Funding Information This work was financially supported by the China National Critical Project for Science and Technology on Water Pollution Prevention and Control under Grant no. 2012ZX07101-012-03 and the National 863 Project of China with Grant no. 2006AA06Z327.
Methane can be used as an alternative carbon source in biological denitrification because it is nontoxic, widely available and relatively inexpensive. A microbial consortium involved in methane oxidation coupled to denitrification (MOD) was enriched with nitrite and nitrate as electron acceptors under micro-aerobic conditions. The 16S rRNA gene combined with pmoA phylogeny of methanotrophs and nirK phylogeny of denitrifiers were analysed to reveal the dominant microbial populations and functional microorganisms. Real-time quantitative polymerase chain reaction results showed high numbers of methanotrophs and denitrifiers in the enriched consortium. The 16S rRNA gene clone library revealed that Methylococcaceae and Methylophilaceae were the dominant populations in the MOD ecosystem. Phylogenetic analyses of pmoA gene clone libraries indicated that all methanotrophs belonged to Methylococcaceae, a type I methanotroph employing the ribulose monophosphate pathway for methane oxidation. Methylotrophic denitrifiers of the Methylophilaceae that can utilize organic intermediates (i.e. formaldehyde, citrate and acetate) released from the methanotrophs played a vital role in aerobic denitrification. This study is the first report to confirm micro-aerobic denitrification and to make phylogenetic and functional assignments for some members of the microbial assemblages involved in MOD.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.
Denitrification is an important transformation in the cycling of nitrogen (N), which is ubiquitous and involves a stepwise reduction of nitrate (NO3−) to nitrogen oxides and nitrogen gas (N2). Biological removal of NO3− and/or nitrite (NO2−) from wastewater, groundwater, landfill leachate and drinking water is commonly achieved by denitrification (Zumft, 1997). Supplemental organic carbon sources are generally added during denitrification, serving as electron donors, which adds cost to wastewater treatment processes. Methane (CH4) has been proposed as a relatively inexpensive, widely available, nontoxic carbon source, which is produced as a biogas by anaerobic waste processing and is available in many landfill sites and wastewater treatment plants. Denitrification using CH4 as an electron donor is an interesting option for biological nitrogen removal in this respect (Costa et al., 2000).
Methane oxidation coupled to denitrification (MOD) in the presence of oxygen (O2) has been shown in many studies. Eisentraeger and colleagues (2001) found that CH4 could be used as hydrogen donor for the in situ denitrification of groundwater. Waki and colleagues (2005) detected a denitrification rate of 4.29 mmol N l−1 day−1 using CH4 as the sole carbon source in a divided headspace reactor, where CH4 and air were sparged into opposite separate ends of an activated sludge tank (21% O2). Membrane biofilm reactors have been shown to achieve high NO3− removal efficiencies compared with previously known rates for suspended cultures (Modin et al., 2008). It has been suggested that in the aerobic MOD process, methanotrophs oxidize CH4 aerobically and release organic compounds, which are then used by habiting denitrifiers as electron donors for anaerobic respiration (Modin et al., 2007). An association between methanotrophic and denitrifying bacteria surviving on CH4 as the sole carbon source and accomplishing denitrification was first demonstrated by Rhee and Fuhs (1978). They indicated that denitrifiers reduced NO3− using citrate released from the CH4 oxidation. So far, previous studies have demonstrated directly or indirectly that methanotrophs can excrete methanol (Costa et al., 2000; Eisentraeger et al., 2001), citrate (Rhee and Fuhs, 1978), acetate (Costa et al., 2000), proteins (Eisentraeger et al., 2001), etc. to serve as the carbon and energy sources for denitrification. Although Osaka and colleagues (2008) revealed bacterial populations and methanotrophic populations by T-restriction fragment length polymorphism (RFLP) analysis of 16S rRNA genes and cloning of pmoA genes in an aerobic MOD ecosystem and many investigations of aerobic MOD have focused on denitrification, the mechanisms and microbial communities participating in these processes have not yet been confirmed.
Anaerobic denitrifying bacteria are characterized by the ability to use nitrogen oxides (NO3− and NO2−) as electron acceptors producing dinitrogen monoxide (N2O) and dinitrogen (N2), which is inhibited by O2 (Knowles, 1982). However, some species are capable of simultaneously utilizing NO3− and O2 as terminal electron acceptors (TEAs) in respiration, termed aerobic denitrification (Robertson and Kuenen, 1984). Although aerobic MOD has been investigated for several years, it is still unclear whether anaerobic or aerobic denitrification dominates in this process. Modin and colleagues (2007) put forward a theoretical model that indicated the optimal O2 dissolution rate in aerobic MOD systems should be as high as possible to maximize the methanotrophs' ability to oxidize CH4 and thereby provide organic substrates for coexisting denitrifiers but at the same time low enough for the dissolved oxygen (DO) concentration to remain at a level that does not inhibit denitrification. Thus, micro-aerobic conditions might be more favourable for the MOD process, especially for promoting denitrification activity. Nevertheless, to our knowledge, few or no studies have focused on the effect of both NO2− and NO3− in a micro-aerobic MOD system. Moreover, the microbial composition of the mixed cultures involved are not yet clarified.
The pmoA gene encoding the α-subunit of the particulate methane monooxygenase (pMMO) enzyme can be used as a functional phylogenetic marker to identify methanotrophic bacteria and is present in almost all known methanotrophs (Holmes et al., 1995). The reduction of NO2− to nitric oxide (NO) by nitrite reductase is the first step that distinguishes denitrifiers from nitrate-respiring bacteria. Two structurally different nitrite reductases are found among denitrifiers: a copper-containing nitrite reductase encoded by the nirK gene and a cytochrome cd1-nitrite reductase encoded by the nirS gene (Zumft, 1997). The pmoA and nirK genes have been used as functional markers for cultivation-independent studies of the methanotrophic and denitrifying bacteria respectively (Lardy et al., 2010; Smith et al., 2010).
The objective of this study was to examine whether denitrification using NO2− and NO3− as electron acceptors with CH4 as the sole electron donor in a microaerophilic environment was possible and to indentify the associated intermediates, microbial community composition, and the primary microorganisms involved in this previously poorly characterized process. Experiments on the enrichment of methanotrophic bacteria under micro-aerobic conditions were performed using NO2− and NO3− as electron acceptors. Denitrification was assessed by quantifying of NO2− and NO3− consumption. In order to obtain insight into the microbial communities involved in MOD, a culture-independent DNA-based molecular phylogenetic approach was performed using the bacterial 16S rRNA genes, and pmoA and nirK gene clone libraries derived from the enrichment culture.
Performance of the reactor and batch culture experiments
The reactor was seeded with activated sediment from the 16 years old leachate collection pond of a landfill site. The reactor was operated for 430 days in the presence of CH4 as sole electron donor under micro-aerobic conditions. The effluent pH of the reactor was 7.2–7.5 after day 50. Because of the high concentration of ammonium (NH4+) in the seeded sediment, the effluent NH4+ decreased gradually to 0 after 100 days of incubation. Consumption of clear NO2− and NO3− was observed during the entire incubation period (Fig. 1). The consumption of NO2− and NO3− decreased gradually in the initial 100 days, while residual organic carbon sources were exhausted completely. From day 100 to 340, NO2− and NO3− consumptions increased slowly. In the steady phase, after incubation for 340 days, the effluent NO2− and NO3− concentrations remained stable at around 3.57 and 4.28 mM, with consumption rates approximately at 3.0 and 1.5 mmol N l−1 day−1 respectively.
The concentrations of CH4 and DO in the culture were around 0.23 and 0.22 mg l−1 respectively. There were obvious increases in soluble organic compounds between the influent and effluent liquid of the reactor. In particular, the concentrations of formaldehyde, citrate and acetate were greatly improved (Table 1).
Table 1. Organic carbon concentrations in the influent and effluent of liquid batch culture samples
Influent (μg l−1)
Effluent (μg l−1)
ND, not detected.
11.50 ± 0.71
405.00 ± 7.07
236.67 ± 5.77
22.50 ± 0.71
115.00 ± 7.07
0.95 ± 0.07
22.33 ± 1.53
0.40 ± 0.00
Methane oxidation activity and its coupling to denitrification were demonstrated in the batch experiments. The DO at T1 and T2 was 3.96 ± 0.09 and 0.24 ± 0.01 mg l−1 respectively. Volatile suspended solids in the sludge used in the assays were 24.98 ± 1.24 g l−1. Both of the treatments exhibited relatively high levels of CH4 oxidation and denitrification activity (Table 2) under both micro-aerobic and aerobic conditions. Furthermore, methane oxidation activity and denitrification activity under aerobic conditions (T1) were about twice higher than that measured under micro-aerobic conditions (T2). Compared with the control assay, both treatments resulted in high amounts of formaldehyde, citrate and acetate, which was in accordance with the results of the enrichment culture (Tables 1 and 2).
Table 2. Chemical activity in the batch culture experiments
VSS, volatile suspended solid.
CH4 : O2
Dissolved O2 (mg l−1)
3.96 ± 0.09
0.24 ± 0.01
Methane oxidation activity (μmol g VSS−1 day−1)
640.16 ± 88.76
354.21 ± 45.62
Denitrification activity (μmol g VSS−1 day−1)
Nitrite consumption rate
68.39 ± 2.90
46.50 ± 6.19
28.03 ± 1.59
Nitrate consumption rate
25.50 ± 2.33
13.18 ± 2.07
5.02 ± 1.78
Formaldehyde (μg l−1)
355.00 ± 7.07
405.00 ± 7.07
19.50 ± 0.71
Citrate (μg l−1)
350.00 ± 14.14
320.00 ± 14.14
55.00 ± 7.07
Acetate (μg l−1)
130.00 ± 21.21
150.00 ± 0.00
17.2 ± 2.12
Formate (μg l−1)
24.70 ± 0.71
27.20 ± 1.41
0.6 ± 0.14
Methanol (μg l−1)
0.50 ± 0.00
0.55 ± 0.07
0.15 ± 0.07
Phylogenetic analysis of bacterial communities based on the 16S rRNA gene clone library
A 16S rRNA gene clone library was constructed from total-community genomic DNA extracted from the enrichment culture after 1 year of cultivation, when the reactor was at a steady state. A total of 63 phylotypes affiliated with seven distinct phyla were examined among 136 randomly selected non-chimeric rDNA clones based on their RFLP patterns. The phylogenetic analysis of the phylotypes obtained was performed with reference sequences obtained from the GenBank database. The phylogenetic analyses showed that approximately 50% of bacterial sequences had close matches to counterparts in the public database (>98%). However, some clones displayed lower levels of similarity (<90%) to any other reported 16S rRNA gene sequences retrieved from GenBank database (Table 3). A distance-based neighbour-joining tree was constructed with the 63 phylotypes and their closely related reference sequences obtained from the GenBank database (Fig. 2).
Table 3. Phylogenetic affiliation of clones from the bacterial 16S rRNA gene library
No. of phylotypes
Proportion of phylotypes (%)
No. of clones
Proportion of clones (%)
% Sequence similarity to its closest relatives
A majority of the clones belonged to the phylum Proteobacteria (115 of 136). The proteobacterial clones grouped into three classes, Alphaproteobacteria, Betaproteobacteria and Gammaproteobacteria. Most of the phylotypes were <98% identical to any previously determined rRNA gene sequences, although some of them were closely related to identified environmental clones. Overall, the proteobacterial phylotypes did not exhibit high phylogenetic diversity. The clone library showed a clear predominance of sequences related to Methylophilaceae in the Betaproteobacteria and to Methylococcaceae in the Gammaproteobacteria. Phylogenetic analyses indicated that the phylotypes associated with oxidation of CH4, oxidation of methanol and denitrification were all detected within the phylum Proteobacteria. The only phylotype belonging to Alphaproteobacteria was clone S5, remotely related (89.4% similarity) to Nitrobacter sp., which plays an important role in the nitrogen cycle by oxidizing NO2− and NO3−.
Thirty-one phylotypes, representing 60 clones and accounting for 44% of the total number of clones, were related to the Betaproteobacteria. Twenty-two phylotypes, representing 50 clones, branched into a clade that was supported by strong bootstrap values within the family Methylophilaceae, although several of them were individually deep-branched in the phylogenetic tree. No closely related cultivated species were found for S72, the second most abundant Betaproteobacteria-related phylotype obtained. This phylotype, representing 16 clones, was associated phylogenetically (99.4% similarity) with a bacterial clone recently recovered from a sediment slurry (EU542425.2). Phylotypes S52 and S137 were closely affiliated with Methylibium aquaticum, a known chemoheterotrophic facultative methylotrophic bacterium isolated from an eutrophic freshwater pond previously (Song and Cho, 2007). Phylotype S9 was 92.6% identical to Methylocaldum sp. 05J-I-7 (EU275146.1), a methylotrophic bacterium retrieved previously from landfill upland soil, clustered with the Betaproteobacteria-related clones in a clade distinct from the Gammaproteobacteria on the tree, which was supported by strong bootstrap values. These results indicated that they were novel microorganisms enriched in the MOD enrichment culture. Phylotype S244 was most closely affiliated with the denitrifier Steroidobacter sp., an ecologically important bacterium with the ability to reduce NO3− to N2O and further to N2 without any intermediate accumulation of NO2− (Fahrbach et al., 2008). Phylotype S103 and S37 grouped within the genus Hydrogenophaga, which can metabolize NO3− via heterotrophic denitrification (Willems et al., 1989).
The remaining 12 proteobacterial phylotypes, representing 55 clones and accounting for 40% of the total number of clones, were Gammaproteobacteria related. Of these, eight phylotypes representing 50 clones clustered within the Methylobacter genus and comprised 37% of the clone library. The most numerically dominant phylotype, S2, representing 39 clones and comprising 29% of the total number of clones, was 99.0% identical to an obligate methanotroph, Methylobacter marinus, which was isolated previously from seawater near a sewage outfall in California and utilizes methane and methanol as sole sources of carbon and energy (Lidstrom, 1988; Bowman et al., 1993). Phylotype S85 clustered with Methylocaldum szegediense, which can use methane as the sole source of carbon and energy (Bodrossy et al., 1997).
Moreover, the remaining 21 clones, represented by 19 phylotypes of nonmethanotrophs and nonmethylotrophs (i.e. Bacteroidetes, Chloroflexi, Actinobacteria, Nitrospirae, Verrucomicrobia and Chlorobi), were also detected in this library (15%) (Table 3). The phylotypes S190 and S196 clustered within the phylum Nitrospirae and branched into a clade with members of the genus Nitrospira, which are responsible for NO2− oxidation in most wastewater treatment systems (Spieck et al., 2006).
Phylogenetic analysis of methanotrophic populations based on the pmoA gene
To characterize the methanotrophic population in the enrichment culture, the pmoA gene clone library was constructed from the same DNA templates as the 16S rRNA gene clone library. All the pmoA gene sequences clustered together on the phylogenetic tree, forming a monophyletic clade confirmed by bootstrap analysis (Fig. 3). The methanotrophic population as determined from the pmoA gene clone library was consistent with the results from the 16S rRNA gene clone library, although there were differences in the number of the Methylocaldum-related clones in these two clone libraries. A total of 18 phylotypes, examined among 229 pmoA gene clones, were affiliated with type I methanotrophs and fell into two groups within family Methylococcaceae of the Gammaproteobacteria. One group consisted of 109 clones, represented by 10 phylotypes, which belonged to the genus Methylobacter. However, all of the Methylobacter spp. exhibited relatively low level of similarity (<97%) with any sequences documented previously in the public databases. The other group included the remaining 120 clones, represented by eight phylotypes, which was closely related to the genus Methylocaldum, and they all displayed a high level of similarity (>99%) with their closest counterparts in public databases.
Phylogenetic analysis of denitrifier populations based on the nirK gene
To characterize the denitrifying community in the enrichment culture, a nirK gene clone library was constructed from the same DNA templates used to construct the 16S rRNA gene clone library. A total of 22 phylotypes was examined from 52 randomly selected nonchimeric nirK gene clones as determined from RFLP patterns. The dendrogram of deduced amino acids showed three major clusters of nirK sequences (Fig. 4). Eighteen phylotypes representing 31 clones branched into two clades affiliated with Alphaproteobacteria. Most Alphaproteobacteria-related nirK clones were similar to uncultured bacteria or DNA sequenced from denaturing gradient gel electrophoresis bands obtained from a variety of environments, including activated sludge, biofilms, polluted water and soil. The remaining four phylotypes representing 21 nirK clones grouped within Betaproteobacteria. Of these, K251 and K118 were affiliated most closely (99.6% similarity) with Enterococcus sp. R24626, a denitrifier belonging to a less well-known denitrifying genus (Heylen et al., 2006). K4 was closely related (99.6% similarity) to the nirK sequence of an uncultured acetate-assimilating bacterium sampled under nitrate-reducing conditions (Osaka et al., 2006).
Although some of the nirK gene clones were closely related to cultured species (i.e. K251and K118), most of the nirK clones were distantly associated with the database sequences. BLAST (Basic Local Alignment Search Tool) comparisons showed that the homology between the nirK clones and database sequences ranged from 77.5–99.6%. Many phylotypes had remote phylogenetic association with other reported nirK sequences and were deeply branched in the phylogenetic tree, suggesting that these isolates might represent new species taxonomically.
Quantification of methanotrophs and denitrifiers
Quantitative polymerase chain reaction (qPCR) was performed based on the V3 region of the 16S rRNA gene, pmoA gene and nirK gene sequences, to quantify the total bacteria, methane-oxidizing bacteria and denitrifying bacteria in the reactor after 1 year of enrichment cultivation. In the qPCR assay, the same DNA templates were used to construct the clone libraries. A high number (>109) of gene copies were obtained for each of the three targeted genes, indicating that methanotrophs and denitrifiers were highly enriched in the reactor (Table 4).
Table 4. Quantification of the bacterial populations of the enrichment culture
No. of gene copies (× 109 ml−1 sludge)
16S rRNA gene
13.71 ± 1.22
8.71 ± 0.22
2.60 ± 0.07
MOD in the presence of O2 has been demonstrated in many studies (Thalasso et al., 1997; Eisentraeger et al., 2001; Modin et al., 2008). However, less is known about the mechanism and the key microbial populations responsible for this process. This study is the first to report that denitrification operated under micro-aerobic condition in which CH4 was used as the electron donor, and NO2− and NO3− as electron acceptors. Identifications of the chemical intermediates and the primary functional microorganisms are important steps in understanding the roles of different bacteria in this special process. In this study we characterized the phylogenetic composition of bacterial communities involved in MOD by 16S rRNA gene sequencing. Additionally, pmoA and nirK gene sequence analysis allowed us to identify some bacterial groups involved in these poorly studied but important biogeochemical processes.
A bacterial consortium performing MOD using both NO2− and NO3− as electron acceptors under micro-aerobic conditions was successfully enriched in this study. Steady NO2− and NO3− consumptions were observed in the enrichment culture, where only trace amounts of DO were detected in the culture medium. It has been demonstrated previously that some methanotrophs prefer micro-aerobic conditions (Mancinelli, 1995) and that methane-oxidizing enzymes have high affinities for O2 (Dalton, 1992). The batch experiment not only confirmed the occurrence of CH4 oxidation under micro-aerobic conditions but also indicated that more oxygen would likely promote methane oxidation activity. It has long been understood that DO generally suppresses denitrification activity because oxygen, when present, is the preferred TEAs for respiration. As a result, denitrifiers normally use NO2− and NO3− as TEAs only when oxygen is depleted in the environment (Zumft, 1997). However, we have shown that denitrification was not inhibited under our experimental conditions as the consumption of NO2−-N and NO3−-N was observed in both reactors in the batch experiments.
NO2− and NO3− consumption rates in T1 (90:10, CH4 : O2) were significantly higher than in T2 (99:1, CH4 : O2), which suggested that a higher concentration of O2 in the reactor could promote more efficient denitrification. It is possible that NO2− and NO3− depletion might be associated with aerobic denitrification because aerobic denitrifiers can co-respire by using NO2− or NO3−, and O2 simultaneously as electron acceptors (Robertson et al., 1988). We did not measure N removal caused by assimilation, but no significant differences were observed in the concentrations of various organic compounds produced in T1 and T2, which suggests that denitrifiers exhibited higher activity and consumed more organic carbon in the aerobic treatment.
Methanotrophs in the enrichment culture could be classified into two genera within the family Methylococcaceae in the Gammaproteobacteria (i.e. Methylobacter and Methylocaldum) based on the phylogenetic analyses of pmoA and 16S rRNA genes sequences. The phylogenetic analyses showed that all of the methanotrophs in the enrichment culture belonged to type I methanotrophs, which employ the ribulose monophosphate (RuMP) pathway to assimilate formaldehyde (Wise et al., 1999). Type I methanotrophs in the family Methylococcaceae were the key functional populations in our MOD bioreactor. Previous studies have shown that a large number of methanotrophic bacteria that belong to the type II methanotrophs were present in an oxygen-limited MOD ecosystem (Costa et al., 2000) and that uncultured type X methanotrophs belonging to the Gammaproteobacteria were dominant in MOD incubations (Osaka et al., 2008). In general, type X methanotrophs grow at higher temperatures (Hanson and Hanson, 1996). The concentrations of CH4, O2 and inorganic nitrogen are typically the primary determinants of the type of methanotrophs present in an environment (Hanson and Hanson, 1996). Graham and colleagues (1993) demonstrated that the growth of type II methanotrophs was favoured under low-oxygen, high-methane conditions, and type I methanotrophs outcompeted type II methanotrophs at low-methane concentrations. Here, we enriched type I methanotrophs under low-oxygen, high-methane conditions. Type I methanotrophs tend to predominate under eutrophic conditions, whereas type II methanotrophs dominate in oligotrophic, nitrogen-limiting conditions because of its ability to fix nitrogen (Hanson and Wattenberg, 1991; Hanson and Hanson, 1996). Mohanty and colleagues (2006) demonstrated that nitrogenous fertilizers stimulated CH4 consumption and the growth of type I methanotrophs, whereas type II methanotrophs were inhibited. High levels of NO2− and NO3− in the bioreactor of this study stimulated the growth of type I methanotrophs. Different from type I methanotrophs, type II methanotrophs also assimilate carbon through the oxidation of formaldehyde but use the serine pathway (Wise et al., 1999). The RuMP pathway has been shown to be more efficient than the serine cycle, with conversion efficiencies of about 65–80% and 40–60% for methylotrophs using each of these pathways respectively (Anthony, 1982). Type I methanotrophs with their higher CH4 oxidation rate would have provided more soluble organic compounds for denitrifiers to reduce NO2− and NO3− to N2. Thus, we suggest that the abundance of nitrite and nitrate, and the presence of organic compounds for denitrifiers to respire were factors that allowed type I methanotrophs to outcompete type II methanotrophs in our MOD bioreactor.
At the same time, high numbers of nonmethanotrophic bacteria capable of denitrification were enriched along with the methanotrophic bacteria under our experimental conditions. From the enrichment culture and batch experiment, we infered that aerobic denitrification was conducted by certain species of bacteria that utilized O2, NO2− and/or NO3− simultaneously as electron acceptors. The existence and the growth of aerobic denitrifiers have been reported to occur in various environments (Frette et al., 1997; Huang and Tseng, 2001). In our batch experiments, enriched sludge in the aerobic treatment exhibited about twice as much denitrification activity compared with that in micro-aerobic treatment. It has been shown that aerobic denitrifiers grow more rapidly and denitrify more actively in the presence of both oxygen and NO3− than in the presence of a single electron acceptor (Robertson et al., 1989). Furthermore, aerobic denitrifiers have been shown to use a variety of carbon sources as electron donors for oxygen respiration and denitrification, and that some of them prefer one-carbon compounds, such as methanol and formate (Takaya et al., 2003). Although there were no significant differences between the concentrations of organic compounds in micro-aerobic and aerobic treatments, we speculated that higher denitrification activity could consume more organic carbon, which reduced the amount of formaldehyde, citrate, acetate, etc. in the aerobic treatment. In the 16S rRNA gene clone library, the major phylotypes within nonmethanotrophs were related to the Methylophilaceae, which are strict facultative methylotrophs. Combined with phylogenetic analysis of the nirK gene clone library, we suggest that clones in our reactor belonging to the Methylophilaceae might be novel denitrifiers. Uncultured Methylophilaceae have been identified as important methylotrophic denitrifiers in sewage sludge (Osaka et al., 2006). Recently, some members of Methylophilaceae have been identified as aerobic methylotrophic denitrifiers in freshwater lake sediment, and they were demonstrated to be able to grow using one-carbon compounds, such as methanol, as carbon sources and nitrate as the TEAs under aerobic conditions (Kalyuhznaya et al., 2009). Our results indicated that these methylotrophic denitrifiers related to the Methylophilaceae facilitated denitrification in our MOD bioreactor.
Denitrifying bacteria can associate with methanotrophs and use simple carbon compounds released by the methanotrophs as substrates for denitrification reactions and growth in MOD. The soluble organic compounds may include methanol, citrate, acetate, proteins, etc. (Modin et al., 2007). In this study, analysis of the influent and effluent of the enrichment culture, as well as the batch experiments, showed that formaldehyde, citrate and acetate were the most prevalent compounds, which were released by the methanotrophic bacteria and supported growth and activity of denitrifiers. These organic compounds played a significant role as hydrogen donors for the indirect denitrification under CH4 oxidizing conditions. The compositions of the organic substances excreted by methanotrophs are highly dependent on the culture conditions and dominant methanotrophic species. How the methanotrophs regulate their carbon assimilation pathway might be confirmed by experiments using 13C-methane.
The results presented in this paper confirm experimentally that aerobic denitrification can be performed with CH4 as the sole hydrogen donor under micro-aerobic conditions using NO2− and NO3− as electron acceptors. Composition of microbial communities and primary functional microorganisms in the MOD ecosystem bioreactor were investigated by a culture-independent DNA-based molecular phylogenetic approach. Clear NO2− and NO3− consumptions were observed using CH4 as sole electron donor during the culture process. Microbial community in the enrichment culture was dominated by Methylophilaceae and Methylococcaceae. Type I methanotrophs in the family of Methylococcaceae played a major role as key functional populations in MOD ecosystem under the micro-aerobic condition of this study. In addition to methanotrophic bacteria, large numbers of methylotrophic denitrifiers belonging to Methylophilaceae were enriched as well in the reactor implying their potential importance in aerobic denitrification. Formaldehyde, citrate and acetate were key substrates for trophic links between methanotrophs and denitrifiers in MOD ecosystems. The molecular phylogenetic analysis has given a first insight of the pivotal microbial populations and functional microorganisms involved in the micro-aerobic MOD ecosystem and can be used as a starting point for further studies.
Sampling and enrichment
Sediment samples were obtained in May 2009 from a 16 years old leachate collection pond at the Dongyang Landfill (29°14′49″N, 120°15′57″E), a waste disposal site for municipal solid waste in Zhejiang Province, PR China. The samples were transported to the lab and mixed with ambient leachate to obtain a homogeneous slurry (1 l) used for inoculation.
The sediment slurry was incubated in a 3 l plexiglass bioreactor, which was operated aseptically in a sequencing-batch mode to prevent loss of biomass. A 12 h cycle consisted of 10 h of stirring at 150 r.p.m., a settling period of 1.75 h and 0.25 h to draw off 150 ml of liquid from above the settled sediment. A 1.5 h continuous supply of 150 ml medium was included in the 12 h cycle. During the stirring time, the culture was stirred gently at 150 r.p.m., sparged with CH4, carbon dioxide (CO2) and O2 (94:5:1, v/v/v > 99.9%; flow rate, 10 ml min−1). The medium was sparged continuously with argon (Ar) and CO2 (95:5, v/v) to maintain anoxic conditions and contained the following components (l−1): 1.25 g KHCO3, 0.05 g KH2PO4, 0.30 g CaCl2·2H2O, 0.20 g MgSO4·7H2O, 0.425 g (5 mM) NaNO3, 0.345 g (5 mM) NaNO2, 1.0 ml acidic trace element solution, and 1.0 ml alkaline trace element solution. The acidic (100 mM HCl) trace element solution contained (l−1): 15 g ethylenediaminetetraacetic acid, 2.085 g FeSO4·7H2O, 0.068 g ZnSO4·7H2O, 0.12 g CoCl2·6H2O, 0.5 g MnCl2·4H2O, 0.32 g CuSO4, 0.095 g NiCl2·6H2O and 0.014 g H3BO3. The alkaline (10 mM NaOH) trace element solution contained (l−1): 0.067 g SeO2, 0.050 g Na2WO4·2H2O and 0.242 g Na2MoO4. The final concentrations of NO2− and NO3− in the medium were both 5 mM. The salts were dissolved in deionized water. All medium components were sterilized by autoclaving and mixed aseptically.
The minimum liquid volume of the enrichment culture was kept at 1.5 l by a level controller, and the maximum volume at the end of a filling period was 1.65 l. A gas buffer (l l) was filled with ultrapure water, which was used to prevent entry of air. The culture vessel was wrapped in black foil and run at 28 ± 1°C. The pH, NO2− and NO3− concentrations of the influent and effluent were analysed daily.
Batch culture experiments
Batch culture experiments were carried out in 100 ml glass vials with butyl rubber stoppers and seals. The vials were filled with 10 ml medium sterilized by autoclaving and 8 ml enriched sludge. The medium contained the same components as the enrichment culture. Two treatments were performed. The gas headspace of the Treatment 1 (T1) vials was replaced with CH4-O2 (90:10, v/v > 99.9%) to maintain aerobic conditions; the gas headspace of the Treatment 2 (T2) vials were replaced with CH4-O2 (99:1, v/v > 99.9%) to create micro-aerobic conditions. Control assay was conducted in which the headspace of the vials was replaced with N2 (>99.99%). The CH4-dependent denitrification and the control assays were incubated in duplicate at 28 ± 1°C in the dark with shaking at 150 r.p.m. for 52 h. The concentration of CH4 in the headspaces, and NO2−, NO3− and simple organic carbon concentrations in the batch cultures were measured at the beginning and the end of the incubations as described later.
All the chemical analyses were conducted according to standard methods (State Environmental Protection Administration of China, 2002). pH was measured by a pH analyser (Mettler Toledo, SG2, Greifensee, Switzerland). NO3− concentration was determined by phenol disulfonic acid spectrophotometry, and NO2− concentrations were determined with sulphanilamide and N-(1-naphthyl)-ethylenediamine spectrophotometrically. The concentrations of simple organic carbon molecules (i.e. formaldehyde, citrate, acetate, formate and methanol), O2 and CH4 were determined with a gas chromatography/mass spectrometry instrument (HP6890GC/5973MS, Agilent Technologies, Palo Alto, CA, USA). Every measurement was made in triplicate.
For the clone libraries, a 10 ml suspension was taken from the enrichment culture for DNA isolation after 1 year. Total DNA was extracted from approximately 0.5 ml of the sediment after allowing the suspension state to settle for 15 min using a beating method (FastDNA™ SPIN kit for soil, Bio101, Inc., La Jolla, CA, USA) following the manufacturer's protocol. DNA quality was checked by 1.5% agarose gel electrophoresis, and DNA extracts were stored at −20°C for downstream analyses.
Bacteria 16S rRNA genes were amplified by PCR using the universal primer pair 27f-1492r (Lane, 1991). The PCR reaction mixture and amplification conditions were performed as described previously (Liu et al., 2011).
Primer pair A189-mb661 was used to amplify an internal region of the pMMO (Costello and Lidstrom, 1999), which specifically targets the pmoA gene. DNA was amplified in a Hybrid PCR Express thermal cycler (Bio-Rad, Hercules, CA, USA) in 0.2 ml PCR tubes using 50 μl reaction volumes. The reaction mixture contained the following components: 10 mM Tris-HCl, 50 mM KCl, 2.5 mM MgCl2, 0.2 mM of each deoxyribonucleoside triphosphate (dNTP), 0.4 μM of each primer (20 μM), 0.25 U of Taq DNA polymerase (TaKaRa, Dalian, China), 2 μl of template DNA. A touchdown PCR program was optimized and consisted of an initial denaturation step of 5 min at 94°C, followed by 16 touchdown cycles (60–52°C) and 18 further cycles at 52°C for 1 min, followed by 72°C for 1 min and a final extension of 72°C for 5 min.
Fragments of the nitrite reductase gene (nirK) were amplified using the specific primer pair nirK1F-nirK5R (Braker et al., 1998). PCR was run in a Hybrid PCR Express thermal cycler in 0.2 ml tubes using 20 μl reaction volumes. The reaction mixture contained the following components: 10 mM Tris-HCl, 50 mM KCl, 2.5 mM MgCl2, 0.2 mM of each dNTP, 0.4 μM of each primer (20 μM), 1 U of Taq DNA polymerase (TaKaRa), 2 μl of template DNA. DNA was denatured at 94°C for 5 min; 40 cycles of PCR were performed at 94°C for 30 s, 55°C for 30 s and 72°C for 40 s with a final extension at 72°C for 10 min.
The expected size of the fragments amplified was approximately 1460 bp for 16S rRNA gene, 470 bp for pmoA gene and 510 bp for nirK gene. Amplified products were analysed on a 1.5% agarose gel running in Tris-acetate-EDTA (TAE) buffer, stained with SYBR Green I (Invitrogen Biotechnology Co., Ltd, Shanghai, China) and ultraviolet illuminated.
Clone library construction and phylogenetic analysis
Amplified products were purified and subsequently cloned as described previously (Liu et al., 2011). Recombinant clones were randomly selected. Preliminary screening was done by directly reamplifying recombinant clones with the vector primer pair M13-47 and RV-M, and analysed for plasmids containing inserts by 1.5% agarose gel electrophoresis. The amplifications of positive clones were subjected to RFLP analysis by enzymatic digestions with restriction enzymes Hha I (Takara) following the manufacturer's instructions, and the digested nucleotide fragments were electrophoresed in 3% TAE-agarose gels. Clones were grouped according to RFLP banding patterns, and image analyses were performed visually to identify unique phylotypes. Sequencing was carried out by Invitrogen Corporation in China with an Applied Biosystems 3730xl DNA analyser.
All the sequences obtained in this work were checked for chimeras using the CHIMERA-CHECK online analysis program from Pintail (http://www.bioinformatics-toolkit.org). The chimeric sequences identified were not included in further phylogenetic analyses or clone library analyses. The nonchimeric sequences were submitted to the BLAST network service in the GenBank database (http://www.ncbi.nlm.nih.gov) to determine approximate phylogenetic affiliations (Altschul et al., 1997). Multiple alignments of the sequences from this study and reference sequences were performed using CLUSTAL X (Thompson et al., 1997). An average of at least 1480 nucleotides for the 16S rRNA gene, 470 nucleotides for the pmoA gene, and 510 nucleotides for the nirK gene was included in the phylogenetic analysis respectively. The phylogenetic trees were constructed based on a neighbour-joining algorithm (Saitou and Nei, 1987) in the MEGA4 computer software program (Tamura et al., 2007), using the Jukes-Cantor model (Jukes and Cantor, 1969). The confidence values of branches in the phylogenetic trees were determined using bootstrap analysis based on 1000 resamplings.
Primer combinations of 338F-518R (Lane, 1991), A189-mb661 and nirK1F-nirK5R were used to quantify total bacteria, methane-oxidizing bacteria and denitrifying bacteria respectively. Real-time qPCR was performed with an iCycler iQ5 thermocycler and real-time detection system (Bio-Rad). For the standard curves, the plasmids were isolated and purified with the Plasmid Mini Kit (OMEGA Bio-Tek Inc., Doraville, GA, USA) from the clones in the relevant clone library. Each qPCR assay (25 μl) included 12.5 μl of 2 × SYBR Premix Ex Taq (Takara), 1 μl of each forward and reverse primer (20 μM), either 1 μl of template DNA or 10−1 to 10−6 ng of the standard vector plasmid of the clones grown as single cellular suspensions. The optimized thermal cycling was initiated with 3 min at 95°C, followed by 37 cycles of 15 s at 95°C, 30 s at 60°C (total bacteria and methane-oxidizing bacteria) or 55°C (denitrifying bacteria), and 30 s at 72°C. A melting curve analysis for the SYBR green assay was done after amplification to distinguish the targeted PCR products from the nontargeted PCR products.
Nucleotide sequence accession numbers
The sequences of 16S rRNA genes have been deposited in the GenBank database under accession no. JN217030 to JN217092, pmoA gene sequences were assigned the accession numbers JN255553 to JN255570, and nirK gene sequences were assigned the accession numbers JN255526 to JN255547.
The authors would like to gratefully acknowledge Professor Sunny Jiang from University of California, Irvine, for critically comments that improved the manuscript.