SEARCH

SEARCH BY CITATION

References

  • Angerer, G., K. Bätcher, and P. Bars. 1993. Verwertung von Elektronikschrott – Stand der Technik, Forschungs- und Technologiebedarf[Recycling of electronic scrap – State-of-the-art of the need for technique, research and technology]. Bundesministerium für Forschung und Technologie. Berlin : Erich Schmidt Verlag.
  • Art, S. 2008. Personal communication with S. Art, Sales and Customer Service. Umicore Precious Metals Refining , Hoboken , Belgium , 21 August 2008.
  • Ayres, R.U. 1997. Metals recycling: Economic and environmental implications. Resources, Conservation and Recycling 21(3): 145173.
  • Babakina, O. and T.E. Graedel. 2005. The industrial platinum cycle for Russia: A case study of materials accounting. Working Paper Number 8, New Haven , CT , USA : Yale School of Forestry and Environmental Studies.
  • Behrendt, S., M. Scharp, L. Erdmann, W. Kahlenborn, M. Feil, C. Dereje, R. Bleischwitz and R. Delzeit. 2007. Rare metals – Measures and concepts for the solution of the problem of conflict-aggravating raw material extraction – The example of coltan. Research Report 363 01 124, Text 23/07. Dessau , Germany : Federal Environmental Agency (Umweltbundesamt).
  • Bertram, M., T.E. Graedel, H. Rechberger and S. Spatari. 2002. The contemporary European copper cycle: Waste management subsystem. Ecological Economics 42(1/2): 4357.
  • Brunner, P.H. and H. Rechberger. 2004. Practical handbook of material flow analysis. New York : Lewis Publishers.
  • Castro, M.B., J.A.M. Remmerswaal, J.C. Brezet, A. Van Schaik and M.A. Reuter. 2005. A simulation model of the comminution-liberation of recycling systems – relationships between product design and the liberation of materials during recycling. International Journal of Mineral Processing 75(3–4): 255281.
  • Cencic, O. and H. Rechberger. 2008. Material flow analysis with software STAN. Journal of Environmental Engineering Management 18(1): 37.
  • Chancerel, P. and S. Rotter. 2007. Recycling oriented characterisation of WEEE. In Proceedings of Eco-X conference, 9–11 May, Vienna : 205212.
  • Chancerel, P. and S. Rotter. 2008. Stoffstromanalyse und Modellierung von mechanischen Aufbereitungsprozessen für Elektro- und Elektronikaltgeräte [Substance flow analysis and modeling of mechanical pre-processing for waste electrical and electronic equipment]. In Proceedings of Abfallforschungstage. Göttingen , Germany : Cuvillier.
  • Commission of the European Communities (COM). 2005. Taking sustainable use of resources forward: A Thematic strategy on the prevention and recycling of waste. COM(2005) 666. Brussels : Commission of the European Communities.
  • Cui J. and E. Forssberg. 2003. Mechanical recycling of waste electric and electronic equipment: A review. Journal of Hazardous Materials 99(3): 243263.
  • ElektroG. 2005. Act Governing the Sale, Return and Environmentally Sound Disposal of Electrical and Electronic Equipment of March 16 2005 (Electrical and Electronic Equipment Act, in German: Gesetz über das Inverkehrbringen, die Rücknahme und die umweltverträgliche Entsorgung von Elektro- und Elektronikgeräten, ElektroG).
  • Elshkaki, A. 2007. Systems analysis of stock buffering: Development of a dynamic substance flow-stock model for the identification and estimation of future resources, waste streams and emissions. Ph.D. Thesis, Leiden University , Leiden , The Netherlands .
  • Ernst, T., R. Popp, M. Wolf and R. Van Eldik. 2003. Analysis of eco-relevant elements and noble metals in printed wiring boards using AAS, ICP-AES and EDXRF. Analytical and Bioanalytical Chemistry 375(6): 805814.
  • E-Sankey. 2008. http://www.e-sankey.com. Accessed August 2008.
  • Gmünder, S. 2007. Recycling – From Waste to Resource – Assessment of optimal manual dismantling depth of a desktop PC in China based on eco-efficiency calculations. Diploma thesis, Eidgenössische Technische Hochschule Zürich , Zürich .
  • Hagelüken, C. and M. Buchert. 2008. The mine above ground – opportunities & challenges to recover scarce and valuable metals from EOL electronic devices. In Proceedings of 7th International Electronics Recycling Congress, 16–18 January, Salzburg , Austria .
  • Hagelüken, C. 2006. Improving metal returns and eco-efficiency in electronics recycling – a holistic approach for interface optimisation between pre-processing and integrated metals smelting and refining. In Proceedings of the IEEE International Symposium on Electronics & the Environment, 8–11 May, San Francisco : 218223.
  • Hagelüken, C., M. Buchert and H. Stahl. 2005. Materials flow of platinum group metals. Umicore AG & Co. KG and Öko-Institut e.V. London : GFMS Limited.
  • Hischier, R., P. Wäger and J. Gauglhofer. 2005. Does WEEE recycling make sense from an environmental perspective? The environmental impacts of the Swiss take-back and recycling systems for waste electrical and electronic equipment (WEEE). Environmental Impact Assessment Review 25(5): 525539.
  • Huisman, J. 2003. The QWERTY/EE concept, quantifying recyclability and eco-efficiency for end-of-life treatment of consumer electronic products. Ph.D. thesis, Delft University of Technology , Delft , Netherlands .
  • Huisman, J. 2004. QWERTY and eco-efficiency analysis on cellular phone treatment in Sweden. The eco-efficiency of the direct smelter route versus mandatory disassembly of printed circuit boards. Stockholm , Sweden : El-Kretsen.
  • Huisman, J., F. Magalini, R. Kuehr, C. Maurer, C. Delgado, E. Artim and A.L.N. Stevels. 2007. 2008 review of directive 2002/96 on waste electrical and electronic equipment (WEEE). Bonn , Germany : United Nations University.
  • Ignatenko, O., A. Van Schaik and M.A. Reuter. 2007. Exergy as tool for evaluation of the resource efficiency of recycling systems. Minerals Engineering 20(9): 862874.
  • Johnson, J., M. Bertram, K. Henderson, J. Jirikowic, and T.E. Graedel. 2005a. The contemporary Asian silver cycle: One-year stocks and flows. Journal of Material Cycles and Waste Management 7(2): 93103.
  • Johnson, J., J. Jirikowic, M. Bertram, D. Van Beers, R.B. Gordon, K. Henderson, R. J. Klee, T. Lanzano, R. J. Lifset, L. Oetjen, and T.E. Graedel. 2005b. Contemporary anthropogenic silver cycle: A multilevel analysis. Environmental Science & Technology 39(12): 46554665.
  • Keller, M. 2006. Assessment of gold recovery processes in Bangalore, India and evaluation of an alternative recycling path for printed wiring boards. Diploma thesis, Eidgenössische Technische Hochschule Zürich , Zürich .
  • Kramer, T. 1994. Mechanische Aufbereitung von Leiterplatten [Mechanical processing of printed circuit boards]. In Verwertung von Elektro- und Elektronikgeräten[Recycling of electrical and electronic appliances]. Materialien Nr. 3., proceedings of 6. Aachener Kolloquium Abfallwirtschaft. Essen , Germany : Landesumweltamt Nordrhein-Westfalen.
  • Kreibe, S., J. Wagner and K. Rommel. 1996. Verwertung und Beseitigung von Leiterplattenschrott[Recovery and disposal of waste printed circuit boards]. BIfA-Text Nr. 7. Böblingen , Germany : Bayerisches Institut für Abfallforschung.
  • Lanzano, T., M. Bertram, M. De Paloa, C. Wagner, K. Zyla, and T.E. Graedel. 2006. The contemporary European silver cycle. Resources, Conservation and Recycling 46(1): 2743.
  • Legarth, J.B., L. Altmg, B. Danzer, D. Tartler, K. Brodersen, H. Scheller, and K. Feldmann. 1995. New strategy in the recycling of printed circuit. Circuit World 21(3): 1015.
  • Meskers, C.E.M., A. Kvithyld, M.A. Reuter, and T.A. Engh. 2008. A fundamental metric for metal recycling applied to coated magnesium. Metallurgical and materials transactions 39(3): 500517.
  • Morf, L. and R. Taverna. 2004. Metallische und nichtmetallische Stoffe im Elektronikschrott – Stoffflussanalyse [Metallic and non-metallic substances in electronic scrap – substance flow analysis]. Schriftenreihe Umwelt Nr. 374. Bern : Bundesamt für Umwelt, Wald und Landschaft BUWAL.
  • Organisation for Economic Co-operation and Development (OECD). 2001. Extended Producer Responsibility: A Guidance Manual for Governments. Environment & Sustainable Development 2001(5): 1159.
  • Ravindra, K., L. Bencs, and R. Van Grieken. 2004. Review Platinum group elements in the environment and their health risk. Science of the Total Environment 318(1–3): 143.
  • Reck, B., D.B. Müller, K. Rostkowski, and T.E. Graedel. 2008. The anthropogenic nickel cycle: Insights into use, trade, and recycling. Article and Supporting Information. Environmental Science & Technology 42(9): 33943400.
  • Reuter, M.A., U.M.J. Boin, A. Van Schaik, E. Verhoef, K. Heiskanen, Y. Yang, and G. Georgalli. 2005. The metrics of material and metal ecology: harmonizing the resource, technology and environmental cycles. Amsterdam : Elsevier Science.
  • Reuter, M.A., A. Van Schaik, O. Ignatenko, and G.J. De Haan. 2006. Fundamental limits for the recycling of end-of-life vehicles. Minerals Engineering 19(5): 433449.
  • Reuter, M.A. and A. Van Schaik. 2008. Thermodynamic metrics for measuring the “sustainability” of design for recycling. JOM Journal of the Minerals, Metals and Materials Society 60(8): 3946.
  • Rotter, S. and A. Janz. 2006. Charakterisierung elektrischer und elektronischer Altgeräte (EAG)–1. Teil: Mengenprognosen und und Zusammensetzung von Kleingeräten [Characterisation of small Waste Electric and Electronic Equipment (WEEE) – Part 1: Definition of strategies for separate collection and recycling]. Müll und Abfall (7): 365373.
  • Schmidt, M. 2008. The Sankey diagram in energy and material flow management. Journal of Industrial Ecology 12(2): 173185.
  • Streicher-Porte, M., R. Widmer, A. Jain, H.P. Bader, R. Scheidegger, and S. Kytzia. 2005. Key drivers of the e-scrap recycling system: Assessing and modelling e-scrap processing in the informal sector in Delhi. Environmental Impact Assessment Review 25(5): 472491.
  • Tasaki, T., T. Takasuga, M. Osako and S. Sakai. 2004. Substance flow analysis of brominated flame retardants and related compounds in waste TV sets in Japan. Waste Management 24(6): 571580.
  • Tukker, A., R. Kleijn, L. Oers and E. Smeets. 1997. Combining SFA and LCA. Journal of Industrial Ecology 1(4): 93116.
  • TU Vienna. 2008. Software for Substance Flow Analysis STAN. http://www.iwa.tuwien.ac.at/iwa226_english/stan.html. Accessed August 2008.
  • Udo de Haes, H., R. Heijungs, G. Huppes, E. Van Der Voet and J. Hettelingh. 2000. Full mode and attribution mode in environmental analysis. Journal of Industrial Ecology 4(1): 4556.
  • Umicore Precious Metals Refining (UPMR). 2005. Exploring Sampling and Assaying. Hoboken , Belgium .
  • Unger, N., F. Schneider and S. Salhofer. 2008. A review of ecodesign and environmental assessment tools and their appropriateness for electrical and electronic equipment. Progress in Industrial Ecology 5(1–2): 1329.
  • United States Geological Survey (USGS). 2009. Mineral Commodity Summary 2009. http://minerals.usgs.gov/minerals/pubs/mcs/. Accessed May 2009.
  • Van der Voet, E. 1996. Substance from cradle to grave: development of a methodology for the analysis of substance flows through the economy and the environment of a region. Ph.D. Thesis, Leiden University , Leiden , The Netherlands .
  • Van Schaik, A. and M.A. Reuter. 2004. The optimization of end-of-life vehicle recycling in the European Union. JOM Journal of the Minerals, Metals and Materials Society 56(8): 3947.
  • Van Schaik, A. and M.A. Reuter. 2007. The use of fuzzy rule models to link automotive design to recycling rate calculation. Minerals Engineering 20(9): 875890.
  • Veit, H., C. De Pereira and A. Bernardes. 2002. Using mechanical processing in recycling printed wiring boards. JOM Journal of the Minerals, Metals and Materials Society 54(6): 4547.
  • WEEE-Directive. 2003. Directive 2002/96/EC of the European parliament and of the council of 27 January 2003 on waste electrical and electronic equipment.
  • Widmer, R., H. Oswald-Krapf, D. Sinha-Khetriwal, M. Schnellmann, and H. Böni. 2005. Global perspectives on e-scrap. Environmental Impact Assessment Review 25(5): 436458.