Get access

Fatigue Crack Growth Behavior of Silicon Nitride: Roles of Grain Aspect Ratio and Intergranular Film Composition

Authors


Author to whom correspondence should be addressed. e-mail: jamie.kruzic@oregonstate.edu

Abstract

The role of microstructure in affecting the fatigue crack growth resistance of grain bridging silicon nitride ceramics doped with rare earth (RE = Y, La, Lu) oxide sintering additives was investigated. Three silicon nitride ceramics were prepared using MgO-RE2O3 and results were compared with a commercial Al2O3-Y2O3-doped material. Decreasing stress intensity range (ΔK) fatigue tests were conducted using compact-tension specimens to measure steady-state fatigue crack growth rates. Specimens doped with MgO-RE2O3 additives showed a significantly higher resistance to crack growth than those with Al2O3-Y2O3 additives and this difference was attributed to the much higher grain aspect ratio for the MgO-RE2O3-doped ceramics. When the crack growth data were normalized with respect to the total contribution of toughening by bridging determined from the monotonically loaded R-curves, the differences in fatigue resistance were greatly reduced with the data overlapping considerably. Finally, all of the MgO-RE2O3-doped silicon nitrides displayed similar steady-state fatigue crack growth behavior suggesting that they are relatively insensitive to the intergranular film.

Get access to the full text of this article

Ancillary