1. The Standardised Major Axis Tests and Routines (SMATR) software provides tools for estimation and inference about allometric lines, currently widely used in ecology and evolution.

2. This paper describes some significant improvements to the functionality of the package, now available on R in smatr version 3.

3. New inclusions in the package include sma and ma functions that accept formula input and perform the key inference tasks; multiple comparisons; graphical methods for visualising data and checking (S)MA assumptions; robust (S)MA estimation and inference tools.

Biologists often wish to estimate how one variable scales against another and to test hypotheses about the nature of this relationship and how it varies across samples. The most common example of this is allometry (Reiss 1989); hence, we refer to this problem as one of estimation and testing about allometric lines. An example is given in Fig. 1a, where we wish to understand how leaf lifespan (longev) scales against leaf mass per area (lma) and how this relationship changes across sites with different rainfall (rain). longev and lma are log-transformed prior to analysis and are approximately linearly related on the transformed scale. This is common in allometry, and it means that their relationship approximately follows a power law, longev=alma^{b}. The ‘scaling exponent’b is the slope on log-transformed axes, and the magnitude of this parameter describes how steep the leaf lifespan–leaf mass per area relationship is. The ‘proportionality coefficient’a, related to the elevation on log–log axes, is needed to understand how long-lived leaves of a given mass per area will be.

Estimating a and b is not a simple linear regression problem because we are not interested in predicting one variable from another – we are interested in estimating some underlying line of best fit (Warton et al., 2006 ). Another way to understand this is to see that the problem is symmetric – the basic problem does not change if we plot lma on the Y axis instead of the X axis (Smith 2009). Hence, the appropriate methods for analysis have more in common with principal component analysis, a multivariate approach, than with linear regression (Warton et al., 2006). Common approaches to estimating the line of best fit are standardised major axis (SMA) and major axis (MA) estimation, which will be collectively referred to as (S)MA, and which are widely used in ecology and evolution.

Warton et al. (2006) reviewed (S)MA techniques, proposed routines for comparing the parameters a and b amongst groups and developed software to implement the methods. The Standardised Major Axis Tests and Routines (SMATR) software, available in both R (R Development Core Team 2010) and C++, has since been used in over 200 publications. We have made significant improvements to the software in the recently released version 3 of the smatrR package, and this paper briefly describes this new functionality.

Formula input via the sma and ma functions

The new sma and ma functions are the key access point to the smatr package, performing all the available estimation and inference tasks. These functions behave similarly to the lm function used in R for linear regression, taking a formula as the primary input argument. The type of task to be performed is determined by the formula that is used in the function call. Some of the more common types of tasks that can be performed using sma or ma are summarised schematically in Fig. 2 and listed below.

1sma(y∼x) will fit a SMA (for y against x) and return confidence intervals for the slope and elevation (Pitman 1939; Warton et al., 2006).

2sma(y∼x*groups) will test for common slope (Warton & Weber 2002) amongst several SMAs (for y against x), fitted separately for each level of the factor groups.

3sma(y∼x+groups) will test for common elevation (Warton et al., 2006) amongst several SMAs (for y against x), fitted with common slope but with separate elevations for each level of the factor groups.

The last two calls in the above perform a SMA equivalent of analysis of covariance (Sokal & Rohlf 1995), and the function calls are written in an analogous form to how this would be done for linear regression using the lm function. To use MA estimation instead of SMA estimation, the ma function is used instead of sma, which works in exactly the same way.

Additional arguments can be specified to perform some additional tasks:

1sma(y∼x, slope.test=B) will test the hypothesis that the SMA (for y against x) has slope B (Pitman 1939). The most common use of this command is to test for isometry, which usually implies a slope of one (Warton et al., 2006). If groups is specified in the formula, results will be reported for a simultaneous test of whether the true slope is B for all groups, as well as separate results for each group.

2sma(y∼x+groups, shift=T) will test the hypothesis that several SMAs of common slope are centred on the same location along the SMA (Warton et al., 2006).

3 The argument multcomp=T, when used in comparing multiple lines, will return pairwise comparisons of slopes (or elevations or locations along common-slope SMAs), and multcompmethod=“adjust” will use adjusted P-values (via the ‘Sidak adjust-ment’, Westfall & Young, 1993) to control family-wise error rate in a conservative way.

4 The argument intercept=F, used in combination with most of the above functions, will force lines through the origin. This is necessary, for example, when analysing phylogenetically independent contrasts (Felsenstein 1985). The only situation in which this argument cannot be used is when testing for common elevation, because in that case, it is no longer applicable.

5 The argument log=“xy” will log _{10}-transform variables prior to analysis.

The output from any sma or ma call can be saved to an object (of type ‘sma’) for use in combination with generic R functions as below.

Graphing data

Applying the plot function to a sma object will by default produce a scatterplot with a (S)MA line added to the plot, or with multiple lines if appropriate. The argument log=“xy” (in sma or plot) will ensure that the plot is on the log–log scale. A new function defineAxis can be used to customise tick spacing and axis labels. For example, Fig. 1a was produced using the following code:

ft < sma(longev∼lma*rain, log=“xy”)

xax < defineAxis(major.ticks = c(80,160,320))

yax < defineAxis(major.ticks = c(0.5,1,2,4))

plot(ft, xaxis=xax, yaxis=yax)

Checking assumptions

The plot function can also be used to produce residual plots, to check the critical assumptions of linearity and equal variance at all fitted values (via a residuals vs. fitted values plot, Fig. 1b) and the assumption of normally distributed residuals (via a normal quantile plot, Fig. 1c). Normality can be important for inference when sample size is small. Figure 1b,c was generated using the following commands:

summary, coef, ... General-purpose functions such as summary, coef, print will now work with ma and sma objects, so that these functions can be used in just the same way as they can with lm objects. This will make the use of the smatr package more intuitive for those who are already familiar with linear regression modelling in R via lm.

Robust estimation

Standard methods of line fitting, including (S)MA methods, do not perform well in the presence of outliers (Taskinen & Warton 2011). A new robust option enables estimation of and inference about (S)MA in a manner that is insensitive to outliers, by adding robust=T to a sma or ma function call, e.g. sma(y∼x, robust=T). This method uses Huber's M estimation in place of least squares (Taskinen & Warton 2011). The method is currently only available when fitting a single line, and in future work, we plan to extend the robust approach to inference tasks involving several (S)MAs.

For more details, see the documentation associated with the package, which can be downloaded from the CRAN website http://cran.r-project.org/.

Acknowledgements

D.I.W. and D.S.F. are supported by the Australian Research Council, via the Discovery (project number DP0987729) and Laureate Fellow (FL100100080, awarded to Mark Westoby) schemes, and S.T. is supported by the Academy of Finland. Thanks to Ian Wright for data. For feedback that improved the manuscript and software, thanks to Brian Sidlauskas, an anonymous reviewer and editor.