SEARCH

SEARCH BY CITATION

References

  • 1
    Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on “Type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information,” Official Journal of the European Union (2007).
  • 2
    Bojarra T., Technische Entwicklung, Konzernlastenheft-LAH 8W0 721, Fushebelwerk, Volkswagen AG, Audi, Deutschland (2010).
  • 3
    DIRECTIVE 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on “End-of life vehicles,” Official Journal of the European Union (2000).
  • 4
    DIRECTIVE 2005/64/EC of the European Parliament and of the Council of 26 October 2005 on “The type-approval of motor vehicles with regard to their reusability, recyclability and recoverability and amending Council Directive 70/156/EEC,” Official Journal of the European Union (2005).
  • 5
    PV 3925: Polymer materials—Measuring Emissions of Formaldehyde. Volkswagen AG, Issue 2009–2006.
  • 6
    USM 1322, Agreement concerning the adoption of uniform conditions of approval and reciprocal recognition of approval for motor vehicle equipment and parts, with regard to the arrangement of foot controls. Geneva (1995).
  • 7
    ISO 14001:2004(E) International standard, Environmental management systems—Requirements with guidance for use. ISO, Geneva (2004).
  • 8
    FMEA Reference manual: Potential failure mode and effects analysis. General Motors Corporation (2008).
  • 9
    PV 2005, Vehicle Parts—Testing of Resistance to Environmental Cycle Tests, Volkswagen AG, Germany (2000).
  • 10
    TL 82184 Translation of VW standard: Brake pedal—functional requirements. Cimos, Koper, issued 2010-03.
  • 11
    GS 93008-2 BMW Group standard: Substances of concern—Prohibited and declarable substances in process material and auxiliary materials. BMW AG, Munchen, 2009-07.
  • 12
    Ord. 67/1951, “Safety Regulations for Road Vehicles,” Ministry of Land, Infrastructure and Transport Ordinance (2001).
  • 13
    Zoellner O.J., and Evans J.A., “Plastic-Metal Hybrid. A New Development in the Injection Molding Technology,” ANTEC 2002 Annual Technical Conference, San Francisco, CA, pp. 14.
  • 14
    Hybrid Technology and Structural Components, Lanxess Corporation, Pittsburg, PA (2005).
  • 15
    Goldbach H., and Koch B., Structural shell with reinforcing ribs connected via perforations, Patent US 5,190,803 (1993).
  • 16
    New Technology Article, ZF Friedrichshafen AG,URL http://www.zf.com/corporate/en/homepage/homepage.html [Last visit: 2011].
  • 17
  • 18
    Grujicic M., Sellappan V., Omar M.A., et al., “An Overview of the Polymer-to-Metal Direct-Adhesion Hybrid Technologies for Load-Bearing Automotive Components,” Journal of Materials Processing Technology 197(2008):363373 (2007).
  • 19
    Recktendwald D., “Advanced Adhesives Foster Hybrid Structures,Machine Design 77(21):124126 (2005).
  • 20
    Shah P., Adhesion of Injection Molded PVC to Silane Primed Steel, M.S. Thesis, University of Cincinnati (2005).
  • 21
    Sasaki H., Kobayashi I., Sai S., Omoto T., and Mori K., “Direct Adhesion of Nylon Resin to Stainless Steel Plates Coated With Triazine Thiol Polymer by Electro Polymerization During Injection-Molding,” Japan Journal of Polymer Science and Technology 55(8):470476 (1998).
  • 22
    Adams R.D., Adhesive Bonding: Science, Technology and Application, Woodhead Publishing Limited and CRC Press, Cambridge, England (2005).
  • 23
    Sander H., High performance adhesive bonding of Victrex peek at elevated temperatures, Victrex Europa GmbH (2000).
  • 24
    Grujicic M., Sellappan V., Omar M.A., et al., “Suitability Analysis of a Polymer-Metal Hybrid Technology Based on High-Strength Steels and Direct Polymer-to-Metal Adhesion for use in Load-Bearing Automotive Body-in-White Applications,” Journal of Materials Processing Technology 209(2009): 18771890 (2008).
  • 25
    Grujićić M., Sellappan V., Arakere G., Seyr N., and Erdmann M., “Computational Feasibility Analysis of Direct-Adhesion Polymer-to-Metal Hybrid Technology for Load-Bearing Body-in-White Structural Components,” Journal of Materials Processing Technology (2007). ISSN: 09240136.
  • 26
    ASTM D638-08, Standard Test Method for Tensile Properties of Plastics, ASTM International (2008).
  • 27
    Rink M., “Process for Producing Bonded Plastic Metal Parts,” Patent US 5.842.265 (1998).
  • 28
    Grujićić M., Sellappan V., Arakere G., et al., “The Potential of a Clinch-Lock Polymer Metal Hybrid Technology for Use in Load-Bearing Automotive Components,” ASM International, Journal of Materials Engineering and Performance 18(7):893.
  • 29
    Endemann, U., Glaser S., and Völker M., Strong Joint Between Plastic and Metal. Kunststoffe Plast Europe, vol. 92 Carl Hanser Verlag, Mönchen (2002).
  • 30
    Paul H., and Luke M.: Langfaserverstärkte Kunststoff-Metall-Hybridverbunde. Konstruktion - Ausgabe 9-2010, S. IW 11-12.
  • 31
    Eisler H., Reif M., and Henning F., Investigations on the Mechanical Behaviour of Hybrid Polymer Metal Joints, Fraunhofer Institute, Germany (2010).
  • 32
    CATIA Version V5R18, Dassault Systemes, URL www.3ds.com (2011).
  • 33
    ABAQUS, Version 6.11, User Documentation, ABAQUS Inc., Rising Sun Mills, Providence, RI (2011).