SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Dulal Chandra Saha, InSung Chang, Yeong-Do Park, Heat-affected zone liquation crack on resistance spot welded TWIP steels, Materials Characterization, 2014, 93, 40

    CrossRef

  2. 2
    D.C. Saha, D. Westerbaan, S.S. Nayak, E. Biro, A.P. Gerlich, Y. Zhou, Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels, Materials Science and Engineering: A, 2014, 607, 445

    CrossRef

  3. 3
    B. S. Naik, D. L. Chen, X. Cao, P. Wanjara, Texture Development in a Friction Stir Lap-Welded AZ31B Magnesium Alloy, Metallurgical and Materials Transactions A, 2014, 45, 10, 4333

    CrossRef

  4. 4
    Yijie Liu, Yi Liu, Jining Chen, The impact of the Chinese automotive industry: scenarios based on the national environmental goals, Journal of Cleaner Production, 2014,

    CrossRef

  5. 5
    Anne Marie Lewis, Jarod C. Kelly, Gregory A. Keoleian, Vehicle lightweighting vs. electrification: Life cycle energy and GHG emissions results for diverse powertrain vehicles, Applied Energy, 2014, 126, 13

    CrossRef

  6. 6
    Stina Alriksson, Marianne Henningsson, Why Aren't Advanced High–Strength Steels More Widely Used?, Journal of Industrial Ecology, 2014, 18, 6
  7. 7
    Hyung Chul Kim, Timothy J. Wallington, Life Cycle Assessment of Vehicle Lightweighting: A Physics-Based Model of Mass-Induced Fuel Consumption, Environmental Science & Technology, 2013, 47, 24, 14358

    CrossRef

  8. 8
    Hyung Chul Kim, Timothy J. Wallington, Life-Cycle Energy and Greenhouse Gas Emission Benefits of Lightweighting in Automobiles: Review and Harmonization, Environmental Science & Technology, 2013, 130528153844008

    CrossRef

  9. 9
    W. Xu, D. Westerbaan, S.S. Nayak, D.L. Chen, F. Goodwin, Y. Zhou, Tensile and fatigue properties of fiber laser welded high strength low alloy and DP980 dual-phase steel joints, Materials & Design, 2013, 43, 373

    CrossRef

  10. 10
    W. Xu, L. Liu, Y. Zhou, H. Mori, D.L. Chen, Tensile and fatigue properties of weld-bonded and adhesive-bonded magnesium alloy joints, Materials Science and Engineering: A, 2013, 563, 125

    CrossRef

  11. 11
    Aluminum Recycling, Second Edition, 2013,

    CrossRef

  12. 12
    Gang Liu, Daniel B. Müller, Addressing sustainability in the aluminum industry: a critical review of life cycle assessments, Journal of Cleaner Production, 2012, 35, 108

    CrossRef

  13. 13
    Ahmad Mayyas, Ala Qattawi, Mohammed Omar, Dongri Shan, Design for sustainability in automotive industry: A comprehensive review, Renewable and Sustainable Energy Reviews, 2012, 16, 4, 1845

    CrossRef

  14. 14
    Elisa Alonso, Theresa M. Lee, Catarina Bjelkengren, Richard Roth, Randolph E. Kirchain, Evaluating the Potential for Secondary Mass Savings in Vehicle Lightweighting, Environmental Science & Technology, 2012, 46, 5, 2893

    CrossRef

  15. 15
    S. H. Chowdhury, D. L. Chen, S. D. Bhole, X. Cao, P. Wanjara, Friction Stir Welded AZ31 Magnesium Alloy: Microstructure, Texture, and Tensile Properties, Metallurgical and Materials Transactions A, 2012,

    CrossRef

  16. 16
    Nathan D. MacPherson, Gregory A. Keoleian, Jarod C. Kelly, Fuel Economy and Greenhouse Gas Emissions Labeling for Plug-In Hybrid Vehicles from a Life Cycle Perspective, Journal of Industrial Ecology, 2012, 16, 5
  17. 17
    S.H. Chowdhury, D.L. Chen, S.D. Bhole, X. Cao, P. Wanjara, Lap shear strength and fatigue life of friction stir spot welded AZ31 magnesium and 5754 aluminum alloys, Materials Science and Engineering: A, 2012, 556, 500

    CrossRef

  18. 18
    Gregory A. Keoleian, John L. Sullivan, Materials challenges and opportunities for enhancing the sustainability of automobiles, MRS Bulletin, 2012, 37, 04, 365

    CrossRef

  19. 19
    Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae, Kenichi Nakajima, Tomohiro Tasaki, Tetsuya Nagasaka, Quality- and Dilution Losses in the Recycling of Ferrous Materials from End-of-Life Passenger Cars: Input-Output Analysis under Explicit Consideration of Scrap Quality, Environmental Science & Technology, 2012, 46, 17, 9266

    CrossRef

  20. 20
    Hyung-Ju Kim, Gregory A. Keoleian, Steven J. Skerlos, Economic Assessment of Greenhouse Gas Emissions Reduction by Vehicle Lightweighting Using Aluminum and High-Strength Steel, Journal of Industrial Ecology, 2011, 15, 1
  21. 21
    Gang Liu, Colton E. Bangs, Daniel B. Müller, Unearthing Potentials for Decarbonizing the U.S. Aluminum Cycle, Environmental Science & Technology, 2011, 45, 22, 9515

    CrossRef