International Journal of Applied Ceramic Technology

Cover image for Vol. 8 Issue 6

November/December 2011

Volume 8, Issue 6

Pages 1255–1524

  1. Topical Section: Ceramics for Optoelectronics

    1. Top of page
    2. Topical Section: Ceramics for Optoelectronics
    3. General Section
    1. Integrally Cored Ceramic Mold Fabricated by Ceramic Stereolithography (pages 1255–1262)

      Chang-Jun Bae and John W. Halloran

      Version of Record online: 7 OCT 2010 | DOI: 10.1111/j.1744-7402.2010.02568.x

    2. Solvent-Assisted Laser Drilling of Silicon Carbide (pages 1263–1276)

      Lee Mein Wee, Ling Eng Khoong, Chi Wai Tan and Gnian Cher Lim

      Version of Record online: 22 OCT 2010 | DOI: 10.1111/j.1744-7402.2010.02575.x

    3. A Fiber-Laser Process for Cutting Thick Yttria-Stabilized Zirconia: Application and Modeling (pages 1277–1288)

      Jonathan Parry, Rehan Ahmed, Fraser Dear, Jon Shephard, Marc Schmidt, Lin Li and Duncan Hand

      Version of Record online: 6 SEP 2010 | DOI: 10.1111/j.1744-7402.2010.02559.x

    4. Fabrication of Yttria-Stabilized Zirconia-Based Honeycomb Biofilters (pages 1305–1311)

      Gorka Gallastegui, Ana Elías and Juan Carlos Ruiz-Morales

      Version of Record online: 27 APR 2011 | DOI: 10.1111/j.1744-7402.2011.02645.x

    5. The Origin of Anisotropic Shrinkage in Tape-Cast Green Tapes (pages 1312–1319)

      Armin Dellert, Andreas Heunisch and Andreas Roosen

      Version of Record online: 8 JUL 2011 | DOI: 10.1111/j.1744-7402.2011.02665.x

    6. An Investigation of Process Parameters for Electrophoretic Deposition of Yttria-Stabilized Zirconia Using Design of Experiments (pages 1320–1333)

      Ian P. Shapiro, Hui Xu, Ping Xiao, Robert Jones and David S. Rickerby

      Version of Record online: 28 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02624.x

    7. Fabrication of ZrO2–CoAl2O4 Composite by Injection Molding and Solution Infiltration (pages 1344–1352)

      Guanwei Liu, Zhipeng Xie, Wei Wang and Yin Wu

      Version of Record online: 24 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02621.x

  2. General Section

    1. Top of page
    2. Topical Section: Ceramics for Optoelectronics
    3. General Section
    1. Effects of Thermal Cycling on the Formation of Oxide Scale of Fe–Cr Alloy Interconnects for Solid Oxide Fuel Cells (pages 1374–1381)

      Teruhisa Horita, Masashi Yoshinaga, Haruo Kishimoto, Katsuhiko Yamaji, Manuel E. Brito, YuePing Xiong and Harumi Yokokawa

      Version of Record online: 14 JAN 2011 | DOI: 10.1111/j.1744-7402.2010.02600.x

    2. In-Flight Alloying of Nanocrystalline Yttria-Stabilized Zirconia Using Suspension Spray to Produce Ultra-Low Thermal Conductivity Thermal Barriers (pages 1382–1392)

      Kent VanEvery, Matthew John M. Krane, Rodney W. Trice, Wallace Porter, Hsin Wang, Matthew Besser, Dan Sordelet, Jan Ilavsky and Jonathan Almer

      Version of Record online: 17 DEC 2010 | DOI: 10.1111/j.1744-7402.2010.02593.x

    3. Low-Temperature Sintering and Microwave Dielectric Properties of Li2ATi3O8 (A=Mg, Zn) Ceramics (pages 1400–1407)

      Sumesh George and Mailadil Thomas Sebastian

      Version of Record online: 17 DEC 2010 | DOI: 10.1111/j.1744-7402.2010.02590.x

    4. Silica Effect on Porous Calcium Phosphate Ceramics from the Freeze Gelation Route (pages 1414–1424)

      Maxim Pulkin, Dietmar Koch and Georg Grathwohl

      Version of Record online: 14 JAN 2011 | DOI: 10.1111/j.1744-7402.2010.02603.x

    5. Low-Temperature Hot Pressing of ZrB2-Based Ceramics with ZrSi2 Additives (pages 1425–1435)

      Shuqi Guo, Toshiyuki Nishimura and Yutaka Kagawa

      Version of Record online: 17 DEC 2010 | DOI: 10.1111/j.1744-7402.2010.02594.x

    6. Plasma-Sprayed Strontium- and Magnesium-Doped Lanthanum Gallate Ceramics (pages 1436–1443)

      Peter Majewski and Thorsten Maldener

      Version of Record online: 17 DEC 2010 | DOI: 10.1111/j.1744-7402.2010.02595.x

    7. Grain Growth Kinetics of Glass–Ceramic Produced From Power Plant Fly Ash (pages 1444–1450)

      A. Sukran Demirkiran, Senol Yilmaz and Ugur Sen

      Version of Record online: 14 JAN 2011 | DOI: 10.1111/j.1744-7402.2010.02598.x

    8. Preparation and Application of High Near-Infrared Reflective Green Pigment for Ceramic Tile Roofs (pages 1451–1458)

      Thadsanee Thongkanluang, Pichet Limsuwan and Pattana Rakkwamsuk

      Version of Record online: 14 JAN 2011 | DOI: 10.1111/j.1744-7402.2010.02599.x

    9. A Comparison Between FAST and SPS Apparatuses Based on the Sintering of Oxide Ceramics (pages 1459–1467)

      Jochen Langer, Dat V. Quach, Joanna R. Groza and Olivier Guillon

      Version of Record online: 14 JAN 2011 | DOI: 10.1111/j.1744-7402.2010.02604.x

    10. Comparison of Microwave and Conventionally Sintered Yttria-Doped Zirconia Ceramics (pages 1475–1485)

      Colin J. Reidy, Thomas J. Fleming, Stuart Hampshire and Mark R. Towler

      Version of Record online: 28 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02608.x

    11. Building a Sintering Front through Fast Firing (pages 1486–1493)

      Daniel E. García, Dachamir Hotza and Rolf Janssen

      Version of Record online: 24 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02609.x

    12. The Characterization of Porous Sintered Reaction-Bonded Silicon Nitride Ceramics Fabricated by Si-Additive Mixture Granules (pages 1501–1508)

      Young-Jo Park, Boo-Won Park, Sae-Hoon Lee, Jae-Wook Lee, Hui-Suk Yun and In-Hyuck Song

      Version of Record online: 24 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02614.x

    13. Ferrosilicochromium-Filled Polymer-Derived Ceramics (pages 1509–1516)

      Lorenz Schlier, Martin Steinau, Nahum Travitzky, Juergen Gegner and Peter Greil

      Version of Record online: 24 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02616.x

    14. Effect of Lead Oxide Vapor on the Strength of Alumina (pages 1517–1524)

      Abdelaziz M. Elmadani, David J. Green, Zhi-Gang Mei, Zi-Kui Liu and Steve Dynan

      Version of Record online: 24 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02619.x

SEARCH

SEARCH BY CITATION