SEARCH

SEARCH BY CITATION

References

  • 1
    T. Ishihara, N. M. Sammes, and O. Yamanoto, “Electrolytes”; pp. 83117 in High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications, Edited by S. C.Singhal, and K.Kendall. Elsevier, Oxford, 2003.
  • 2
    A. Mai, V. A. C. Haanappel, S. Uhlenbruck, F. Tietz, and D. Stöver, “Ferrite-Based Perovskites as Cathode Materials for Anode-Supported Solid Oxide Fuel Cells. Part I. Variation of Composition,” Solid State Ionics, 176 [15–16] 134150 (2005).
  • 3
    L. Blum, W. A. Meulenberg, H. Nabielek, and R. Steinberger-Wilckens, “Worldwide SOFC Technology Overview and Benchmark,” Int. J. Appl. Ceram. Technol., 2, 48292 (2005).
  • 4
    D. Stöver, H. P. Buchkremer, and J. P. P. Hujsmans, “MEA/Cell Preparation Methods: Europe/USA”; pp. 101531 in Handbook of Fuel Cells—Fundamentals, Technology and Applications, Vol. 4, Edited by W.Vielstich, H. A.Gasteiger, and A.Lamm. John Wiley & Sons, UK, 2003.
  • 5
    A. A. E. Hassan, N. H. Menzler, G. Blass, H. P. Buchkremer, and D. Stöver, “Development of an Optimized Anode Functional Layer for Solid Oxide Fuel Cell Applications,” Adv. Eng. Mater., 4 [3] 1259 (2002).
  • 6
    K. J. Yoon, W. Huang, G. Ye, S. Gopalan, U. B. Pal, and D. A. Seccombe Jr., “Electrochemical Performance of Solid Oxide Fuel Cells Manufactured by Single Step Co-Firing Process,” J. Electrochem. Soc., 154 [4] B38995 (2007).
  • 7
    K. J. Yoon, S. Gopalan, and U. B. Pal, “One-Step Cofiring of Anode-Supported Planar SOFCs”; Eighth European SOFC Forum, June 30–July 4, 2008, Lucerne, Switzerland, Paper No. A0525.
  • 8
    N. Jordan, W. Assenmacher, S. Uhlenbruck, V. A. C. Haanappel, H. P. Buchkremer, D. Stöver, and W. Mader, “Ce0.8Gd0.2O2−δ Protecting Layers Manufactured by Physical Vapor Deposition for IT-SOFC,” Solid State Ionics, 179 [21-26] 91923 (2008).
  • 9
    R. K. Bordia and R. Raj, “Sintering Behavior of Ceramic Films Constrained by a Rigid Substrate,” J. Am. Ceram. Soc., 68 [6] 28792 (1985).
  • 10
    O. Guillon, L. Weiler, and J. Rödel, “Anisotropic Microstructural Development During the Constrained Sintering of Dip-Coated Alumina Thin Films,” J. Am. Ceram. Soc., 90 [5] 1394400 (2007).
  • 11
    O. Guillon, S. Krauss, and J. Rödel, “Influence of Thickness on the Constrained Sintering of Alumina Films,” J. Eur. Ceram. Soc., 27, 26237 (2007).
  • 12
    J. Kanters, U. Eisele, and J. Rödel, “Cosintering Simulation and Experimentation: Case Study of Nanocrystalline Zirconia,” J. Am. Ceram. Soc., 84 [12] 275763 (2001).
  • 13
    T. Yamaguchi, T. Suzuki, S. Shimizu, Y. Fujishiro, and M. Awano, “Examination of Wet Coating and Co-Sintering Technologies for Micro-SOFCs Fabrication,” J. Membr. Sci., 300, 4550 (2007).
  • 14
    P. Z. Cai, D. J. Green, and G. L. Messing, “Constrained Densification of Alumina/Zirconia Hybrid Laminates, I: Experimental Observations of Processing Defects,” J. Am. Ceram. Soc., 80 [8] 192939 (1997).
  • 15
    G. Q. Ku, R. C. Sutterlin, and T. K. Gupta, “Effect of Mismatched Sintering Kinetics on Camber in a Low-Temperature Cofired Ceramic Package,” J. Am. Ceram. Soc., 76 [8] 190714 (1993).
  • 16
    D. J. Green, O. Guillon, and J. Rödel, “Constrained Sintering: A Delicate Balance of Scales,” J. Eur. Ceram. Soc., 28, 145166 (2008).
  • 17
    R. W. Steinbrech, A. Caron, G. Blass, and F. Dias, “Influence of Sintering Characteristics on Component Curvature of Electrolyte-Coated Anode Substrates”; pp. 72736 in Proceedings of the 5th International Symposium on Solid Oxide Fuel Cells, June 2–5, 1997 in Aachen, Electrochem. Soc. Proc. PV97-18, Pennington, Edited by U.Stimming, S. C.Singhal, H.Tagawa, and W.Lehnert. The Electrochemical Society, Pennington, NJ, 1997.
  • 18
    J.-H. Jean and C.-R. Chang, “Effect of Densification Mismatch on Camber Development during Cofiring of Nickel-Based Multilayer Ceramic Capacitors,” J. Am. Ceram. Soc., 80 [9] 24016 (1997).
  • 19
    P. Z. Cai, D. J. Green, and G. L. Messing, “Constrained Densification of Alumina/Zirconia Hybrid Laminates, II: Viscoelastic Stress Computation,” J. Am. Ceram. Soc., 80 [8] 19408 (1997).
  • 20
    S.-H. Lee, G. L. Messing, and M. Awano, “Sintering Arches for Cosintering Camber-Free SOFC Multilayers,” J. Am. Ceram. Soc., 91 [2] 4217 (2008).
  • 21
    R. Förthmann, G. Blass, and H. P. Buchkremer, “Deposition of Thin Anode and Electrolyte Layers for Medium Operation Temperatures of Solid Oxide Fuel Cells”; pp. 10038 in Proceedings of the 5th International Symposium on Solid Oxide Fuel Cells, 2–5, June, 1997 in Aachen, Electrochem. Soc. Proc. PV97-18, Pennington, Edited by U.Stimming, S. C.Singhal, H.Tagawa, and W.Lehnert. The Electrochemical Society, Pennington, NJ, 1997.
  • 22
    A. A. E. Hassan, N. H. Menzler, G. Blass, M. E. Ali, H. P. Buchkremer, and D. Stöver, “Influence of Alumina Dopant on the Properties of Yttria-Stabilized Zirconia for SOFC Applications,” J. Mater. Sci., 37 [16] 346775 (2002).
  • 23
    R. Mücke, N. H. Menzler, F. Kemnitzer, and K. Blöchl, “Application of Laser Topography in SOFC Development”; Eighth European SOFC Forum, June 30–July 4, 2008, Lucerne, Switzerland, Paper No. A0301.
  • 24
    D. Simwonis, H. Thülen, F. J. Dias, A. Naoumidis, and D. Stöver, “Properties of Ni/YSZ Porous Cermets for SOFC Anode Substrates Prepared by Tape Casting and Coat-Mix® Process,” J. Mater. Process. Technol., 92–93, 10711 (1999).
  • 25
    R. Mücke, N. H. Menzler, H. P. Buchkremer, and D. Stöver, “Sintering of Thin Zirconia SOFC Electrolyte Films”; pp. 217585 in Proceedings of the 10th International Symposium on Solid Oxide Fuel Cells, ECS Transactions, 7,1, Edited by K.Eguchi, S. C.Singhal, H.Yokokawa, and J.Mizusaki. The Electrochemical Society, Pennington, NJ, 2007.
  • 26
    J.-B. Ollagnier, O. Guillon, and J. Rödel, “Effect of Anisotropic Mictrostructure on the Viscous Properties of an LTCC Material,” J. Am. Ceram. Soc., 90 [12] 384651 (2007).
  • 27
    P. Perona and J. Malik, “Scale-Space and Edge Detection Using Anisotropic Diffusion,” IEEE Trans. Pattern Anal. Mach. Intell., 12 [7] 62939 (1990).
  • 28
    H. Su and L. Johnson, “Master Sintering Curve: A Practical Approach to Sintering,” J. Am. Ceram. Soc., 79 [12] 32117 (1996).
  • 29
    S. J. Park, S. H. Chung, D. Blaine, P. Suri, and R. M. German, “Master Sintering Curve Construction Software and its Applications”; pp. 1324 in Advances in Powder Metallurgy and Particulate Materials 2004. Proceedings of the 2004 International Conference on Powder Metallurgy & Particulate Materials, 13—17, June, 2004, Chicago, Edited by R. A.Chernenkoff, and W. B.James. Metal Powder Industries Fed., Princeton, 2004.
  • 30
    R. Mücke, “Sinterung von Zirkoniumdioxid-Elektrolyten im Mehrlagenverbund der oxidkeramischen Brennstoffzelle (SOFC). (Sintering of Zirconia Electrolytes in the Mutli-Layer Compound of Solid Oxide Fuel Cells)”; Ph.D. Thesis, University of Bochum, 2007, Section 4.2.6.
  • 31
    R. Mücke, “Sinterung von Zirkoniumdioxid-Elektrolyten im Mehrlagenverbund der oxidkeramischen Brennstoffzelle (SOFC). (Sintering of Zirconia Electrolytes in the Mutli-Layer Compound of Solid Oxide Fuel Cells)”; Ph.D. Thesis, University of Bochum, 2007, Section 4.5.3
  • 32
    R. K. Bordia and A. Jagota, “Crack Growth and Damage in Constrained Sintering Flims,” J. Am. Ceram. Soc., 76 [10] 247485 (1993).
  • 33
    R. Zuo and J. Rödel, “Temperature Dependence of Constitutive Behaviour for Solid-state Sintering of Alumina,” Acta Mater., 52, 305967 (2004).
  • 34
    H. Moon, S. D. Kim, S. H. Hyun, and H. S. Kim, “Development of IT-SOFC Unit Cells with Anode-Supported Thin Electrolytes Via Tape Casting and Co-Firing,” Int. J. Hydrogen Energy, 33, 175868 (2008).
  • 35
    T. J. Garino and H. K. Bowen, “Kinetics of Constrained-Film Sintering,” J. Am. Ceram. Soc., 73 [2] 2517 (1990).
  • 36
    J. N. Calata, G.-Q. Lu, and T.-J. Chuang, “Constrained Sintering of Glass, Glass–Ceramic and Ceramic Coatings on Metal Substrates,” Surf. Interface Anal., 31, 67381 (2001).
  • 37
    R. K. Bordia, R. Zuo, O. Guillon, S. M. Salamone, and J. Rödel, “Anistropic Constitutive Laws for Sintering Bodies,” Acta Mater., 54, 1118 (2006).
  • 38
    J. Zhao and M. P. Harmer, “Effect of Pore Distribution on Microstructure Development: II, First- and Second-Generation Pores,” J. Am. Ceram. Soc., 71 [7] 5309 (1988).
  • 39
    B. Sudhir and A. H. Chokshi, “Compression Creep Characteristics of 8-Mol%-Yttria-Stabilized Cubic Zirconia,” J. Am. Ceram. Soc., 84 [11] 262532 (2001).
  • 40
    R. K. Bordia and G. W. Scherer, “On Constrained Sintering–III. Rigid Inclusions,” Acta Metall., 36 [9] 24116 (1988).