International Journal of Applied Ceramic Technology

Cover image for Vol. 9 Issue 2

March/April 2012

Volume 9, Issue 2

Pages 229–453

  1. Topical Section: Development of Si-based Ceramics and Technologies

    1. Top of page
    2. Topical Section: Development of Si-based Ceramics and Technologies
    3. General Section
    1. Effects of Impurity Oxygen Content in Raw Si Powder on Thermal and Mechanical Properties of Sintered Reaction-Bonded Silicon Nitrides (pages 229–238)

      Dai Kusano, Shigeru Adachi, Gen Tanabe, Hideki Hyuga, You Zhou and Kiyoshi Hirao

      Article first published online: 24 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02618.x

    2. Porous Si3N4 Ceramics Prepared via Nitridation of Si Powder with Si3N4 Filler and Postsintering (pages 239–245)

      Dongxu Yao, Yu-Ping Zeng, Kai-hui Zuo and Dongliang Jiang

      Article first published online: 28 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02627.x

    3. Slip Casting of a Si3N4-Based System (pages 246–258)

      Jan Hostaša, Laura Silvestroni, Andreana Piancastelli, Diletta Sciti, Daniela Di Martino and Laura Esposito

      Article first published online: 24 FEB 2012 | DOI: 10.1111/j.1744-7402.2011.02718.x

    4. Degradation of Silicon Nitride Glow Plugs in Various Environments. Part 2: Gas Burner Rig (pages 259–271)

      Carmen Oprea, Frankie Wong, Hamed Karimi Sharif, Colin Blair, Alan Welch and Tom Troczynski

      Article first published online: 29 JUN 2011 | DOI: 10.1111/j.1744-7402.2011.02663.x

    5. Degradation of Silicon Nitride Glow Plugs in Various Environments Part 3: NGDI Engine (pages 272–279)

      Carmen Oprea, Frankie Wong, Hamed Karimi Sharif, Colin Blair, Alan Welch and Tom Troczynski

      Article first published online: 30 DEC 2011 | DOI: 10.1111/j.1744-7402.2011.0202724.x

    6. Lifetime and Wear Behavior of Near Net Shaped Si3N4/SiC Wood Cutting Tools (pages 280–290)

      Claudia Strehler, Bruno Ehrle, Andreas Weinreich, Benjamin Kaiser, Thomas Graule, Christos G. Aneziris and Jakob Kuebler

      Article first published online: 8 MAR 2012 | DOI: 10.1111/j.1744-7402.2011.02690.x

    7. Fabrication of SiC Ceramics with Micropatterns from a Facile Replication Process (pages 304–312)

      Kuibao Zhang, Zhengyi Fu, Tadachika Nakayama, Masatoshi Okumura and Koichi Niihara

      Article first published online: 17 JAN 2012 | DOI: 10.1111/j.1744-7402.2011.02731.x

    8. SiC Ceramic-Bonded Carbon Fabricated With Si3N4 and Carbon Powders (pages 313–321)

      Weiwu Chen, Tetsuro Tojo and Yoshinari Miyamoto

      Article first published online: 8 MAR 2012 | DOI: 10.1111/j.1744-7402.2011.02677.x

    9. Prestress Scratching on SiC Ceramic (pages 322–328)

      Yuanqiang Tan, Shengqiang Jiang, Shijun Nie, Dongmin Yang, Gaofeng Zhang and Ruitao Peng

      Article first published online: 30 DEC 2011 | DOI: 10.1111/j.1744-7402.2011.0202726.x

  2. General Section

    1. Top of page
    2. Topical Section: Development of Si-based Ceramics and Technologies
    3. General Section
    1. Tape Casting of Al203, MgO, and MgAl2O4 for the Manufacture of Multilayer Composites for Refractory Applications (pages 329–340)

      Ingo Götschel, Yusuke Hayashi, Ken-ichi Kakimoto and Andreas Roosen

      Article first published online: 29 JUN 2011 | DOI: 10.1111/j.1744-7402.2011.02664.x

    2. Preparation and Properties of Er-Doped ZrO2 Nanocrystalline Phase-Separated Preforms of Optical Fibers by MCVD Process (pages 341–348)

      Anirban Dhar, Ivan Kasik, Bernard Dussardier, Ondrej Podrazky and Vlastimil Matejec

      Article first published online: 8 MAR 2012 | DOI: 10.1111/j.1744-7402.2011.02669.x

    3. ZrB2-Based Laminates Produced by Tape Casting (pages 349–357)

      Valentina Medri, Paola Pinasco, Alessandra Sanson, Edoardo Roncari, Stefano Guicciardi and Alida Bellosi

      Article first published online: 28 MAR 2011 | DOI: 10.1111/j.1744-7402.2011.02630.x

    4. Structural and Dielectric Studies of Nanocrystalline Calcium Substituted Magnesium Titanate Synthesized Through an Auto-Igniting Combustion Technique (pages 366–373)

      Madukayil Kunjoonju Suresh, Jijimon Kumpukattu Thomas, Hariharan Sreemoolanadhan, Chandy Nellimmoottil George, Annamma John, Sam Solomon, Palakkattumala Ramachandra Sobhana Wariar and Jacob Koshy

      Article first published online: 8 MAR 2012 | DOI: 10.1111/j.1744-7402.2011.02672.x

    5. The Solubility and Temperature Dependence of Resistivity for Aluminum-Doped Zinc Oxide Ceramic (pages 374–381)

      Yulong Zhang, Weiyan Wang, Ruiqin Tan, Ye Yang, Xianpeng Zhang, Ping Cui and Weijie Song

      Article first published online: 29 JUN 2011 | DOI: 10.1111/j.1744-7402.2011.02666.x

    6. The Defeat of Shaped Charge Jets by Explosively Driven Ceramic and Glass Plates (pages 382–392)

      Paul J. Hazell, Trevor Lawrence and Chris Stennett

      Article first published online: 7 JUN 2011 | DOI: 10.1111/j.1744-7402.2011.02656.x

    7. Mechanical Properties of Low-Density SiC-Coated Carbon-Bonded Carbon Fiber Composites (pages 401–412)

      Asher S. Ahmed, Zdenek Chlup, Ivo Dlouhy, Rees D. Rawlings and Aldo R. Boccaccini

      Article first published online: 29 JUN 2011 | DOI: 10.1111/j.1744-7402.2011.02658.x

    8. Dielectric and Mechanical Properties of Hot-Pressed Sintered Csf/Al2O3 Ceramic Composites (pages 413–420)

      Zhibin Huang, Wancheng Zhou, Rufei Ma, Xiufeng Tang, Fa Luo and Jiankun Zhu

      Article first published online: 8 MAR 2012 | DOI: 10.1111/j.1744-7402.2011.02673.x

    9. Ceramic Preforms with 2D Regular Channels for Fabrication of Metal/Ceramic-Reinforced Composites (pages 421–430)

      Osayande L. Ighodaro, Okenwa I. Okoli, Mei Zhang and Ben Wang

      Article first published online: 8 MAR 2012 | DOI: 10.1111/j.1744-7402.2011.02675.x

SEARCH

SEARCH BY CITATION