SEARCH

SEARCH BY CITATION

FilenameFormatSizeDescription
gwmr1405-sup-0001-AppendixS1.pdfWord 2007 document2253KAppendix S1. Sediment extraction and chemical analysis
gwmr1405-sup-0002-TableS1.pdfPDF document119KTable S1. Primers used for PCR
gwmr1405-sup-0003-TableS2.pdfPDF document97KTable S2. Bulk densities and porosity in the cores
gwmr1405-sup-0004-TableS3.pdfPDF document123KTable S3. The number of vcrA and bvcA DNA and mRNA in groundwater samples from GL. Kongevej
gwmr1405-sup-0005-TableS4.pdfPDF document787KTable S4. The boreholes, the depths, and the identified features in the core samples. Brackets marked features likely were created during extrusion of the core
gwmr1405-sup-0006-TableS5.pdfPDF document135KTable S5. Overview of ERD in clay till at Gl. Kongevej, Sortebrovej, and Rugårdsvej
gwmr1405-sup-0007-TableS6.pdfPDF document114KTable S6. Weighted average of DOD and total mass of TCE over selected depths. The remaining mass (M) in the clay till matrix is calculated assuming that the initial mass (M0) in the source area and plume area, respectively, were the same as found where DOD is close to 0
gwmr1405-sup-0008-TableS7.pdfPDF document97KTable S7. Maximum remaining mass based on DOD as mol%
gwmr1405-sup-0009-FigureS1.pdfPDF document129KFigure S1. Weighted average of DOD and total mass of TCE over selected depths. The remaining mass (M) in the clay till matrix is calculated assuming that the initial mass (M0) in the source and plume, respectively, were the same as found where DOD is close to 0.

Please note: Wiley Blackwell is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.