• Dillon, S.J., Helmick, L., Miller, H.M., et al . (2011) The orientation distributions of lines, surfaces, and interfaces around three-phase boundaries in solid oxide fuel cell cathodes RID A-9804–2008 RID A-9420–2008. J. Am. Ceram. Soc. 94, 40454051.
  • Dillon, S.J. & Rohrer, G.S. (2009) Three-dimensional FIB-OIM of ceramic materials. Applications of Texture Analysis (ed. by A.D. Rollett), pp. 117124. J. Wiley & Sons, Hoboken , NJ .
  • Drouin, D., Couture, A.R., Joly, D., Tastet, X., Aimez, V. & Gauvin, R. (2007) CASINO V2.42-A fast and easy-to-use modeling tool for scanning electron microscopy and microanalysis users. Scanning 29, 92–101.
  • Giannuzzi, L.A. (2005) Introduction to Focused Ion Beams : Instrumentation, Theory, Techniques, and Practice. Springer, New York .
  • Hattori, M., Takeda, Y., Sakaki, Y., Nakanishi, A., Ohara, S., Mukai, K., Lee, J. & Fukui, T. (2004) Effect of aging on conductivity of yttria stabilized Zirconia. J. Power Sources 126, 2327.
  • Helmick, L., Dillon, S.J., Gerdes, K., Gemmen, R., Rohrer, G.S., Seetharaman, S. & Salvador, P.A. (2011) Crystallographic characteristics of grain boundaries in dense yttria-stabilized zirconia RID A-9420–2008. Int. J. Appl. Ceram. Technol. 8, 12181228.
  • Leshchenko, P., Shevchenko, A., Lykova, L., Kovba, L. & Ippolitova, E. (1982) The system Sro-Nb2o5. Inorg. Mater. 18, 10131016.
  • Maitland, T. & Sitzman, S. (2007) Scanning microscopy for nanotechnology [electronic resource]: techniques and applications. Physica-Verlag NetLibrary, Incorporated [Distributor] (ed. by W. Zhou & Z.L. Wang). p. 53. Heidelberg , Boulder .
  • Mateescu, N., Ferry, M., Xu, W. & Cairney, J.M. (2007) Some factors affecting EBSD pattern quality of Ga +ion-milled face centred cubic metal surfaces. Mater. Chem. Phys. 106, 142148.
  • Matteson, T.L., Schwarz, S.W., Houge, E.C., Kempshall, B.W. & Giannuzzi, L.A. (2002) Electron backscattering diffraction investigation of focused ion beam surfaces. J. Electron. Mater. 31, 3339.
  • Michael, J. & Giannuzzi, L. (2007) Improved EBSD sample preparation via low energy Ga+ FIB ion milling. Microsc. Microanal. 13, 926.
  • Michael, J. & Kotula, P. (2008) Low energy Ga+ and Ar+ ion milling for improved EBSD sample preparation. Microsc. Microanal. 14, 976.
  • Randle, V. & Engler, O. (2000) Introduction to Texture Analysis Macrotexture, Microtexture and Orientation Mapping. CRC Press LLC, Boca Raton, FL.
  • Rubanov, S. & Munroe, P.R. (2005) Damage in III-V compounds during focused ion beam milling. Microsc. Microanal. 11, 446455.
  • Singhal, S.C & Kendall, K . (2003) High-Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications. Elsevier Advanced Technology, Oxford .
  • Schwartz, A.J. (2009) Electron Backscatter Diffraction in Materials Science. Springer Science Business Media, New York , NY .
  • Wilkinson, A.J. & Dingley, D.J. (1991) Quantitative deformation studies using electron back scatter patterns. Acta Metallurgica Et Materialia 39, 30473055.
  • Yokokawa, H., Sakai, N., Horita, T., et al . (2001) Phase diagram calculations of ZrO2-based ceramics with an emphasis on the reduction/oxidation equilibria of cerium ions in the ZrO2-YO1.5-CeO2-CeO1.5 system. J. Phase Equilib. 22, 331338.
  • Zaefferer, S., Wright, S.I. & Raabe, D. (2008) Three-dimensional orientation microscopy in a focused ion beam-scanning electron microscope: a new dimension of microstructure characterization. Metall. Mater. Trans. A-Phy. Metall. Mater. Sci. 39A, 374389.
  • Ziegler, J.F., Ziegler, M.D. & Biersack, J.P. (2010) SRIM–The stopping and range of ions in matter (2010) Nucl Instrum Methods Phys Res B, 268, 18181823.