Notice: Wiley Online Library will be unavailable on Saturday 30th July 2016 from 08:00-11:00 BST / 03:00-06:00 EST / 15:00-18:00 SGT for essential maintenance. Apologies for the inconvenience.
Stromules are motile extensions of the plastid envelope membrane, whose roles are not fully understood. They are present on all plastid types but are more common and extensive on non-green plastids that are sparsely distributed within the cell. During tomato fruit ripening, chloroplasts in the mesocarp tissue differentiate into chromoplasts and undergo major shifts in morphology. In order to understand what factors regulate stromule formation, we analysed stromule biogenesis in tobacco hypocotyls and in two distinct plastid populations in tomato mesocarp. We show that increases in stromule length and frequency are correlated with chromoplast differentiation, but only in one plastid population where the plastids are larger and less numerous. We used tobacco hypocotyls to confirm that stromule length increases as plastids become further apart, suggesting that stromules optimize the plastid–cytoplasm contact area. Furthermore, we demonstrate that ectopic chloroplast components decrease stromule formation on tomato fruit chromoplasts, whereas preventing chloroplast development leads to increased numbers of stromules. Inhibition of fruit ripening has a dramatic impact on plastid and stromule morphology, underlining that plastid differentiation status, and not cell type, is a significant factor in determining the extent of plastid stromules. By modifying the plastid surface area, we propose that stromules enhance the specific metabolic activities of plastids.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.
Plastids are a family of interrelated organelles that assume various forms, such as chloroplasts, chromoplasts and amyloplasts, each with specialized roles and appearances which have formed the basis for their traditional classification (Waters and Pyke, 2004). In addition to photosynthesis, plastids are involved in numerous metabolic pathways including nitrate assimilation, starch metabolism and fatty acid biosynthesis (Neuhaus and Emes, 2000) and thus are integral to plant cell functionality. Recently, green fluorescent protein (GFP) and confocal microscopy has allowed the in vivo dynamics of subcellular organelles to be followed, providing a new approach to elucidate the complexities of plant cells (Hanson and Köhler, 2001; Hawes et al., 2001; Köhler, 1998). The general view that plastids are separate, distinct cytoplasmic organelles was challenged following the expression of GFP targeted to the plastid stroma in tobacco and petunia plants. This revealed the presence of motile, thin protrusions, emanating from the plastid surface into the surrounding cytoplasm (Köhler et al., 1997). These protrusions, now known as stromules (stroma-filled tubules), sometimes link individual plastids and allow them to exchange macromolecules (Kwok and Hanson, 2004a). Although evidence of such plastid shape dynamics has been reported sporadically in the past (Gray et al., 2001), modern microscopy techniques coupled with GFP have allowed the reliable study of the motile nature of both pigmented and non-pigmented plastids in a wide variety of plant species. Since their initial re-discovery (Köhler et al., 1997), stromules have been reported in several angiosperm species including Arabidopsis (Hibberd et al., 1998; Tirlapur et al., 1998), wheat (Langeveld et al., 2000), rice (Bourett et al., 1999) and tomato (Pyke and Howells, 2002). An overview of plastid morphology in various tobacco cell types revealed that stromules are distributed in a tissue-specific manner, with an emergent trend that stromules are most abundant on non-green plastids such as those found in roots and cultured suspension cells (Köhler and Hanson, 2000). Conversely, chloroplasts such as those in leaf mesophyll cells exhibit few stromules, and these tend to be short and ephemeral in nature. However, such observations suffer from the problem of confounding factors, as non-green plastids are often present at lower numbers within the cell and are frequently smaller; in these cells stromules might help increase the surface area for plastid–cytoplasm contact. Furthermore, cellular differentiation, in conjunction with plastid differentiation, may also influence stromule biogenesis.
Chromoplasts are a class of plastids specialized in the synthesis and accumulation of coloured carotenoids (Camara et al., 1995). In tomato fruit, chloroplasts differentiate into chromoplasts upon the initiation of ripening, a process which occurs over about 7 days (Fraser et al., 1994). Chlorophyll is degraded and carotenoids such as β-carotene and lycopene are deposited in membranous inclusions within the developing chromoplast (Cheung et al., 1993; Harris and Spurr, 1969). While the biochemistry of chromoplasts has been studied extensively (Camara et al., 1995), the cell biology and population dynamics of chromoplasts have received little attention. This is surprising, given the many attempts to improve the nutritional value of tomatoes by modifying their carotenoid content (Bramley, 1997; Römer et al., 2000). Analysis of plastid division in tomato fruit revealed that the majority of plastid division occurs during the fruit enlargement stages when the plastids are present as chloroplasts, such that plastid number remains fairly constant once ripening commences (Cookson et al., 2003). In terms of chromoplast morphology, we showed previously that although stromules are relatively rare on chloroplasts in green fruit, they frequently form highly complex structures that appear to interlink individual chromoplasts in ripe fruit (Pyke and Howells, 2002).
To understand the functions of stromules and the reasons underpinning their variability, it is necessary to document the changes in stromule morphology that occur during the process of plastid differentiation both within and between different cell types, as both plastid type and cell type might influence stromule biogenesis. The tomato fruit represents a good system for studying stromules because (i) there is a well-defined plastid transition from the chloroplast to chromoplast; (ii) tomato fruit is composed of several different cell types that undergo the same plastid differentiation process; and (iii) there exist several mutants of tomato that alter various aspects of the fruit ripening process and the plastid differentiation pathway. In this study we show that stromule abundance increases following the chloroplast to chromoplast transition but only in cells where plastids are large and further apart. This induction is prevented in a ripening-deficient mutant where plastid development is blocked. We investigate the influence of a chloroplast-like environment on stromule formation, and demonstrate that there is a negative correlation between the retention of chloroplast components and stromule abundance. Finally, we confirm using tobacco seedlings that stromule formation is dependent on the number of plastids per unit area of the cell. We propose that there are multiple, interacting factors which determine the frequency and extent of stromules in plant cells, and that the abundance of stromules in ripe tomato fruit may be a significant feature of chromoplast activities.
Two distinct plastid populations exist in the mesocarp of tomato fruit
Developing tomato fruit can be classified according to size and colour. The four stages we consider here cover the transition from chloroplast to chromoplast in a mature (i.e. full-sized) fruit. At mature green (MG), fruit enlargement has ceased. Breaker (B) marks the initiation of ripening when the first colour change becomes apparent; all subsequent stages are defined as days post-breaker (i.e. B + 1, B + 3, B + 7; Figure 1a). By B + 7 an ‘Ailsa Craig’ tomato fruit is ripe, with almost maximal levels of carotenoids and little or no remnant chlorophyll (Fraser et al., 1994). The pericarp of tomato fruit consists of a thick layer of large, vacuolated cells immediately beneath the epidermis, and has three distinct sub-regions: the exocarp, the mesocarp and the endocarp (Gillaspy et al., 1993; Figure 1b). The exocarp is composed of two to three layers of parenchymatous cells. Internal to this are several layers of large mesocarp cells that make up the majority of the pericarp, within which is found an apical-basal vascular system, distributed throughout the fruit in a regular manner rather like the lines of longitude on a globe. The innermost region, the endocarp, is a single layer of cells that lines the locules where the seeds develop. Inspection of whole pericarp sections from MG fruit expressing the stroma-targeted GFP construct reveals that the vasculature appears to delineate two distinct cell types within the mesocarp itself (Figure 1b).
In MG fruit, the mesocarp cells outermost to the vasculature (outer mesocarp or OM cells) possess small, numerous chloroplasts, whereas those towards the interior of the fruit (inner mesocarp or IM cells) contain large, starch-filled plastids that are fewer in number (as indicated by staining with potassium iodide/iodine solution; data not shown and Figure 2). This plastid dimorphism is maintained throughout the fruit ripening process with major differences in plastid size, morphology and number per unit area (Figure 2; Table 1). In ripe fruit (B + 7), the chromoplasts in OM and IM cells are highly distinct. In OM cells, chromoplasts often take on an oblong, needle-like appearance (Figure 2g), whereas IM-cell chromoplasts are much larger and ovoid in shape (Figure 2h). The different cell populations and stages of fruit ripening are also associated with dramatic shifts in stromule morphology. In MG fruit, stromules in IM cells tend to be much longer and conspicuous than those in OM cells (Figure 2, insets). Stromules in MG OM cells are often stubby and do not protrude far into the cytoplasm, with a mean length of 5.6 μm (Table 1). These are reminiscent of stromules found on chloroplasts in tissues such as mesophyll cells and trichomes (data not shown). However, stromules in IM cells of MG fruit can be extremely long, with a mean length of 13.5 μm (Table 1). These OM–IM cell differences are maintained at all stages, but the distinction is most pronounced once ripening commences (Figure 2, insets). Stromules are longest in IM cells from B + 7 fruit, and there is often more than one stromule per chromoplast in this cell type (Figure 2h). In addition, IM cells frequently show variably sized vesicles that are not directly associated with plastids or stromules, and which contain GFP but not chlorophyll (Figure 2). We suspect that these vesicles may be formed following the collapse of long stromules, as OM cells (with short stromules) do not possess them. It should also be noted that IM cell plastids from MG, B + 1 and B + 3 fruit show considerable intracellular variability in size (Table 1; Figure 2). This may be caused by rapid mobilization of starch reserves that commences just prior to breaker and proceeds through ripening (Büker et al., 1998). Furthermore, the changes in plastid morphology may be compounded by incomplete thylakoid degradation and varying degrees of plastid differentiation. Such metabolic and developmental events are presumably not simultaneous throughout the fruit or even within a cell, leaving a heterogeneous population of plastids of different sizes and differentiation status.
Table 1. Stromule abundance, plastid size and plastid index in tomato fruit mesocarp cells
Mean stromule frequency (%)b
Mean stromule length (μm)c
Max stromule length (μm)d
Mean plastid plan area (μm2)e
Plastid index (plastids per 10 000 μm2)f
aNumber of cells used to calculate stromule index.
bMean proportion of plastids with stromules from n cells.
cMean ± 1 SE of measurements from at least five stromules from each of the n cells.
dMaximum stromule length across all n cells.
eMean ± 1 SE of measurements from five plastids from each of the n cells.
fMean ± 1 SE of measurements from n cells.
5.6 ± 0.3
24.0 ± 1.2
27.2 ± 2.6
13.5 ± 1.2
49.0 ± 3.2
17.2 ± 1.3
B + 1
4.8 ± 0.5
20.2 ± 1.3
29.8 ± 2.4
31.7 ± 3.2
38.1 ± 2.6
11.6 ± 1.5
B + 3
11.1 ± 1.2
22.8 ± 1.3
20.7 ± 2.6
37.6 ± 3.8
42.9 ± 2.8
10.7 ± 1.6
B + 7
5.8 ± 0.6
19.6 ± 1.1
32.9 ± 2.9
32.6 ± 1.9
40.7 ± 1.8
12.7 ± 1.4
WT [dark grown]
4.7 ± 0.5
17.4 ± 0.9
18.6 ± 1.1
11.3 ± 1.8
52.0 ± 4.3
11.7 ± 1.3
B + 7
6.2 ± 0.8
21.0 ± 1.1
30.6 ± 2.6
39.2 ± 2.9
54.9 ± 3.6
7.0 ± 2.8
∼B + 40
2.4 ± 0.1
10.4 ± 0.2
45.4 ± 7.1
2.7 ± 0.1
12.9 ± 0.3
41.1 ± 7.2
Stromule frequency and length varies with plastid size and type
To investigate further how stromule abundance changes during ripening, we measured the stromule frequency (i.e. the proportion of plastids with stromules) and stromule length in both OM and IM cells at each of the four stages of wild type fruit development. Stromule frequency is expressed as ‘stromule index’ for quantification (see Experimental procedures). In addition, other parameters such as plastid size and plastids per unit area (a measure of plastid density within the cell; hereafter termed ‘plastid index’) were determined (Table 1).
The stromule index is significantly lower in OM cells than in IM cells at all stages post-breaker (Mann–Whitney rank sum test, P > 0.05; Figure 3a), except in the case of MG fruit where there is no significant difference. The pattern of stromule index as ripening progresses differs between each of the two cell types. In OM cells, stromule index remains approximately constant throughout fruit development with only small changes. However, in IM cells there is a large and significant increase in stromule frequency upon the initiation of ripening, that is between MG and B + 1, where the proportion of plastids with stromules rises from 7 to 32%, respectively (Mann–Whitney, P < 0.001; Figure 3a and Table 1). After the B + 1 stage, stromule frequency in IM cells remains high and approximately constant with no significant change. From these data we infer that there is a dramatic increase in stromule frequency during the differentiation of chloroplasts to chromoplasts, but that this change is IM cell-specific.
Stromule length also varies between both cell types during fruit development. In OM cells, stromule length remains constant across all fruit stages, although there appears to be a transitory and significant increase at B + 3 (Mann–Whitney, P < 0.001; Figure 3b). This may be caused by plastids in fruit of this stage being intermediate between chloroplast and chromoplast, leading to discrepancies in plastid morphology that are typical of neither the mature chloroplast nor chromoplast. However, in IM cells stromule length is consistently and significantly higher than in the corresponding OM cells at all stages of fruit development considered (Figure 3b). Furthermore, there is an increase in stromule length upon the transition from MG to B + 1, and still a further increase between B + 1 and B + 7 (Mann–Whitney, P < 0.001 and P = 0.02, respectively; Figure 3b). This suggests that the transition from chloroplast to chromoplast correlates with increased stromule length but only in IM cells.
The green flesh mutation reduces stromule frequency in IM cells of ripe fruit
As chloroplasts generally produce fewer and shorter stromules than non-green plastid types (Gray et al., 2001; Köhler and Hanson, 2000), we hypothesized that experimentally maintaining a chloroplast-like plastid status might inhibit stromule formation in ripe fruit mesocarp cells. To test this, we introduced the plastid-targeted GFP construct into the green flesh (gf) mutant background. This mutant is deficient in the removal of chlorophyll and thylakoid complexes from the developing chromoplast (Cheung et al., 1993) as well as from chloroplasts in senescing leaves (Akhtar et al., 1999). In wild type fruit, the photosynthetic apparatus is removed from the chloroplast upon ripening. In gf this process takes very much longer: by B + 7 both carotenoids and chlorophyll are present in the pericarp plastids, resulting in a dirty-red fruit colour (Figure 4c, e). Plastids in such fruit thus possess properties of both chloroplasts and chromoplasts (Cheung et al., 1993).
At B + 7, stromules in gf fruit appear similar to wild type, being rare in OM cells but relatively common and extensive in IM cells (Figure 4a, b). However, quantitative measurements revealed that the mutation has mixed effects on both stromule index and length. Stromules are more rare in IM cells of gf B + 7 fruit than in wild type (27% versus 39% of plastids possess stromules, respectively; Table 1 and Figure 4f), and this difference, although small, is significant (Mann–Whitney, P = 0.02). The effect on stromule index in OM cells is apparently the opposite (Figure 4f), but this difference is not significant (P = 0.15). In terms of stromule length, there are no significant differences between gf and wild type in either OM or IM cells (Figure 4g). Furthermore, parameters such as mean and maximum stromule length remain much the same in gf as in wild type (Table 1). It is notable that both the physical appearance of plastids and stromules, as well as the frequencies and lengths of stromules from gf fruit, are comparable with those obtained from ripening wild type fruit (compare, for example, Figure 2d with Figure 4b): in both of these situations plastid differentiation is incomplete, with morphologies intermediate between chloroplast and chromoplast. Collectively, these findings suggest that maintaining the chloroplast state reduces the tendency for stromule formation.
Inhibiting chloroplast development increases stromule frequency in a cell type-specific manner
To address further the effects of the chloroplast state on stromule formation, we inhibited chloroplast differentiation by preventing light from reaching the post-fertilization flower. This blocks chloroplast differentiation, resulting in a white fruit that is morphologically normal when compared with light-grown fruit at the equivalent MG stage (Figure 5c). Fruit grown in this way will develop as normal and ripen fully, suggesting that the light signal is not required for chromoplast differentiation (data not shown). A large induction in stromule frequency relative to light-grown fruit was observed in OM cells of dark-grown fruit (Figure 5a), but this difference was not so apparent in IM cells in which the plastids retained their large, starchy appearance with few, relatively long stromules (Figure 5b). Image analysis confirmed this observation: within OM cells, stromule index was significantly higher in dark-grown than light-grown fruit (Mann–Whitney, P = 0.007), but not different in IM cells (P = 0.07; Figure 5d). Stromule length in IM cells did not vary significantly between the two treatments (P = 0.39) and, surprisingly, there was no significant difference in stromule lengths in OM cells between dark and light-grown fruit (P = 0.22; Figure 5e). From these data we conclude that preventing chloroplast differentiation leads to more stromules, but that this can be modulated by other factors, as IM cell plastids in MG fruit retain their morphological characteristics whether or not they are chloroplastic.
The rin mutation dramatically decreases stromule abundance in tomato fruit
Whereas the gf mutation affects only a specific aspect of fruit ripening, the ripening inhibitor (rin) mutation disrupts ripening in a more global fashion. rin fruit develop normally until breaker whereupon they gradually lose chlorophyll and turn yellow, but do not accumulate lycopene, having reduced carotenoid levels in general (Tigchelaar et al., 1978). Furthermore, rin fruit do not undergo the respiratory climacteric, and remain firm at all stages of development. RIN encodes a MADS-box transcription factor which is predicted to operate upstream of the ethylene signalling cascade which triggers the ripening response (Vrebalov et al., 2002). Given this fundamental arrest of fruit development, we used the rin mutant to investigate the effects of blocking ripening on plastid and stromule morphology.
We introduced the gfp transgene into the rin mutant background by crossing. Plastid morphology is indistinguishable from that of wild type during the green stages of fruit development before breaker is reached, with the mesocarp plastid dimorphism readily apparent in MG fruit (data not shown). By 40 days post-breaker, rin fruit are hard and yellow (Figure 6c), and the plastids lose their chlorophyll (Figure 6d). Much of the plastid dimorphism is lost by this stage: in both IM and OM cells, plastid size and index are similar, but dramatically different from wild type when compared with either MG or B + 7 fruit (Table 1). The plastids in yellow rin fruit are small and numerous in comparison with wild type mesocarp cells, and are relatively regular in shape. Moreover, the plastids in yellow rin fruit often appear in a state of division (Figure 6a,b); this is supported by the greatly increased plastid index and reduced plastid size (Table 1).
The loss of plastid dimorphism across the mesocarp is reflected in the stromule architecture in rin fruit: long, extensive stromules are entirely absent and are replaced by limited protrusions that often form loops (Figure 6a,b). When analysed quantitatively, the OM–IM differences in stromule index largely disappear, with no significant difference between these two cell types in B + 40 rin fruit (Mann–Whitney, P = 0.22). Furthermore, relative to wild type B + 7 fruit, stromules are less common in IM cells but more so in OM cells of rin fruit (Figure 6e). Stromules are much shorter in rin B + 40 fruit than in wild type B + 7 fruit in both IM and OM cells, but there is still a small and significant difference in stromule length between OM and IM cells within the mutant fruit (Mann–Whitney, P = 0.01; Figure 6f and Table 1). This suggests that, although much reduced relative to wild type, there remains some aspect of plastid dimorphism even at this late stage of fruit development. From these data we conclude that the rin mutation has a major impact on stromule morphogenesis. As the stromules are frequently observed extending and retracting into the cytoplasm (data not shown), the basic machinery for stromule formation and movement are not compromised in this mutant. Therefore, we conclude that the dramatic effects on stromule formation are an indirect result of a block on plastid development.
Stromule length is negatively correlated with plastid density
The differences in stromule length and frequency between OM and IM cells suggest that plastid index may be a determining factor in stromule formation. In order to test the hypothesis that stromules become more abundant when plastids are further apart, we switched to another system based on tobacco hypocotyls. During skotomorphogenesis, the hypocotyl elongates and the epidermal cells expand but do not divide (Gendreau et al., 1997). To produce a range of plastid index values, seeds were sown on nutrient agar media and germinated in the dark for 5, 6, 7 or 9 days, and then transferred to light for a further day. The day of light treatment enhanced expression of the GFP transgene and inhibited further hypocotyl elongation. This resulted in seedlings with a wide range of hypocotyl lengths, which were then examined for stromule morphology in the epidermal cells (Figure 7a–e). Stromules were abundant in all treatments and usually protruded in the direction of cell elongation, that is in parallel with the lateral cell walls (Figure 7a–d).
We observed a significant trend in plastid morphology as hypocotyl length increased. At 6 days post-germination (dpg; this comprises 5 days dark and 1 day light), the hypocotyl exhibited slight elongation and the epidermal plastids frequently produced stromules with a mean length of 6 μm (Figure 7a,f). Longer dark periods led to greater hypocotyl elongation and more dispersed epidermal plastids, and stromules were significantly longer on average (Mann–Whitney, P < 0.05). However, at 8 and 10 dpg there was a large degree of variability in stromule length with no significant difference between the two treatments (Mann–Whitney, P > 0.05; Figure 7f), despite a large difference in hypocotyl elongation. Plastid index decreased with hypocotyl length, although this also appeared to tail off between 8 and 10 dpg (Figure 7g). Finally, plotting stromule length against plastid index revealed a strong and significant negative correlation between the two factors (P < 0.001; Figure 7h). From these data we infer that long stromules are produced by plastids in response to a rapid decrease in plastid index, thus increasing the contact surface area between the plastid compartment and the rest of the cell.
Previous studies into the distribution of stromules between different plastid and cell types have shown that they are highly variable for reasons which are unclear (Köhler and Hanson, 2000; Pyke and Howells, 2002). We describe here how plastid differentiation, plastid size and the density of plastids within the cell can independently influence the frequency and extent of stromules, thus providing insight into some of the developmental factors that regulate their formation.
Tomato fruit mesocarp contains two morphologically distinct populations of plastids, which differ in plastid size and number. Two types of tomato fruit chromoplast have been documented previously (Harris and Spurr, 1969; Rosso, 1967), which resemble closely the needle-like OM and ovoid IM chromoplasts described here. Moreover, Öztiğ (1962) noted that the chromoplast shape varies with position of the cell in the fruit. These two types of chromoplast are derived from progenitor chloroplasts that also exhibit dimorphism; however, we propose that the plastids present in IM cells of MG fruit are better considered as amyloplasts, for the following reasons. Firstly, both the presence of starch in these plastids of dark-grown fruit and the subsequent normal fruit ripening indicate that fruit photosynthesis is not essential for starch production or for fruit development. Secondly, tomato fruit are sink organs and no net photosynthesis occurs in MG fruits (Ho and Hewitt, 1986). IM plastids of MG fruit are thus atypical of chloroplasts in general, and therefore their morphology and associated stromules do not closely resemble those of other chloroplasts. Amyloplast stromules (Langeveld et al., 2000) and protrusions containing starch grains (Bechtel and Wilson, 2003) have been reported in wheat endosperm, and estimates of the length of amyloplast stromules in this tissue range from 2 to 30 μm (Langeveld et al., 2000), comparable with the IM cell plastid stromules from MG fruit.
The increase in stromule abundance during chromoplast differentiation only occurs in IM cells, suggesting that attainment of the chromoplast state per se is not sufficient for increased stromule abundance. This presents two aspects to be explained, namely why there exists such a dramatic difference in plastid morphology between OM and IM cells, and why the increase in stromule abundance is specific to IM cells. The plastid dimorphism originates from the early stages of fruit development, when starch distribution is non-uniform throughout the pericarp (Ho and Hewitt, 1986). It is unclear why the starch-storing plastids in IM cells should be less densely packed than non-storing ones of OM cells. Amyloplasts in wheat endosperm can be 10 μm or more in diameter (Langeveld et al., 2000), probably as a result of the starch granule expansion. Rapid starch granule deposition in IM cell plastids may restrict plastid division while the cell continues to expand during fruit growth: a similar observation in wheat endosperm prompted Bechtel and Wilson (2003) to speculate that amyloplasts may divide by some form of budding. This decreased plastid number/increased plastid size then persists through to the chromoplast stage, resulting in the large ovoid chromoplasts typical of IM cells. In OM cells, however, where bulky starch granules do not restrict plastid division, the plastids are smaller and attain a higher number within the cell, and maintain this state as chromoplasts in ripe fruit.
The negative impact of chloroplast components on stromule formation further demonstrates that plastid differentiation is a major contributor to the process. Stromules are less common in IM cells of B + 7 gf fruit than in wild type because the plastids in these cells are still chloroplast-like in nature, and thus express some morphological features typical of chloroplasts. The gf mutation had no effect in OM cells, reflecting the relative constancy of plastid morphology in this tissue in wild type fruit. Similarly, the rin mutation shows how blocking plastid differentiation affects stromule formation. By B + 40 the plastid dimorphism in the mesocarp largely disappears, implying that substantial plastid division must have occurred post-breaker, especially in the IM cells. Stromules are also remarkably similar between the two cell types, with absolute differences being small. These observations suggest that the nature of plastid stromules is much more closely related to the differentiation status of the plastid in question rather than the cell type. By blocking chromoplast development, the morphology associated with chromoplasts and the two plastid populations are lost.
In general, smaller plastids produce the shortest stromules (Table 1), presumably because of the limited amounts of membrane available to be incorporated into them. However, while mesophyll chloroplasts are among the largest plastids in a plant, they produce relatively short stromules (Gray et al., 2001), indicating that there must be other factors that control stromule formation. Little is known about the molecular regulation of plastid and organelle morphology in plants, but changes in membrane elasticity and amenability to distortion may be one contributing factor to stromule formation. Members of the FtsZ family of proteins have been implicated in regulating chloroplast shape (Kiessling et al., 2000). FtsZ proteins are involved in chloroplast division in both higher and lower plants, and share structural and functional similarity to tubulins (Osteryoung and McAndrew, 2001). Overexpression of an FtsZ-GFP fusion protein in Physcomitrella patens showed a filamentous, reticulate scaffold of FtsZ apparently just below the plastid envelope (Kiessling et al., 2000), suggesting that plastids maintain their shape by means of a proteinaceous ‘plastoskeleton’, although this may be an artefact of FtsZ overexpression (Vitha et al., 2001). Nevertheless, it has been confirmed that the actin cytoskeleton is at least partially responsible for stromule movement (Kwok and Hanson, 2003), so it is conceivable that the ability of actin microfilaments to distort the plastid membrane is related to its elasticity as determined by some plastidial structural component. Changes in stromule length and frequency may be a result of changes in plastid membrane amenability to deformation, increased plastid-cytoskeletal activity or a combination of both. In addition, the increase in chromoplast membrane availability may be enhanced by the break-up of thylakoid membranes and their incorporation into stromules. Accordingly, we suggest that OM cells of wild type fruit possess fewer and shorter stromules than IM cells because of a fundamental, developmentally early difference in plastid size and hence membrane availability. Upon ripening, the large IM plastids lose some chloroplast/amyloplast structural features and the plastid envelope attains a form more amenable to stromule biogenesis. Consequently, plastids at the transitional stages of chloroplast–chromoplast differentiation have intermediate forms.
The data from elongated tobacco hypocotyls indicate that the cellular density of plastids is another factor which determines stromule formation. Increased plastid surface area in these cells might be of particular importance as expanding cells require rapid synthesis and supply of fatty acids for incorporation into phospholipids (Neuhaus and Emes, 2000). While plastid density in dividing and expanding mesophyll cells remains approximately constant (Pyke, 1997) where maximal light interception is important, it is presumably more efficient for a hypocotyl epidermal cell to increase stromule abundance rather than maintain a high density of plastids. Similarly, it may be significant that stromules are aligned with the cell wall, thus supplying fatty acids close to their point of need; however, this may be an indirect effect of the orientation of the actin cytoskeleton and cytoplasmic streaming in general (Kwok and Hanson, 2004b). Notably, the tomato fruit data strongly support the tobacco data: long stromules are associated with plastids that are further apart, whereas short stromules are present in cells with a high density of plastids (Table 1). In IM cells, the increase in stromule membranes would improve metabolic contact between the plastid and the cytosol. In OM cells, higher density of plastids would not require this. In MG fruit, stromules may be important in starch generation, by acting as a surface for import of hexose phosphates from the cytosol. Once the fruit begins to ripen, stromules might provide greater import area for novel proteins involved in carotenoid biosynthesis and chromoplast differentiation (Camara et al., 1995). In the case of an average IM cell chromoplast at B + 7, a single stromule of 30 μm in length occupies just 9% of the plastid volume, but constitutes some 34% of the total plastid surface area (assuming that the plastid body is a sphere and the stromule a uniform cylinder of 0.9 μm in diameter). Furthermore, stromules may assist in the co-ordination of plastid activities by reducing inter-plastid distances. Signalling between plastids may be important in regulating their cellular dynamics: rather like bacterial quorum sensing, plastids presumably need to assess their population level within the cell in order to initiate plastid division with appropriate timing.
Given that stromules are capable of transporting endogenous proteins such as Rubisco (Kwok and Hanson, 2004a) and that they increase the plastid surface area with minimal use of stromal volume, it is likely that they are adaptive features of the plant cell. Several aspects of stromule biology have been documented, including the molecular basis for their movement (Kwok and Hanson, 2003, 2004b) and their ability to transport macromolecules (Kwok and Hanson, 2004a), but little attempt has been made to explain their variability. Besides the factors discussed here, other determinants may play a role, such as the cell cycle. Recently, it has been demonstrated that plastids congregate in perinuclear regions in preparation for cytokinesis (Sheahan et al., 2004); plastids in this position in leaf epidermal cells frequently exhibit stromules protruding towards the peripheral cytoplasm (Arimura et al., 2001).
Currently, several questions regarding stromule biology remain unanswered. What, for example, determines whether a plastid produces many stromules as opposed to one long one? Is the direction of stromule outgrowth a random event that is dependent on cytoskeletal arrangement, or is there some form of specificity? How is the density of plastids sensed and integrated with the metabolic needs of the cell? Substantive progress in this field will require the identification of candidate proteins that directly regulate plastid form, and those that allow the plastid envelope to interact with the actin cytoskeleton.
Tomato (Lycopersicon esculentum Mill. var. ‘Ailsa Craig’) seeds were sown in a 6:1 mixture of compost and perlite, and germinated under glasshouse conditions (minimum 16 h day regime, 24°C). Plants were allowed to grow to full maturity in 25 cm pots to maximize fruit yield, and fruit was sampled from the first or second truss. Transgenic tomato plants of wild type background, containing a construct targeting GFP to the plastid, were generated as described previously (Bird et al., 1988; Pyke and Howells, 2002). The construct consists of the Arabidopsis recA transit sequence fused to the mGFP4 coding region, driven by a double CaMV 35S promoter (Köhler et al., 1997). This construct was introduced into the green flesh and ripening inhibitor mutant backgrounds by crossing, using the mutants as the pollen recipient. The mutant lines are near-isogenic with the ‘Ailsa Craig’ background (Darby et al., 1977). F1 plants were screened for GFP fluorescence and selfed, and homozygous mutants were identified by means of their fruit phenotype in the F2 generation. Analysis was carried out on F3 individuals.
To obtain dark-grown fruit expressing the plastid-targeted GFP construct (wild type background), the first or second truss was covered with an A5-sized, brown paper envelope containing four sheets of A4 paper. This was then covered in one layer of aluminium foil and secured over the developing truss with masking tape, and tapped by hand every so often to promote pollination. Fruit were examined by microscopy at a stage equivalent to MG, as judged by the fruit on an untreated truss of a plant of similar age.
Tobacco seedlings contained a transgene integrated into the plastid genome, providing plastid-localized expression of GFP under the control of the ribosomal RNA operon promoter and rbcL leader sequence (Kahn and Maliga, 1999). Seeds were surface-sterilized by treatment in 10% bleach for 10 min, followed by three rinses with distilled water. The seeds were sown in 8 cm-high pots containing MSR3 media (4.2 g l−1 MS salts, 3% sucrose, 1 mg l−1 thiamine, 0.5 mg l−1 nicotinic acid, 0.5 mg l−1 pyroxidine, 7% agar) and stratified at 4°C for 2 days. The pots were exposed to light for 4 h to ensure germination, and then wrapped in two layers of foil for the relevant length of time. Pots were incubated at 24°C, and light was provided with a 16 h light/8 h dark regime.
Tissue sampling and microscopy
Fruit tissue from tomato plants was harvested and imaged immediately. Fruit pericarp was sliced in a longitudinal (i.e. apical-basal) direction using a sharp scalpel blade. Tissue was selected from regions of pericarp approximately equidistant from the stylar and penduncular poles of the fruit, and thin sections mounted on a glass slide in 10% glycerol. Using confocal microscopy, the upper 20–40 μm of individual pericarp cells were imaged as a Z-series and the component images (taken 1 μm apart) were merged to form a maximum intensity projection. Such images display the upper surface of the approximately spherical cell, with the plastids situated between the vacuole and the plasma membrane. Tobacco hypocotyls were imaged by dissecting the hypocotyl from the seedling before mounting. The upper 15–20 μm of the central region (i.e. midway between the root and cotyledonary tips) of the hypocotyl, encompassing the epidermis, was imaged. Confocal microscopy was performed with a Leica TCS2 confocal scanhead attached to a Leica DMRE upright microscope (Leica, Mannheim, Germany). GFP and chlorophyll were excited using the 488 nm line from the Ar laser, and emission signals were collected in separate channels, at wavelengths between 495 and 526 nm, and between 631 and 729 nm, respectively. Transmitted light was also collected in a separate channel. The GFP signal and chlorophyll autofluorescence were false-coloured green and red, respectively. Images shown are maximum intensity projections of optical slices produced by the LCS software provided. Epifluorescence microscopy was performed on a Nikon Optiphot microscope (Nikon, Kingston-upon-Thames, UK) with a DM 510 fluorescence filter block, and images were acquired using a Nikon DXM-1200 digital camera. Further image manipulation, including level adjustment and channel merging, was performed using Adobe Photoshop 7 (Adobe Systems Inc., San Jose, CA, USA).
Fruit were examined at four developmental stages: MG, 1 day post-breaker (B + 1), 3 days post-breaker (B + 3) and ripe (B + 7). The maximum intensity projections from the confocal microscope were imported into LUCIA G quantitative image analysis software (NIKON, UK) and quantified in various ways as follows. A 400 × 400 pixel square ‘quadrat’ (equivalent to 156 μm × 156 μm) was positioned over the centre of the imaged cell, and the proportion of plastids with stromules within the quadrat was recorded. A stromule was defined as any visible projection emanating from the surface of the plastid of less than 1 μm in diameter. Plastid index was defined as the number of plastids within the quadrat. In addition, stromule length was determined from up to 15 stromules from each image, and plastid plan surface area (estimated with a best fit 5-point ellipse) was determined as a mean of at least five plastids within the quadrat.
For tobacco seedlings the same methodology was employed, except that the quadrat was equivalent to 93 μm × 93 μm because of the higher magnification of the image. The quadrat covered several cells, and the term ‘plastid index’ equates to the number of plastids counted within the quadrat. Stromules were measured only on those plastids where the plastid body could be reasonably defined.
For each of the developmental stages considered, the mesocarp was divided into inner and outer regions based on the plastid dimorphism observed between them. At least 10 cells were measured from each developmental stage and region of the mesocarp considered (i.e. at least 20 cells per stage; see Table 1), sampling from at least four different fruit per stage. Each cell was considered an independent data point. For tobacco, 10 images per treatment were analysed, and each image was treated as an independent data point for stromule length and plastid index. Image analysis data were entered into MINITAB 13 statistical software (Minitab Inc., Philadelphia, PA, USA). The proportion of plastids with stromules was transformed with the angular transformation (asin√X, where X is the proportion) to stabilize variance, creating a linear variable that we termed ‘stromule index’, which allows more valid comparison between treatments when displayed graphically. Stromule lengths were found to be right skewed and thus were transformed by converting to natural logarithms before statistical analysis was performed. To assess differences between plastid parameters, Mann–Whitney rank sum tests were utilized as this test requires the satisfaction of fewer assumptions.
The authors thank Maureen Hanson, Cornell University, Ithaca, for the gift of the plastid-targeted GFP construct. MTW is a grateful recipient of a Sainsbury PhD studentship funded by The Gatsby Charitable Foundation.