Get access

Processing of Tellurite-Based Glass with Low OH Content


  • J. Heo—contributing editor

  • This work was financially supported by the Electronic and Optical Materials for Sensors and Survivability Branch of the Materials and Manufacturing Directorate of the Air Force Research Laboratory, AFRL/RXPSO, the Air Force Office of Scientific Research, through contract FA9550-07-1-0567, and also the National Science Foundation, International REU program (#ENG-0649230), whose support of this effort provided international research experiences to the undergraduates (A. H.) participating in this work.

†Author to whom correspondence should be addressed. e-mail:


We report results on the processing and characterization of tellurite-based glass in the TeO2–Bi2O3–ZnO (TBZ) glass family and efforts to reduce their absorption loss due to residual hydroxyl (OH) content. We show that the introduction of alkaline or alkaline earth in the glass network, drying of the batch with fluorine-based raw materials before melting, and melting of the glass in O2-rich atmosphere can lead to a significant reduction in OH content. Employing these steps in TBZ glass processing resulted in a 93% reduction of OH content as compared with a reference composition. The reduction in OH content was verified by a decrease of the absorption band center at 3000 cm−1 as well as a decrease of the free volume in the glass. The addition of F in the glass network was found to reduce the fraction of nonbridging oxygen associated with OH. X-ray fluorescence spectrometry was used to determine the amount of remaining F.

Get access to the full text of this article