SEARCH

SEARCH BY CITATION

REFERENCES

  • 1
    Lazzarin, P. and Tovo, R. (1998) A notch intensity factor approach to the stress analysis of welds. Fatigue Fract. Eng. Mater. Struct. 21, 10891103.
  • 2
    Atzori, B. and Meneghetti, G. (2001) Fatigue strength of fillet welded structural steels: finite elements, strain gauges and reality. Int. J. Fatigue 23, 713721.
  • 3
    Lazzarin, P. and Livieri, P. (2001) Notch stress intensity factors and fatigue strength of aluminium and steel welded joints. Int. J. Fatigue 23, 225232.
  • 4
    Yakubovskii, V. V. and Valteris, I. I. (1989) Geometrical parameters of butt and fillet welds and their influence on the welded joint fatigue life. IIW Document XIII, 1326–89.
  • 5
    Seto, A., Yoshida, Y. and Galtier, A. (2004) Fatigue properties of arc-welded lap joints with weld start and end points. Fatigue Fract. Eng. Mater. Struct. 27, 11471155.
  • 6
    Lazzarin, P., Lassen, T. and Livieri, P. (2003) A Notch Stress Intensity approach applied to fatigue life predictions of welded joints with different local toe geometry. Fatigue Fract. Eng. Mater. Struct. 26, 4958.
  • 7
    Williams, M. L. (1952) Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J. Appl. Mech. 19, 526528.
  • 8
    Gross, R. and Mendelson, A. (1972) Plane elastostatic analysis of V-notched plates. Int. J. Fract. Mech. 8, 267327.
  • 9
    Boukharouba, T., Tamine, T., Nui, L., Chehimi, C. and Pluvinage, G. (1995) The use of notch stress intensity factor as a fatigue crack initiation parameter. Eng .Fract. Mech. 52, 503512.
  • 10
    Verreman, Y. and Nie, B. (1996) Early development of fatigue cracking at manual fillet welds. Fatigue Fract. Eng. Mater. Struct. 19, 669681.
  • 11
    Meneghetti, G. (1998) Design approaches for fatigue analysis of welded joints. PhD Thesis, University of Padova (in Italian).
  • 12
    Meneghetti, G. and Tovo, R. (1998) Stress gradient effects on fatigue strength of light alloy weldments. In: Proceedings of 7th International Conference on Joints in Aluminium INALCO (Edited by  M. H.Ogle, S. J.Maddox and P. L.Threadgill), Cambridge , UK , 389400.
  • 13
    Tovo, R. and Lazzarin, P. (1999) Relationships between local and structural stress in the evaluation of the weld toe stress distribution. Int. J. Fatigue 21, 10631078.
  • 14
    Lazzarin, P. and Zambardi, R. (2001) A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches. Int. J. Fract. 112, 275298.
  • 15
    Livieri, P. and Lazzarin, P. (2005) Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values. Int. J. Fract. 133, 247278.
  • 16
    Lazzarin, P., Sonsino, C. M. and Zambardi, R. (2004) A Notch Stress Intensity approach to predict the fatigue behaviour of T butt welds between tube and flange when subjected to in–phase bending and torsion loading. Fatigue Fract. Eng. Mater. Struct. 27, 127141.
  • 17
    Lazzarin, P., Livieri, P., Berto, F. and Zappalorto, M. (2008) Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading. Eng. Fract. Mech. 75, 18751889.
  • 18
    Lazzarin, P. and Berto, F. (2008) Control volumes and strain energy density under small and large scale yielding due to tensile and torsion loading. Fatigue Fract. Eng. Mater. Struct. 31, 95107.
  • 19
    Taylor, D., Barrett, N. and Lucano, G. (2002) Some new methods for predicting fatigue in welded joints. Int. J. Fatigue 24, 509518.
  • 20
    Crupi, G., Crupi, V., Guglielmino, E. and Taylor, D. (2005) Fatigue assessment of welded joints using critical distance and other methods. Eng. Failure Anal. 12, 129142.
  • 21
    Xiao, Z. G. and Yamada, K. (2004) A method of determining geometric stress for fatigue strength evaluation of steel welded joints. Int. J. Fatigue 26, 12771293.
  • 22
    Meneghetti, G. and Lazzarin, P. (2006) Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components. Fatigue Fract. Eng. Mater. Struct. 30, 95106.
  • 23
    Atzori, B., Lazzarin, P. and Meneghetti, G. (2008) Fatigue strength assessment of welded joints: from the integration of Paris' law to a synthesis based on the Notch Stress Intensity Factors of the uncracked geometries. Eng. Fract. Mech. 75, 364378.
  • 24
    Nisitani, H. and Teranishi, T. (2001) KI value of a circumferential crack emanating from an ellipsoidal cavity obtained by the crack tip stress method in FEM. In: Proceedings of the 2nd International Conference on Fracture and Damage Mechanics FDM (Edited by  M.Guagliano and M. H.Aliabadi), Milan , Italy , 141146.
  • 25
    Nisitani, H. and Teranishi, T. (2004) KI value of a circumferential crack emanating from an ellipsoidal cavity obtained by the crack tip stress method in FEM. Eng. Fract. Mech. 71, 579585.
  • 26
    Meneghetti, G. (2002) Simplified evaluation of the local stress field in fillet welded joints. Rivista Italiana della Saldatura 4, 499505 (in Italian).
  • 27
    Maddox, S. J. (1987) The effect of plate thickness on the fatigue strength of fillet welded joints. Abington Publishing, Abington, Cambridge .
  • 28
    Gurney, T. R. (1991) The fatigue strength of transverse fillet welded joints. Abington Publishing, Abington, Cambridge .
  • 29
    Gurney, T. R. (1991) Fatigue of thin walled joints under complex loading. Abington Publishing, Abington, Cambridge .
  • 30
    Kihl, D. P. and Sarkani, S. (1997) Thickness effects on the fatigue strength of welded steel cruciforms. Int. J. Fatigue 19, S311S316.
  • 31
    Kihl, D. P. and Sarkani, S. (1999) Mean stress effects in fatigue of welded steel joints. Probabilistic Eng. Mech. 14, 97104.
  • 32
    Branco, C. M., Maddox, S. J., Infante, V. and Gomes, E. C. (1999) Fatigue performance of tungsten inert gas (TIG) and plasma welds in thin section. Int. J. Fatigue 21, 587601.
  • 33
    Haagensen, P. J., Statnikov, E. S. and Lopez-Martinez, L. (1998) Introductory fatigue tests on welded joints in high strength steel and aluminium improved by various methods including ultrasonic impact treatment (UIT). International Institute of Welding, IIW Document XIII, 1748–98.
  • 34
    Takahashi, I., Ushijiama, M., Takada, A., Akiyama, S. and Maenaka, H. (1999) Fatigue behaviour of a box-welded joint under biaxial cyclic loads. Fatigue Fract. Eng. Mater. Struct. 22, 869877.
  • 35
    Takahashi, I., Takada, A., Ushijiama, M. and Akiyama, S. (2003) Fatigue behaviour of a box-welded joint under biaxial cyclic loading: effect of biaxial load range ratio and cyclic compressive loads in the lateral direction. Fatigue Fract. Eng. Mater. Struct. 26, 439448.
  • 36
    Huo, Lixing, Wang, Dongpo and Zhang, Yufeng (2005) Investigation of fatigue behaviour of welded joints treated by TIG dressing and ultrasonic peening under variable-amplitude load. Int. J. Fatigue 27, 95101.
  • 37
    Razmjoo, G. R. (1996) Fatigue of load-carrying fillet welded joints under multiaxial loading. TWI REF. 7309.02/96/909, Abington Publishing, Cambridge , UK , 63100.
  • 38
    Yousefi, F., Witt, M. and Zenner, H. (2001) Fatigue strength of welded joints under multiaxial loading: experiments and calculations. Fatigue Fract. Eng. Mater. Struct. 24, 339355.
  • 39
    Amstutz, H., Störzel, K. and Seeger, T. (2001) Fatigue crack growth of a welded tube-flange connection under bending and torsional loading. Fatigue Fract. Eng. Mater. Struct. 24, 357368.
  • 40
    Bäckström, M., Siljander, A., Kuitunen, R. and Ilvonen, R. (1997) Multiaxial fatigue experiments of square hollow section tube-to-plate welded joints. Proceedings of the First North European Engineering and Science Conference (NESCO I), In: Welded High strength steel structures (Edited by  A. F.Blom), EMAS, London , pp. 163177.
  • 41
    Meneghetti, G., Marigo, M. and Righetto, F. (2005) The local approach combined with a FE modelling technique for fatigue analysis of a steel tubular fillet-welded joint. In: Proceedings of the International Conference on CAE and Computational Technologies for Industries TCN CAE 2005, Lecce (Italy). On CD Rom.
  • 42
    Piršić, T. (1999) Experimentally based method for fatigue life prediction of aluminium welded joints. In: Proceedings of 7th International Fatigue Conference (Edited by  X.-R.Wu and Z.-G.Wang), EMAS Publishing, pp. 13091314.
  • 43
    Pinho da Cruz, J. A. M., Costa, J. D. M., Borrego, L. F. P. and Ferreira, J. A. M. (2000) Fatigue life prediction in AlMgSi1 lap weldments. Int. J. Fatigue 22, 601610.
  • 44
    Meneghetti, G., Tovo, R., Patricolo, M. and Volpone, M. (1997) Experimental analysis of the fatigue strength of welded structural details in aluminium alloy. In: Proceedings of the 26th AIAS National Conference, Catania (Italy), 393400 (in italian).
  • 45
    Voutaz, B., Smith, I. F. and Hirt, M. A. (1995) Fatigue Behaviour of Aluminium Beams with Welded Attachments. In: Proceedings of the 3rd International Conference on Steel and Aluminium Structures ICSAS (Edited by  Askar G.Altay), Istanbul , Turkey , 213220.
  • 46
    Macdonald, K. A. and Haagensen, P. J. (1999) Fatigue design of welded aluminium rectangular hollow section joints. Eng. Failure Anal. 6, 113130.
  • 47
    Haagensen, P. J. and Oma, S. (2001) Fatigue life improvement of welded aluminium joints by peening techniques. In: Proceedings of 8th International Conference on Joints in Aluminium INALCO, 2001, Munich, Germany, 114.
  • 48
    Sonsino, C. M., Küppers, M., Gäth, N., Maddox, S. and Razmjoo, R. (1999) Fatigue Behaviour of Welded High Strength Components under Combined Multiaxial Variable Amplitude Loading. Report no. FB-218. European Community for Steel and Coal (ECSC), Contract 7210 MC/109. The Welding Institute (TWI), Abington, Cambridge , UK ; Fraunhofer-Institut für Betriebsfestigkeit (LBF), Darmstadt , Germany .
  • 49
    Sonsino, C. M. and Küppers, M. (2001) Multiaxial fatigue of welded joints under constant and variable amplitude loading. Fatigue Fract. Eng. Mater. Struct. 24, 309327.
  • 50
    Meneghetti, G. and Tovo, R. (2002) Fatigue strength assessment of welded structures by means of the Notch-SIF approach. In: Proceedings of the 8th International Fatigue Congress (Edited by  A. F.Blom), Stockholm , Sweden , 18731880.
  • 51
    EN 1993-1-9, Eurocode 3: Design of steel structures – Part 1–9: Fatigue. European Committee for Standardization, 2005.
  • 52
    EN 1999-1-3, Eurocode 9: Design of aluminium structures – Part 1–3: Structures susceptible to fatigue. European Committee for Standardization, 2007.
  • 53
    Lazzarin, P., Berto, F. and Radaj, D. (2006) Uniform fatigue strength of butt and fillet welded joints in terms of the local strain energy density. In: Proceedings of the 9th International Fatigue Congress, Atlanta, USA. On CD Rom.
  • 54
    Tovo, R. and Livieri, P. (2007) An implicit gradient application to fatigue of sharp notches and weldments. Eng. Fract. Mech. 4, 515526.
  • 55
    Fermér, M. and Svensson, H. (2001) Industrial experiences of FE-based fatigue life predictions of welded automotive structures. Fatigue Fract. Eng. Mater. Struct. 24, 489500.
  • 56
    Poutiainen, I. and Marquis, G. (2006) A fatigue assessment method based on weld stress. Int. J. Fatigue 28, 10371046.
  • 57
    Atzori, B., Lazzarin, P. and Meneghetti, G. (2005) A unified treatment of the mode I fatigue limit of components containing notches or defects. Int. J. Fract. 133, 6187.
  • 58
    El Haddad, M. H., Topper, T. H. and Smith, K. N. (1979) Prediction of Non-Propagating Cracks. J. Eng. Mater. Technol. 101, 4245.
  • 59
    Atzori, B. and Dattoma, V. (1983) A comparison of fatigue behaviour of welded joints in steel and aluminium alloys. IIW Document Doc XIII, 1089/83.
  • 60
    Haibach, E. (1989) Service fatigue-strength – methods and data for structural analysis. VDI, Dusseldorf .
  • 61
    Radaj, D. (1990) Design and analysis of fatigue resistant welded structures. Abington Publishing, Cambridge .
  • 62
    Kitagawa, H. and Takahashi, S. (1976) Applicability of fracture mechanics to very small cracks in the early stage. In: Proceedings of the 2nd International Conference on Mechanical Behaviour of Materials, 627631.