SEARCH

SEARCH BY CITATION

FilenameFormatSizeDescription
ina12122-sup-0001-FigureS1.pngPNG image124KFigure S1. Air is slightly cooled by the TLA device. Cooler air is more dense than surrounding air, and thus falls in an inverted plume over the breathing zone (blue arrows), thereby displacing airborne particles traveling into the breathing zone (red arrows) into a more peripheral location. This is a schematic, to aid understanding of the principles of TLA treatment. It does not represent the full complexity of air currents in the home; for example, air entrained into the overhead inverted plume is not shown.
ina12122-sup-0002-FigureS2.jpgimage/jpg359KFigure S2. Experimental set-up. A = nasal air sampler. B = sampling tubing for laser particle counter and IOM sampler.
ina12122-sup-0003-FigureS3.jpgimage/jpg34KFigure S3. The clean zone produced by the TLA device is defined by the volume of an imaginary cylinder below the air supply nozzle, with a diameter of about 60–80 cm and a height of 55 cm.
ina12122-sup-0004-SuppInfo.docxWord document533K 

Please note: Wiley Blackwell is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.