants, Val12 and Arg18, which showed a six- and 11-fold increase in Kd, respectively, are located in the loop between the first and the second strand in the 4-kDa peptide. His34 and Thr36 variants, located in the C-terminus of the 4-kDa peptide, result in a seven- and ninefold increase in Kd, respectively. The other variants (Ile25, Leu27, Phe28, Val29, Phe31, Ile33), whose residues constitute the hairpin-β motif, caused a remarkable decrease in affinity for the 43-kDa protein, ranging from fourfold (Leu27) to 116-fold (Val29). These variants were classified into several groups, and it was found that hydrophobic and aromatic residues contributed remarkably to the increase of Kd for the 43-kDa protein (Table 2); in particular, five residues (Ile25, Phe28, Val29, Phe31 and Ile33) play a critical role in binding to the 43-kDa protein.
Role of amino acids in the 4-kDa peptide
By alanine-scanning mutagenesis of the 4-kDa peptide, we identified that 13 amino acids play an important role in the interaction between this peptide and the 43-kDa protein. Eleven amino acids among the 13 mutants were organized into two discontinuous fragments (fragment 1 and fragment 2). Fragment 1 comprised the N-terminal region (Asp2–Ser8), while fragment 2 constituted the C-terminal region (Ile25–Thr36) (Fig. 6C). As the mutations of fragment 2 result in a higher increase in Kd than those of fragment 1, fragment 2 was considered to play a more important role in affinity for the 43-kDa protein. Of the 11 amino acids, one is charged, four are polar, four are hydrophobic and two are aromatic. The higher number obtained of aromatic and hydrophobic residues emphasized the importance of these amino acids in the interaction between the 4-kDa peptide and the 43-kDa protein. The secondary structures of these two fragments, as revealed from NMR spectroscopy of the 4-kDa peptide, indicate that fragment 1 contains the loop and β-strand, and fragment 2 contains hairpin-β. These structures form the sheet of the putative binding area (Fig. 7A,B). Of the two fragments, fragment 2 appears to be the most important in binding to the 43-kDa protein. Mutation of Val29 and Phe31 to alanine resulted in the 43-kDa protein with the lowest affinity, and substitution of Ile25 and Ile33 with alanine produced a 20-fold higher Kd than found in the wild-type protein (Table 2). Interestingly, all of the residues in fragment 2 were located at the same region, forming a hydrophobic patch (Figs 6 and 7A,B,C). The other residues, charged or polar, of fragment 2 surrounded this hydrophobic patch. The residues of fragment 1 were also found in the surrounding hydrophobic patch (Figs 6 and 7A,B,C). These topological alignments suggest that the hydrophobic residues, Val29 and Phe31, play a central role in binding to the 43-kDa protein and that the wall consisting of fragment 1 and part of fragment 2 contributes to binding of the 4-kDa peptide to the 43-kDa protein (Fig. 7A,B,C).
In Fig. 6C, we identified that two amino acids (Val12 and Arg18), in addition to the 11 residues described above, were involved in binding to the 43-kDa protein. The substitution of Val12 and Arg18 to alanine affected binding to the 43-kDa protein. Unexpectedly, the side-chains of these two residues were oriented in a different direction from those of fragment 1 and fragment 2, which indicates that Val12 and Arg18 do not belong to fragment 1 and fragment 2 and indicates that Val12 and Arg18 might play a different role from those residues of fragment 1 and fragment 2. Further analysis of the interaction between the 4-kDa peptide and 43-kDa protein is required.
Several reports suggest that the decreases in affinity observed in these types of mutations directly effect receptor–ligand interaction, rather than misfolding, of variant proteins . Alanine substitution is reported to be nondisruptive for globular protein structure . In the 4-kDa peptide, three intramolecular disulfide bonds are important for maintaining the tertiary structure. In the present study, peptide mass fingerprinting showed that, similarly to the wild-type 4-kDa peptide, all alanine variants possessed three disulfide bonds (Fig. 4, Table 1). Furthermore, all variants have a ka value which is similar to that of wild-type peptide, suggesting that substitution with alanine has no effect on the tertiary structure of the 4-kDa peptide (Table 2). Exceptionally, mutation of Phe28 to alanine caused a decrease in ka (Table 2), as it is located in the loop of the hairpin-β motif and this area is also exposed to the solvent. This suggests that the aromatic residue, Phe28, plays a vital role in maintaining the hairpin-β during interaction with solvent.
Interaction of insulin with the 43-kDa protein
Similarly to the 4-kDa peptide, insulin is able to interact with the 43-kDa protein . If the 4-kDa peptide and insulin share the same manner of binding to the 43-kDa protein, topological similarity of critical residues should exist in the two peptides, as the two peptides do not share the same fold. We have hypothesized previously that the area consisting of Val23, Val29, Phe31 and Ile33 in the 4-kDa peptide  is involved in binding to the 43-kDa protein because of topochemical similarity to the active area of insulin consisting of ValA3, TyrA19, ValB12 and TyrB16 (Fig. 7D,E,F). In the active state, insulin exposes the active area (ValA3, TyrA19, ValB12 and TyrB16) for entry into the insulin receptor (Fig. 7E) . Among the mutations of these four residues in the 4-kDa peptide (Val23, Val29, Phe31 and Ile33), three (Val29, Phe31 and Ile33) were involved in affinity for the 43-kDa protein. Instead of Val23, Ile25 was found to be important for binding to the 43-kDa protein. The topology of the side-chains of Ile25, Val29, Phe31 and Ile33 in the 4-kDa peptide was similar to that of the active area in insulin (Fig. 7F). If the mechanism of the interaction between the 4-kDa peptide and 43-kDa protein has the minimum components of insulin–insulin receptor interaction, the area consisting of Ile25, Val29, Phe31 and Ile33 in the 4-kDa peptide should play a critical role in the interaction with the 43-kDa protein. These results suggest that there might exist, on the surface of the 43-kDa protein, an area that consists of hydrophobic residues facing the hydrophobic patch in the 4-kDa peptide.
On the other hand, the C-terminal β-strand area, PheB25 and TyrB26, in insulin is required to direct the insulin receptor [18–22]. When the 4-kDa peptide was compared to the active state of insulin, Leu27 and Phe28 of the 4-kDa peptide could occupy a similar place as PheB25 and TyrB26 of insulin (Fig. 7E,F). Therefore, it is suggested that Leu27 and Phe28 share the same role as PheB25 and TyrB26 in insulin.
The area consisting of Ile25, Val29, Phe31 and Ile33 in the 4-kDa peptide is important for interaction with the 43-kDa protein (Figs 6 and 7D,E,F). Although Leu27 and Phe28 are also involved in the interaction with 43-kDa protein, the role of these residues is probably different from that of the four residues (Ile25, Val29, Phe31 and Ile33). Generally, the hydrophobic triplet of PheB24, PheB25 and TyrB26 of the C-terminal B-chain domain of insulin is important for directing the affinity of insulin receptor interaction [18–22]. As Leu27 and Phe28 of the 4-kDa peptide are located in the same region against the aromatic triplet, Leu27 and Phe28 in the 4-kDa peptide probably regulate the orientation of interaction with the 43-kDa protein.
Although the 43-kDa protein is not identical to the insulin receptor, they show a resemblance in some structural architecture. For example, both proteins form a dimer, while their protomers consist of two disulfide-linked α and β subunits, contain a cysteine-rich region in their α subunits, and show protein kinase activity in their β subunits. As mentioned above, the interaction system between 4-kDa peptide and 43-kDa protein may be similar to the insulin– insulin receptor interaction system.
We thank Prof. F. X. Avilés and Dr N. Islam for their invaluable suggestions during this work. We also thank Dr M. Takaoka for her help in producing the recombinant 4-kDa peptide. This work was supported in parts by grants for the National Project on Protein Structural and Functional Analysis to H.H.