SEARCH

SEARCH BY CITATION

References

  • Banerjee, A. & Boyde, A. (1998) Autofluorescence and mineral content of carious dentine: scanning optical and backscattered electron microscopic studies. Caries Res. 32, 219226.
  • Boyde, A. (1978) Cutting teeth in the SEM. Scanning, 1, 157165.
  • Boyde, A. & Reid, S.A. (1986) 3-D analysis of tetracycline fluorescence in bone by tandem scanning reflected confocal microscopy. Bone, 7, 148149.
  • Boyde, A., Jones, S.J., Taylor, M.L., Wolfe, L.A. & Watson, T.F. (1990a) Fluorescence in the tandem scanning microscope. J. Microsc. 157, 3949.
  • Boyde, A., Dillon, C.E. & Jones, S.J. (1990b) Measurement of osteoclastic resorption pits with a Tandem Scanning Microscope. J. Microsc. 158, 261265.
  • Branemark, P.I., Breine, U., Adell, R., Hansson, N.O., Libndstrom, J. & Ohlsson, A. (1969) Intraosseous anchorage of dental prostheses. Scand. J. Plast. Reconstr. 3, 8189.
  • Browne, M.A., Akinyemi, O. & Boyde, A. (1992) Confocal surface profiling utilising chromatic aberration. Scanning, 14, 145153.
  • Callister, W. (1991) Mechanical properties of metals. Materials Science and Engineering, 2nd edn. pp. 113145. John Wiley & Sons, New York, U.S.A.
  • Cook, R.J. (2003) 58S Sol-gel bioglass: a study of osteoproductive, interfacial and handling properties using new microscopic techniques. PhD Thesis, University of London.
  • Cook, R.J., Azzopardi, A., Thompson, I.D. & Watson, T.F. (2001) Real-time confocal imaging, during active air-abrasion substrate cutting. J. Microsc. 203, 199207.
  • Davidge, R.W. (1980) The Mechanical Behaviour of Ceramics. Ch. II and III, pp. 1851. Cambridge University Press, Cambridge, U.K.
  • De Hoff, P., Anusavice, K.J. & Wang, Z. (1995) Three dimensional finite element analysis of the shear bond test. Dent. Mat. 11, 126131.
  • Donald, A.M. (2003) The use of environmental scanning electron microscopy for imaging wet and insulating materials. Nat. Mat. 8, 511516.
  • Donald, A.M., Baker, F.S., Smith, A.C. & Waldron, K.W. (2003) Fracture of plant tissues and walls as visualized by environmental scanning electron microscopy. Ann. Bot. 92, 7377.
  • Dusevich, V.M. & Eick, J.D. (2002) Evaluation of demineralized dentin contraction by stereo measurements using environmental and conventional scanning electron microscopy. Scanning, 24 (2), 101105.
  • Eliades, G. (1994) Clinical relevance of the formulation and testing of dentine bonding systems. J. Dent. 22, 7381.
  • Frost, H.M., Villanueva, A.R., Roth, H. & Stanisavljevic, S. (1961) Tetracycline bone labelling. J. New Drugs, 1, 206216.
  • Greenspan, D.C., Zhong, J.P., Chen, X.F. & LaTorre, G.P. (1997) The evaluation of degradability of melt and sol-gel derived Bioglass® in vitro. Bioceramics, Vol. 10, pp. 391394. Elsevier Science Ltd, Oxford, U.K.
  • Greenspan, D.C., Zhong, J.P. & Wheeler, D.L. (1998) Bioactivity and biodegradability: Melt vs. Sol-gel derived Bioglass® in vitro and in vivo. Bioceramics, 11, 345348.
  • Griffiths, B.M., Watson, T.F., Pagliari, D.E., Pileki, P. & Sherriff, M. (2000) Video rate confocal microscopic imaging of dentine. Adhesive interfacial failure under load. Am. J. Dent. 13, 271279.
  • Hayakawa, S., Shibata, K., Tsuru, K. & Osaka, A. (2002) Apatite induction on titania due to combined chemical and thermal treatments of titanium. Key Engineering Materials, Vol. 218−220, pp. 7174. Trans Tech Publications, Uetikon-Zuerich, Switzerland.
  • He, C. & Donald, A.M. (1997) Morphology of a deformed rubber toughened poly (methyl methacrylate) film under tensile strain. J. Mat. Sci. 32, 56615667.
  • Hench, L.L. (1998) Bioceramics; centennial feature. J. Am. Ceram. Soc. 81, 17051728.
  • Hench, L.L. & Paschall, H.A. (1973) Direct chemical bonding of bioactive glass-ceramic materials to bone and muscle. J. Biomed. Mat. Res. 7, 2542.
  • Hench, L.L. & West, J.K. (1990) The Sol-gel process. Chem. Rev. 90, 3372.
  • Hench, L.L. & Wilson, J. (1993) An Introduction to Bioceramics. World Scientific, London, U.K.
  • Hench, L.L., Splinter, R.J., Allen, W.C. & Greenlee, T.K. Jr (1971) Bonding mechanisms at the interface of ceramic prosthetic materials. J. Biomed. Mat. Res. 2, 117141.
  • Inglis, C.E. (1913) Stresses in a plate due to the presence of cracks and sharp corners. Trans. Inst. Nav. Archit. 55, 219227.
  • Kaneko, S., Takemoto, S., Ohtsuki, C., Ozaki, T., Inoue, H. & Osaka, A. (2001) Bone bonding ability of Ti-6Al-4V alloy treated with a hydrogen peroxide solution. Bioceramics, Vol. 12, pp. 295298 World Scientific Publications, Singapore.
  • Katona, T.R. (1994) The effects of load location and mis-alignment on shear/peel testing of direct bonded orthodontic brackets − a finite element model. Am. J. Orthod. Dentofac. Orthop. 106, 395402.
  • Kelly, J.R. (1995) Perspectives on strength. Dent. Mat. 11, 103110.
  • Li, P. & De Groot, K. (1993) Calcium phosphate formation within sol-gel prepared titania in vitro and in vivo. J. Biomed. Mat. Res. 27, 14951500.
  • Liu, D., Wagner, H.D. & Weiner, S. (2000) Bending and fracture of compact circumferential and osteonal lamellar bone of the baboon tibia. J. Mat. Sci. Mat. Med. 11, 4960.
  • Manero, J.M., Gil, F.J., Padros, E. & Planell, J.A. (2003) Applications of environmental scanning electron microscopy (ESEM) in biomaterials field. Microsc. Res. Techn. 61, 469480.
  • Molin, M.K., Karlsson, S.L. & Kristiansen, M.S. (1996) Influence of film thickness on joint bond strength of a ceramic/resin composite joint. Dent. Mat. 12, 245249.
  • Moroni, A., Caja, V.L., Maltarello, M.C. et al. (1997) Biomechanical, scanning EM and micro-hardness analyses of the bone pin interface in Hydroxyapatite coated versus uncoated pins. J. Orthop. Trauma, 11, 154161.
  • Mott, L., Shaler, S.M., Groom, L.H. & Liang, B.-H. (1995) The tensile testing of individual wood fibers using environmental scanning electron microscopy and video image analysis. Techn. Assoc. Pulp Paper Industry J. 78, 143148.
  • Mott, L., Shaler, S.M. & Groom, L.H. (1996) A technique to measure strain distributions in single wood pulp fibers. Wood Fiber Sci. 28, 429437.
  • Nakajima, M., Sano, H., Burrow, M.F. et al. (1995) Tensile bond strength and SEM evaluation of caries affected dentin using dentin adhesives. J. Dent. Res. 71, 16791688.
  • Niki, M., Matsuda, I.T. & Ogino, M. (1991) Comparative push-out data of bioactive and non bioactive materials of similar rugosity. The Bone–Biomaterials Interface (ed. by J.Davies), pp. 350356. University of Toronto Press, Toronto, Canada.
  • Oilo, G. (1993) Bond strength testing − what does it mean? Int. Dent. J. 43, 492498.
  • Osaka, A., Wang, X.X., Hayakawa, S. & Tsuru, K. (2001) Biomimetic deposition of apatite on electrochemically oxidised titanium substrates. Key Engineering Materials, Vol. 192−195, pp. 263266. Trans Tech Publications, Uetikon-Zuerich, Switzerland.
  • Pashley, D.H., Sano, H., Ciucchi, B., Yoshiyama, M. & Carvalho, R.M. (1995) Adhesion testing of dentine bonding agents: a review. Dent. Mat. 11, 117125.
  • Porter, A.E., Patel, N., Skepper, J.N., Best, S.M. & Bonfield, W. (2004) Effect of sintered silicate-substituted hydroxyapatite on remodelling processes at the bone–implant interface. Biomaterials, 16, 33033314.
  • Sano, H., Shono, T., Sonoda, H., Takatsu, T., Ciucchi, B., Carvalho, R.M. & Pashley, D.H. (1994) Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent. Mat. 10, 236240.
  • Shapiro, I.M. & Boyde, A. (1984) Microdissection − elemental analysis of the mineralizing growth cartilage of the normal and rachitic chick. Metab. Bone Dis. Relat. Res. 5 (6), 317326.
  • Shiraz-Adl, A. (1992) Finite stress analysis of a push out test. Part 1: fixed interface using stress compatible elements. J. Biomech. Eng. 114, 111118.
  • Sidhu, S.K. & Watson, T.F. (1999) Failure of resin-modified glass-ionomers subjected to shear loading. J. Dent. 27, 373381.
  • Sinhoreti, M.A.C., Cosani, S., Sobrinho, L.C. & Knowles, J.C. (2001) Influence of loading type on the shear strength of the dentine − resin interface bonding. J. Mat. Sci. Mat. Med. 12, 3944.
  • Skripitz, R. & Aspenberg, P. (1999) Attachment of PMMA cement to bone: force measurements in rats. Biomaterials, 20, 351356.
  • Soderholm, K.J.M. (1991) Correlation of in vivo and in vitro performance of adhesive restorative materials: a report of the ASC MD 156 task group on test methods for the adhesion of restorative materials. Dent. Mat. 7, 7483.
  • Strang, R., Whitters, C.J., Brown, D. et al. (1996) Dental materials 1996. Lit. Rev. J. Dent. 26, 191207.
  • Thiel, B.L. & Donald, A.M. (1998) In-situ mechanical testing of fully hydrated carrots (Daucus carota L.) in the environmental SEM. Ann. Bot. 82, 727733.
  • Thiel, B.L. & Donald, A.M. (1999) Microstructural failure mechanisms in cooked and aged carrots. J. Text. Stud. 31, 437455.
  • Thomas, V. & Wollenden, A. (1998) A tensile stage to study thin polymer films in an environmental scanning electron microscope. Rev. Sci. Instr. 69, 463465.
  • Thompson, J.I., Gregso, P.J. & Revell, P.A. (1999) Analysis of push out test data based on interfacial fracture energy. J. Mat. Sci. Mat. Med. 10, 863868.
  • Van Noort, R., Noroozi, S., Howard, I.C. & Cardew, G. (1989) A critique of bond strength measurements. J. Dent. 17, 6167.
  • Van Noort, R., Cardew, G.E., Howard, I.C. & Noroozi, S. (1991) The effect of local geometry on the measurement of the tensile bond strength to dentine. J. Dent. Res. 70, 889893.
  • Versluis, A., Tantbirojn, D. & Douglas, W.H. (1997) Why do shear bond tests pull out dentine? J. Dent. Res. 76, 12981307.
  • Watson, T.F. (1990) The application of real-time confocal microscopy to the study of high-speed dental bur tooth cutting interactions. J. Microsc. 157, 5160.
  • Watson, T.F. (1994) Applications of high speed confocal imaging techniques in operative dentistry. Scanning, 16, 168173.
  • Watson, T.F. & Boyde, A. (1987) Tandem scanning reflected light microscopy: Applications in clinical dental research. Scann. Microsc. Int. 1 (4), 19711981.
  • Watson, T.F. & Cook, R.J. (1995) The influence of bur concentricity on high speed tooth cutting interactions: a confocal microscopic study. J. Dent. Res. 74, 17491755.
  • Watson, T.F., Flanagan, D. & Stone, D. (2000) High and low torque handpieces. Cutting dynamics, enamel cracking and tooth temperature. Br. Dent. J. 188, 680686.
  • Watson, T.F., Cook, R.J. & Azzopardi, A. (2001) Observing airbrasive cutting of dental biomaterials using confocal microscopy. J. Dent. Res. 80, 693 (Abstract).
  • Xynos, I.D., Edgar, A.J., Buttery, L.D.K., Hench, L.L. & Polak, J.M. (2000a) Ionic products of bioactive glass dissolution increase proliferation of human osteoblasts and induce human insulin-like growth factor II m-RNA expression and protein synthesis. Biochem. Biophys. Res. Comm. 276, 461465.
  • Xynos, I.D., Hukkannen, M.V.J., Batten, J.J., Buttery, L.D.K., Hench, L.L. & Polak, J.M. (2000b) Bioglass® 45S5 stimulates osteoblast turnover and enhances bone formation in vitro: implications and applications for bone tissue engineering. Calcif. Tiss. Int. 67, 321329.
  • Xynos, I.D., Edgar, A.J., Buttery, L.D.K., Hench, L.L. & Polak, J.M. (2001) Gene expression profiling of human osteoblasts following treatment with the ionic products of Bioglass® 45S5 dissolution. J. Biomed. Mat. Res. 55, 151157.