SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Les P. Pook, Filippo Berto, Alberto Campagnolo, Paolo Lazzarin, J.Y. Buffière, M. Brune, F. Morel, Y. Nadot, Coupled fracture mode of a cracked disc under anti-plane loading, MATEC Web of Conferences, 2014, 12, 04014

    CrossRef

  2. 2
    K. Tanaka, Crack initiation and propagation in torsional fatigue of circumferentially notched steel bars, International Journal of Fatigue, 2014, 58, 114

    CrossRef

  3. 3
    Filippo Berto, Paolo Lazzarin, Fatigue strength of Al7075 notched plates based on the local SED averaged over a control volume, Science China Physics, Mechanics and Astronomy, 2014, 57, 1, 30

    CrossRef

  4. 4
    F. Berto, P. Lazzarin, C. Marangon, Fatigue strength of notched specimens made of 40CrMoV13.9 under multiaxial loading, Materials & Design, 2014, 54, 57

    CrossRef

  5. 5
    Andrea Carpinteri, Camilla Ronchei, Andrea Spagnoli, Sabrina Vantadori, Lifetime estimation in the low/medium-cycle regime using the Carpinteri–Spagnoli multiaxial fatigue criterion, Theoretical and Applied Fracture Mechanics, 2014,

    CrossRef

  6. 6
    F. Berto, P. Lazzarin, R. Tovo, Multiaxial fatigue strength of severely notched cast iron specimens, International Journal of Fatigue, 2014, 67, 15

    CrossRef

  7. 7
    F. Berto, P. Lazzarin, Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches, Materials Science and Engineering: R: Reports, 2014, 75, 1

    CrossRef

  8. 8
    C. Marangon, P. Lazzarin, F. Berto, A. Campagnolo, Some analytical remarks on the influence of phase angle on stress fields ahead of sharp V-notches under tension and torsion loads, Theoretical and Applied Fracture Mechanics, 2014,

    CrossRef

  9. 9
    A.R. Torabi, E. Pirhadi, Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading, European Journal of Mechanics - A/Solids, 2014,

    CrossRef

  10. 10
    P. Lazzarin, M. Zappalorto, F. Berto, Three-dimensional stress fields due to notches in plates under linear elastic and elastic–plastic conditions, Fatigue & Fracture of Engineering Materials & Structures, 2014, 37, 8
  11. 11
    F.V. Antunes, L. Correia, A.L. Ramalho, A parameter for quantitative analysis of plasticity induced crack closure, International Journal of Fatigue, 2013,

    CrossRef

  12. 12
    F. Berto, A review on coupled modes in V-notched plates of finite thickness: A generalized approach to the problem, Physical Mesomechanics, 2013, 16, 4, 378

    CrossRef

  13. 13
    X. A. Hu, X. G. Yang, J. K. Wang, D. Q. Shi, J. Huang, A simple method to analyse the notch sensitivity of specimens in fatigue tests, Fatigue & Fracture of Engineering Materials & Structures, 2013, 36, 10
  14. 14
    P. Lazzarin, F. Berto, M. R. Ayatollahi, Brittle failure of inclined key-hole notches in isostatic graphite under in-plane mixed mode loading, Fatigue & Fracture of Engineering Materials & Structures, 2013, 36, 9
  15. 15
    A. Risitano, G. Risitano, Determining fatigue limits with thermal analysis of static traction tests, Fatigue & Fracture of Engineering Materials & Structures, 2013, 36, 7
  16. 16
    D. Frank, J. Romanoff, H. Remes, Fatigue strength assessment of laser stake-welded web-core steel sandwich panels, Fatigue & Fracture of Engineering Materials & Structures, 2013, 36, 8
  17. 17
    F. Berto, D.A. Cendon, P. Lazzarin, M. Elices, Fracture behaviour of notched round bars made of PMMA subjected to torsion at −60°C, Engineering Fracture Mechanics, 2013, 102, 271

    CrossRef

  18. 18
    Maksym Gladskyi, Ali Fatemi, Notched fatigue behavior including load sequence effects under axial and torsional loadings, International Journal of Fatigue, 2013, 55, 43

    CrossRef

  19. 19
    F. Berto, P. Lazzarin, P. Livieri, On the second non-singular stress term of the V-notch solution: a new engineering solution, International Journal of Fracture, 2013, 181, 1, 83

    CrossRef

  20. 20
    Darko Frank, Heikki Remes, Jani Romanoff, On the slope of the fatigue resistance curve for laser stake-welded T-joints, Fatigue & Fracture of Engineering Materials & Structures, 2013, 36, 12
  21. 21
    Luca Susmel, David Taylor, The Theory of Critical Distances to estimate finite lifetime of notched components subjected to constant and variable amplitude torsional loading, Engineering Fracture Mechanics, 2013, 98, 64

    CrossRef

  22. 22
    F. Berto, C. Marangon, Three-dimensional effects in finite thickness plates weakened by rounded notches and holes under in-plane shear, Fatigue & Fracture of Engineering Materials & Structures, 2013, 36, 11
  23. 23
    F. Berto, M. Elices, P. Lazzarin, M. Zappalorto, Fracture behaviour of notched round bars made of PMMA subjected to torsion at room temperature, Engineering Fracture Mechanics, 2012, 90, 143

    CrossRef

  24. 24
    Filippo Berto, P. Lazzarin, Ch. Marangon, The effect of the boundary conditions on in-plane and out-of-plane stress field in three dimensional plates weakened by free-clamped V-notches, Physical Mesomechanics, 2012, 15, 1-2, 26

    CrossRef