SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    A. Maerten, P. Zaslansky, C. Mochales, T. Traykova, W.D. Mueller, P. Fratzl, C. Fleck, Characterizing the transformation near indents and cracks in clinically used dental yttria-stabilized zirconium oxide constructs, Dental Materials, 2013, 29, 2, 241

    CrossRef

  2. 2
    J.A. Muñoz-Tabares, E. Jiménez-Piqué, J. Reyes-Gasga, M. Anglada, Microstructural changes in ground 3Y-TZP and their effect on mechanical properties, Acta Materialia, 2011, 59, 17, 6670

    CrossRef

  3. 3
    A. L. Zharnyl’skaya, V. V. Vol’khin, H. Reuther, Effect of the nature of anions of aluminum salts used to synthesize a precursor of the Al2O3-ZrO2 ceramics on the stabilization of the tetragonal modification of zirconium dioxide, Russian Journal of Applied Chemistry, 2009, 82, 8, 1364

    CrossRef

  4. 4
    Junya Kondoh, Origin of the hump on the left shoulder of the X-ray diffraction peaks observed in Y2O3-fully and partially stabilized ZrO2, Journal of Alloys and Compounds, 2004, 375, 1-2, 270

    CrossRef

  5. 5
    R. Ramamoorthy, D. Sundararaman, S. Ramasamy, X-ray diffraction study of phase transformation in hydrolyzed zirconia nanoparticles, Journal of the European Ceramic Society, 1999, 19, 10, 1827

    CrossRef

  6. 6
    D. Kuščer, F. Dimc, J. Holc, M. Hrovat, S. Bernik, D. Kolar, Electrical and microstructural characterization of Al2O3 doped LaFeO3, Journal of Materials Science Letters, 1996, 15, 11, 974

    CrossRef

  7. 7
    V.S. Nagarajan, D.V.S. Muthu, S.A. Syed Asif, A.K. Sood, S.K. Biswas, Raman spectroscopic studies of phase transformations induced by a notch cut on a 3Y-TZP sample, Materials Science and Engineering: A, 1994, 174, 2, L37

    CrossRef

  8. 8
    C.A. Lewis, P.J. Withers, Reinforcement phase stability during ageing of an aluminium alloy/yttria-stabilised zirconia composite, Scripta Metallurgica et Materialia, 1993, 29, 9, 1189

    CrossRef

  9. 9
    Overview: Structural Ceramics,
  10. 10
    Toughness Optimization in Zirconia-Based Ceramics,