SEARCH

SEARCH BY CITATION

References

  • Aluminum Assn. 2006. North America aluminum industry—a quick review. Arlington , Va .: Aluminum Assn. Available from: http://www.aluminum.org/Content/NavigationMenu/News_and_Stats/Statistics_Reports/Facts_At_A_Glance/factsataglance05.pdf. Accessed 2007 Jan 10.
  • American Plastics Council. 2004. 2004 National post-consumer plastic recycling report. Arlington , Va .: American Plastics Council. 12 p.
  • American Plastics Council. 2006a. The many uses of plastics. Arlington , Va .: American Plastics Council. Available from: http://www.americanplasticscouncil.org/s_apc/sec.asp?TRACKID=&SID=6&VID=86&CID=312&DID=930. Accessed 2006 Oct 23.
  • American Plastics Council. 2006b. Resin identification codes—plastic recycling codes. Arlington , Va. : American Plastics Council. Available from: http://americanplasticscouncil.org/s_apc/sec.asp?TRACKID=&CID=313&DID=931. Accessed 2006 Oct 23.
  • Arvanitoyannis IS, Bosnea L. 2004. Migration of substances from food packaging materials to foods. Crit Rev Food Sci Nutr 44(3):6376.
  • Auras R, Harte B, Selke S. 2004. An overview of polyactides as packaging materials. Macromol Biosci 4(9):83564.
  • Bastioli C. 2005. Handbook of biodegradable polymers. Toronto-Scarborough , Ontario , Canada : ChemTec Publishing. 533 p.
  • Carolina Recycling Assn. 2002. The bottle bill battle [fact sheet]. Pittsboro , N.C. : Carolina Recycling Assn. 2 p.
  • Codex Alimentarius Commission. 2004. Report of the 20th session of the Codex committee on general principles. Joint FAO/WHO food standards programme. 2004 May 2–7. Paris , France . 44 p.
  • Coles R. 2003. Introduction. In: ColesR, McDowellD, KirwanMJ, editors. Food packaging technology. London , U.K. : Blackwell Publishing, CRC Press. p 131.
  • Container Recycling Inst. 2006a. Beverage container deposit systems in the United States: key features. Washington , D.C. : Container Recycling Inst. Available from: http://www.bottlebill.org/legislation/usa_deposit.htm. Accessed 2007 Jan 9.
  • Container Recycling Inst. 2006b. Bottle bill impact: litter. Washington , D.C. : Container Recycling Inst. Available from: http://www.bottlebill.org/impacts/litter.htm. Accessed 2006 Dec 15.
  • [EPA] Environmental Protection Agency (U.S.). 1989. The solid waste dilemma: an agenda for action. EPA530-SW-89-019. Washington , D.C. : EPA. p 70.
  • [EPA] Environmental Protection Agency (U.S.). 1990. Characterization of municipal solid waste in the United States: 1990 update. EPA530-SW-90-042. Washington , D.C. : EPA.
  • [EPA] Environmental Protection Agency (U.S.). 1997. Landfill reclamation. EPA530-F-97-001. Washington , D.C. : EPA. p 8.
  • [EPA] Environmental Protection Agency (U.S.). 2002. Solid waste management: a local challenge with global impacts. EPA530-F-02-026. Washington , D.C. : EPA. p 5.
  • [EPA] Environmental Protection Agency (U.S.). 2004. WasteWise 2004 annual report—sustaining excellence. EPA530-R-04-035. Washington , D.C. : EPA. p 13.
  • [EPA] Environmental Protection Agency (U.S.). 2005. WasteWise 2005 annual report—forging ahead. EPA530-R-05-021. Washington , D.C. : EPA. p 13.
  • [EPA] Environmental Protection Agency (U.S.). 2006a. Municipal solid waste in the United States: 2005 facts and figures. EPA530-R-06-011. Washington , D.C. : EPA. p 153.
  • [EPA] Environmental Protection Agency (U.S.). 2006b. Plastics. Washington , D.C. : EPA. Available from: http://www.epa.gov/epaoswer/non-hw/muncpl/plastic.htm. Accessed 2006 Oct 26.
  • [EPA] Environmental Protection Agency (U.S.). 2006c. Bioreactors. Washington , D.C. : EPA. Available from: http://www.epa.gov/epaoswer/non-hw/muncpl/landfill/bioreactors.htm. Accessed 2006 Nov 30.
  • European Union. 2005. Directive 2005/84/EC. Available from: http://europa.eu.int/eur-ex/lex/LexUriServ/site/en/oj/2005/l_344/l_34420051227en00400043.pdf. Accessed 2006 Oct 26.
  • [FAO] Food and Agriculture Organization of the United Nations. 1989. Prevention of post-harvest food losses: fruits, vegetables, and root crops. A training manual. Rome , Italy : FAO. Code: 17, AGRIS: J11, ISBN 92-5-102766-8.
  • [FDA] Food and Drug Administration (U.S.). 2002. PVC devices containing plasticizer DEHP [FDA public health notification]. 2002 July 12. Washington , D.C. : FDA.
  • Fellows P, Axtell B. 2002. Packaging materials. In: FellowsP, AxtellB, editors. Appropriate food packaging: materials and methods for small businesses. Essex , U.K. : ITDG Publishing. p 2577.
  • Girling PJ. 2003. Packaging of food in glass containers. In: ColesR, McDowellD, KirwanMJ, editors. Food packaging technology. London , U.K. : Blackwell Publishing, CRC Press. p 15273.
  • Golan E, Krissoff B, Kuchler F, Calvin L, Nelson K, Price G. 2004. Traceability in the U.S. food supply: economic theory and industry studies. Agricultural economic report nr 830. Washington , DC : Economic Research Service, U.S. Dept. of Agriculture. 48 p.
  • [HHS] Dept. of Health and Human Services (U.S.). 2005. Report on carcinogens. 11th ed. Research Triangle Park , N.C. : National Toxicology Program, Public Health Service, HHS .
  • Hotchkiss JJ. 1997. Food-packaging interactions influencing quality and safety. Food Addit Contam 14(6-7):6017.
  • Hunt RG, Sellers VR, Frankalin WE, Nelson JM, Rathje WL, Hughes WW, Wilson DC. 1990. Estimates of the volume of MSW and selected components in trash cans and land fills. Tucson , Ariz. : Report prepared by The Garbage Project and Franklins Assn. Ltd. for the Council for Solid Waste Solutions .
  • [IFT] Institute of Food Technologists. 1988. Migration of toxicants, flavors, and odor-active substances from flexible packaging materials to food [IFT scientific status summary]. Risch SJ, author. Food Tech 42(7):95102.
  • [IFT] Institute of Food Technologists. 1991. Effective management of food packaging: from production to disposal [IFT scientific status summary]. Marsh KS, author. Food Tech 45(5):22534.
  • [IFT] Institute of Food Technologists. 1997. Edible and biodegradable polymer films: challenges and opportunities [IFT scientific status summary]. Krochta JM, DeMulder-Johnston C, authors. Food Tech 51(2):6174.
  • Kirwan MJ. 2003. Paper and paperboard packaging. In: ColesR, McDowellD, KirwanMJ, editors. Food packaging technology. London , U.K. : Blackwell Publishing, CRC Press. p 24181.
  • Kirwan MJ, Strawbridge JW. 2003. Plastics in food packaging. In: ColesR, McDowellD, KirwanMJ, editors. Food packaging technology. London , U.K. : Blackwell Publishing, CRC Press. p 174240.
  • Kiser JVL. 2004. Beneficial waste-to-energy ash usage. In: KiserJVL, ZannesM. The 2004 IWSA directory of waste-to-energy plants. Washington , D.C. : Integrated Waste Services Association . p 48.
  • Kiser JVL, Zannes M. 2004. The 2004 IWSA directory of waste-to-energy plants. Washington , D.C. : Integrated Waste Services Association. p 31.
  • Lau OW, Wong SK. 2000. Contamination in food from packaging materials. J Chrom. A 882(1–2):25570.
  • Lopez-Rubio A, Almenar E, Hernandez-Munoz P, Lagaron JM, Catala R, Gavara R. 2004. Overview of active polymer-based packaging technologies for food application. Food Rev Int 20(4):35787.
  • Marsh KS. 1993. Packaging as a supplier of health, filler of landfills, and excuse for trade barriers [abstract]. In: International symposium on packaging, economic development and the environment, 1992 Nov 9, Chicago Ill. Herndon, Va .: Inst. of Packaging Professionals . p 2336.
  • McDonough W, Braungart M. 2002. Cradle to cradle: remaking the way we make things. New York : North Point Press. 212 p.
  • McKown C. 2000. Containers. In: Coatings on glass—technology roadmap workshop. 2000 Jan 18–19. Livermore , Calif : Sandia National Laboratories report . p 810.
  • Miles DC, Briston JH. 1965. Polymer technology. New York : Chemical Publishing Co. Inc. 444 p.
  • Miller C. 1993. Waste product profile: steel cans. Waste Age January 1993. p 69.
  • Page B, Edwards M, May N. 2003. Metal cans. In: ColesR, McDowellD, KirwanMJ, editors. Food packaging technology. London , U.K. : Blackwell Publishing, CRC Press. p 12151.
  • Rathje WL, Reilly MD, Hughes WW. 1985. Household garbage and the role of packaging—the United States/Mexico City household refuse comparison. Tucson , Ariz. : Solid Waste Council of the Paper Industry Publishing. p 116.
  • Raymond Communications. 2005. U.S. recycling laws: state by state guide. College Park , Md. : Raymond Communications Inc. Publishing. 168 p.
  • Raymond Communications. 2006. Recycling laws international Vol. 12. [electronic subscription]. College Park , Md. : Raymond Communications Inc. Publishing.
  • Sacharow S, Griffin Jr. RC. 1980. The evolution of food packaging. In: SacharowS, GriffinJr. RC, editors. Principles of food packaging. 2nd ed. Westport , Conn. : AVI Publishing Co. Inc. p 161.
  • Shea KM. 2003. Pediatric exposure and potential toxicity of phthalate plasticizers. Pediatrics 111(6):146774.
  • Smith C, White P. 2000. Life cycle assessment of packaging. In: LevyGM, editor. Packaging, policy, and the environment. Gaithersburg , Md. : Aspen. p 178204.
  • Soroka W. 1999. Paper and paperboard. In: EmblemA, EmblemH, editors. Fundamentals of packaging technology. 2nd ed. Herndon , Va. : Inst. of Packaging Professionals. p 95112.
  • Stilwell EJ, Canty RC, Kopf PW, Montrone AM. 1991. Packaging for the environment: a partnership for progress. New York : American Management Assn. (Amacom) Publishing. 262 p.
  • Tehrany EA, Desobry S. 2004. Partition coefficient in food/packaging systems: a review. Food Addit Contam 21(12):1186202.
  • Tharanathan RN. 2003. Biodegradable films and composite coatings: past, present and future. Trends Food Sci Tech 14(3):718.
  • Van Willige RWG, Linssen JPH, Meinders MBJ, Van Der Steger HJ, Voragen AGJ. 2002. Influence of flavor absorption on oxygen permeation through LDPE, PP, PC and PET plastics food packaging. Food Addit Contam 19(3):30313.
  • Vom Saal FS, Hughes C. 2005. An extensive new literature concerning low-dose effects of bisphenol A shows the need for a new risk assessment. Environ Health Perspect 113(8): 92633.