• 1
    Thompson MC, Thompson KM, Swain M. The all-ceramic, inlay supported fixed partial denture. Part 1. Ceramic inlay preparation design: a literature review. Aust Dent J 2010;55:120127.
  • 2
    Timoshenko SP. History of strength of materials. New York: McGraw-Hill, 1953.
  • 3
    Kelly JR. Ceramics in restorative and prosthetic dentistry. Ann Rev Mater Sci 1997;27:443468.
  • 4
    Green DJ. An introduction into the mechanical properties of ceramics. Cambridge University Press, 1998.
  • 5
    Lawn B. Fracture of brittle solids. Cambridge University Press, 1993.
  • 6
    Jadaan O, Nemthm N. Transient reliability of ceramic structures. Fatigue Fract Engng Mater Struct 2001;24:475487.
  • 7
    Ritter JE. Predicting the lifetimes of materials and material structures. Dent Mater 1995;11:142146.
  • 8
    Castellani D, Baccetti T, Giovannoni A, Berardini UD. Resistance to fracture of metal ceramic and all-ceramic crowns. Int J Prosthodont 1994;7:149154.
  • 9
    Weibull W. A statistical theory of the strength of materials. Ingeniors Vetenskaps Akademien, Handlingar 1939;151:4555.
  • 10
    Weibull W. A statistical distribution function of wide applicability. J Appl Mech 1951;18:293297.
  • 11
    Magne P, Belser U. Understanding the intact tooth and the biomimetic principle. In: MagneP, BelserU, eds. Bonded porcelain restorations in the anterior dentition – a biomimetic approach. Chicago: Quintessence Publishing Co., 2002:2355.
  • 12
    Kou W, Kou S, Liu H, Sjögren G. Numerical modeling of the fracture process in a three-unit all-ceramic fixed partial denture. Dent Mater 2007;23:10421049.
  • 13
    Oh WS, Anusavice KJ. Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures. J Prosthet Dent 2002;87:536542.
  • 14
    Fischer H, Weber M, Marx R. Lifetime prediction of all-ceramic bridges by computational methods. J Dent Res 2003;82:238242.
  • 15
    Hino T. A mechanical study on new ceramic crowns and bridges for clinical use. J Osaka Uni Dent Soc 1990;35:240267.
  • 16
    Hojjatie B, Anusavice KJ. Three-dimensional FEA of glass-ceramic dental crowns. J Biomech 1990;23:11571166.
  • 17
    Kamposiora P, Papavasiliou G, Bayne SC, Felton DA. Stress concentration in all-ceramic posterior fixed partial dentures. Quintessence Int 2000;27:701706.
  • 18
    Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in vitro and in vivo; analysis and modeling. J Dent Res 1995;74:12531258.
  • 19
    Kolbeck C, Rosentritt M, Behr M, Handel G. In vitro examination of the fracture strength of 3 different fibre-reinforced composite and 1 all-ceramic posterior inlay FPD systems. J Prosthodont 2002;11:248253.
  • 20
    Magne P, Perakis N, Belser U, Krejci I. Stress distribution of inlay-anchored adhesive fixed partial dentures: a finite element analysis of the influence of restorative materials and abutment preparation design. J Prosthet Dent 2002;87:516527.
  • 21
    Nakamura T, Ohyama T, Imanishi A, Nakamura T, Ishigaki S. Fracture resistance of pressable glass-ceramic fixed partial dentures. J Oral Rehabil 2002;29:951955.
  • 22
    Oh WS, Götzen N, Anusavice KJ. Influence of connector design on the fracture probability of ceramic fixed partial dentures. J Dent Res 2002;81:623627.
  • 23
    Plengsombut K, Brewew J, Monaco E, Davis E. Effect of two connector designs on the fracture resistance of all-ceramic core materials for fixed partial dentures. J Prosthet Dent 2009;101:166173.
  • 24
    Pospiech P, Rammelsberg P, Goldhofer G, Gernet W. All-ceramic resin-bonded bridges. Eur J Oral Sci 1996;104:390395.
  • 25
    Sorensen JA, Cruz M, Mito WT, Raffeiner O, Meredith HR, Foser HP. A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic. Pract Periodontics Aesthet Dent 1999;11:95106.
  • 26
    Sorensen JA, Kang SK, Torres TJ, Knode H. In-ceram fixed partial dentures: three-year clinical trial results. J Calif Dent Assoc 1998;26:207214.
  • 27
    Sundh A, Molin M, Sjögren JA. Fracture resistance of yttria oxide partially stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater 2005;21:476482.
  • 28
    Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 1999;81:652661.
  • 29
    Burke FJ. Maximising the fracture resistance of dentine-bonded all-ceramic crowns. J Dent 1999;27:169173.
  • 30
    Kelly JR, Campbell SD, Bowen HK. Fracture surface analysis of dental ceramics. J Prosthet Dent 1989;62:536561.
  • 31
    Li ZC, White SN. Mechanical properties of dental luting cements. J Prosthet Dent 1999;81:597609.
  • 32
    Rosentritt M, Plein T, Kolbeck C, Behr M. In vitro fracture force and marginal adaptation of ceramic crowns fixed on natural and artificial teeth. Int J Prosthodont 2000;13:387391.
  • 33
    Scherrer SS, de Rijk WG. The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont 1993;6:462467.
  • 34
    Edelhoff D, Özcan M. To what extent does the longevity of fixed dental prosthesis depend on the function of the cement. Clin Oral Implants Res 2007;18:193204.
  • 35
    Kappert HF, Knode H, Schultheiss R. Strength of the In-Ceram system under mechanical loads and thermocycling in artificial saliva. Dtsch Zahanärztl Z 1991;46:129131.
  • 36
    Wolfart S, Ludwig K, Uphaus A, Kern M. Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures. Dent Mater 2007;23:15131520.
  • 37
    Plengsombut K, Brewer J, Monaco E, Davis E. Effect of two connector designs on the fracture resistance of all-ceramic core materials for fixed partial dentures. J Prosthet Dent 2009;101:166173.
  • 38
    Kiliçarslan M, Kedici P, Küçkeşmen H, Uludağ B. In vitro fracture resistance of posterior metal-ceramic and all-ceramic inlay-retained resin-bonded FPDs. J Prosthet Dent 2004;92:365370.
  • 39
    Qualtrough JE, Wilson NH. A 3-year clinical evaluation of a porcelain inlay system. J Dent 1996;24:317323.
  • 40
    Peterson IM, Pajares A, Lawn BJ, Thompson VP, Rekow ED. Mechanical characterization of dental ceramics by Hertzian contacts. J Dent Res 1998;77:589602.
  • 41
    Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 1999;81:652661.
  • 42
    Hellmich C, Perilli E, Schileo E, Taddei F, Brynjólfsson S, Viceconti M. Mathematical relationships between bone density and mechanical properties: a literature review. Ann Biomed Eng 2008;36:108122.
  • 43
    Park HS, Lee YJ, Jeong SH, Kwon TG. Density of the alveolar and basal bones of the maxilla and the mandible. Am J Orthod Dentofacial Orthop 2008;133:3037.
  • 44
    Gibbs C, Mahan P, Lundeen H. Occlusal forces during mastication and swallowing as measured by sound tramsmission. J Prosthet Dent 1981;46:443449.
  • 45
    Bourauel C, Vollmer D, Jager A. Application of bone remodelling theories in the simulation of orthodontic tooth movements. J Orofac Orthop 2000;61:266279.
  • 46
    Vollmer D, Bourauel C, Maier K, Jager A. Determination of the centre of resistance in an upper human canine and idealised tooth model. Eur J Orthod 1999;21:633648.
  • 47
    O’Brien WJ. Dental materials and their selection. Quintessence Pub Co., 2002.
  • 48
    Riley W, Sturges L, Morris D. Mechanics of materials. John Wiley and Sons, 2006.
  • 49
    Hagberg C. Assessments of bite force: a review. J Craniomandib Disord 1987;1:162169.
  • 50
    Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2004;92:557562.