Clinical Oral Implants Research

Rotating titanium brush for plaque removal from rough titanium surfaces – an in vitro study

Authors


Abstract

Objectives

The purpose of this study was the evaluation of the effectiveness of plaque removing of a new rotating brush made of titanium in comparison with the cleaning procedure with steel curettes.

Materials and methods

Plaque was collected by six volunteers for 48 h. A total of 60 samples were randomly designated to two groups: the test group TiBrush and the control group with steel curettes. The residual plaque area (RPA) and the treatment time were determined as parameters. Scanning electron microscopy (SEM) was performed for detecting possible damages of the treatment procedures.

Results

The mean RPA within the TiBrush group (8.57 ± 4.85%) was significant lower than in the control group (28.99 ± 5.51%), while the mean treatment time was also significant lower in the TiBrush group (176.7 ± 15.2 sec) in comparison with the steel curettes (303.5 ± 11.5 sec). The outcomes of SEM analysis showed no surface alteration after TiBrush treatment.

Conclusions

Within the limits of this study, this investigation concludes that TiBrush seems to be more effective in plaque removing capacity, while being gentler to the implant surface than the processing with steel curettes. These promising results could hold out an improvement of conventional periimplantitis treatment. Further studies are needed to prove these outcomes.

Ancillary