Get access

Yttria Hydroxy-Salt Binders



    1. Development Division, Oak Ridge Y-12 Plant, Nuclear Division, Union Carbide Corp., Oak Ridge, Tennessee 37830
    Search for more papers by this author
    • *

      Member, the American Ceramic Society.

  • Presented in part at the 79th Annual Meeting, The American Ceramic Society, Chicago, Illinois, April 25, 1977 (Refractories Division, No. 5-R-77).

  • Supported by the U.S. Department of Energy under Contract No. W-7405-eng-26.


Binder phase (primarily chloride or nitrate) formation was examined in YX3-NaOH-H2O, Y2O3-acid-H2O, and Y2O3-salt-H2-O systems. The cementitious phase consisted mostly of plate- (or needle-) shaped hydroxy salts of the general formula Y2(OH)6-m XmnH2O, where m and n normally equal one. These binders were examined by X-ray diffraction and thermal analysis techniques. Nitrate binders decompose to Y2O3 by 600°C, whereas chloride binders form oxychlorides that sublime or convert to Y2O3 after oxygen replacement of chlorine (in air) at >1000°C. Although nitric and hydrochloric acid solutions form porous (< 50% dense) plasterlike bodies in 2 to 10 min of reaction with Y2O3 powder, salt solutions (i.e. NH4NO3 Mg(NO3)2, NH4Cl, and YCl3- ∼6H2O) slow the reaction considerably (48 h to 4 weeks), allowing 70- to 80%-dense cements to form. The effects of formation conditions on physical properties of binders were studied. Examination of scandium and lanthanide oxides showed that several behave in the same way as yttria.

Get access to the full text of this article