SEARCH

SEARCH BY CITATION

References

  • Andrews, E.W., Gioux, G., Onck, P.R. & Gibson, L.J. (2001) Size effects in ductile cellular solids. Part II: experimental results. Int. J. Mech. Sci. 43, 701713.
  • Andrews, E.W., Sanders, W. & Gibson, L.J. (1999) Compressive and tensile behaviour of aluminium foams. Mater. Sci. Eng., A. 270, 113124.
  • Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchinson, J.W. & Wadley, H.N.G. (2000) Metal Foams: a Design Guide, pp. 623. Butterworth-Heinemann, Oxford.
  • Bart-Smith, H., Bastawros, A.-F., Mumm, D.R., Evans, A.G., Sypeck, D.J. & Wadley, H.N.G. (1998) Compressive deformation and yielding mechanisms in cellular Al alloys determined using X-ray tomography and surface strain mapping. Acta Mater. 46, 35833592.
  • Baumeister, J., Banhart, J. & Weber, M. (1997) Aluminium foams for the transport industry. Mater. Des. 18, 217220.
  • Beals, J.T. & Thompson, M.S. (1997) Density gradient effects on aluminium foam compression behaviour. J. Mater. Sci. 32, 35953600.
  • Brunke, O., Odenbach, S. & Beckmann, F. (2005) Quantitative methods for the analysis of synchrotron-µCT datasets of metallic foams. Eur. Phys. J. Appl. Phys. 29, 7381.
  • Davies, G.J. & Zhen, S. (1983) Metallic foams: their production, properties, and applications. J. Mater. Sci. 18, 18991911.
  • Degischer, H.P., Kottar, A. & Foroughi, B. (2000) Determination of local mass density distribution. X-Ray Tomography in Materials Science (ed. by Baruchel, J., Buffière, J.-Y., Maire, E., Merle, P. and Peix, G.), pp. 165176. HERMES Science Publications, Paris.
  • Dillard, T., N’Guyen, F., Maire, E., Salvo, L., Forest, S., Bienvenu, Y., Bartout, J.-D., Croset, M. et al. (2005) 3D quantitative image analysis of open-cell nickel foams under tension and compression loading using X-ray microtomography. Philos. Mag. 85, 21472175.
  • Elmoutaouakkil, A., Salvo, L., Maire, E. & Peix, G. (2002) 2D and 3D characterization of metal foams using X-ray tomography. Adv. Eng. Mater. 4, 803807.
  • Evans, A.G. & Hutchinson, J.W. (1999) Multifunctionality of cellular metal systems. Metal Foams and Porous Metal Structures (ed. by Banhart, J., Ashby, M. and Fleck, N.), pp. 4556. MIT-Publishing, Bremen.
  • Fazekas, A., Dendievel, R., Salvo, L. & Brèchet, Y. (2002) Effect of microstructural topology upon the stiffness and strength of 2-D cellular structures. Int. J. Mech. Sci. 44, 20472066.
  • Feldkamp, L.A., Davis, L.C. & Kress, J.W. (1984) Practical cone-beam algorithm. J. Opt. Soc. Am. 1, 612619.
  • Gibson, L.J. & Ashby, M.F. (1997) Cellular Solids: Structure and Properties, 2nd edn. Cambridge University Press, Cambridge.
  • Gradinger, R. & Rammerstorfer, F.G. (1999) On the influence of meso-inhomogeneities on the crush worthiness of metal foams. Acta Mater. 47, 143148.
  • Grenestedt, J.L. (1998) Influence of wavy imperfections in cell walls on elastic stiffness of cellular solids. J. Mech. Phys. Solids, 46, 2950.
  • Kriszt, B., Foroughi, B., Faure, K. & Degischer, H.P. (2000) Behaviour of aluminium foam under uniaxial compression. Mater. Sci. Technol. 16, 792796.
  • Kunze, H.D., Baumeister, J., Banhart, J. & Weber, M. (1993) PM technology in the production of metal foams. Powder Metall. Int. 25, 182185.
  • Olurin, O.B., Arnold, M., Korner, C. & Singer, R.F. (2002) The investigation of morphometric parameters of aluminium foams using micro-computed tomography. Mater. Sci. Eng., A, 328, 334343.
  • Onck, P.R., Andrews, E.W. & Gibson, L.J. (2001) Size effects in ductile cellular solids. Part I: Modelling. Int. J. Mech. Sci. 43, 681699.
  • Serra, J. (1982) Image Analysis and Mathematical Morphology. Academic Press, London.
  • Silva, M.J. & Gibson, L.J. (1997) The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids. Int. J. Mech. Sci. 39, 549563.
  • Silva, M.J., Gibson, L.J. & Hayes, W.C. (1995) The effects of non-periodic microstructure on the elastic properties of two-dimensional cellular solids. Int. J. Mech. Sci. 37, 11611177.
  • Simone, A.E. & Gibson, L.J. (1998a) The effects of cell face curvature and corrugations on the stiffness and strength of metallic foams. Acta Mater. 46, 39293935.
  • Simone, A.E. & Gibson, L.J. (1998b) Effects of solid distribution on the stiffness and strength of metallic foams. Acta Mater. 46, 21392150.
  • Simone, A.E. & Gibson, L.J. (1998c) Aluminium foams produced by liquid-state processes. Acta Mater. 46, 31093123.
  • Sugimura, Y., Meyer, J., He, M.Y., Bart-Smith, H., Grenestedt, J. & Evans, A.G. (1997) On the mechanical performance of closed cell foams. Acta Mater. 45, 52455259.
  • Thornton, P.H. & Magee, C.L. (1975) The deformation of aluminium foams. Metall. Trans A, 6, 12531263.
  • Warren, W.E. & Kraynik, A.M. (1988) The linear elastic properties of open-cell foams. J. Appl. Mech. 55, 341346.