SEARCH

SEARCH BY CITATION

Summary

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information

The peptidoglycan (PG) sacculus, a meshwork of polysaccharide strands cross-linked by short peptides, protects bacterial cells against osmotic lysis. To enlarge this covalently closed macromolecule, PG hydrolases must break peptide cross-links in the meshwork to allow insertion of new glycan strands between the existing ones. In the rod-shaped bacterium Bacillus subtilis, cell wall elongation requires two redundant endopeptidases, CwlO and LytE. However, it is not known how these potentially autolytic enzymes are regulated to prevent lethal breaches in the cell wall. Here, we show that the ATP-binding cassette transporter-like FtsEX complex is required for CwlO activity. In Escherichia coli, FtsEX is thought to harness ATP hydrolysis to activate unrelated PG hydrolases during cell division. Consistent with this regulatory scheme, B. subtilis FtsE mutants that are unable to bind or hydrolyse ATP cannot activate CwlO. Finally, we show that in cells depleted of both CwlO and LytE, the PG synthetic machinery continues moving circumferentially until cell lysis, suggesting that cross-link cleavage is not required for glycan strand polymerization. Overall, our data support a model in which the FtsEX complex is a remarkably flexible regulatory module capable of controlling a diverse set of PG hydrolases during growth and division in different organisms.


Introduction

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information

Most bacteria surround themselves with a cell wall exoskeleton composed of peptidoglycan (PG). This macromolecule is assembled from glycan strands cross-linked to one another by short peptides to form a three-dimensional meshwork that encapsulates the cytoplasmic membrane, provides cell shape, and protects the cell from osmotic lysis. In rod-shaped bacteria, the polysaccharide strands are thought to be arranged perpendicular to the long axis of the cell, wrapping around the cylinder with peptide cross-bridges linking the glycan ‘hoops’ together (Gan et al., 2008; Beeby et al., 2013). Bacterial growth is intimately tied to cleavage and expansion of the covalently closed PG meshwork. To enlarge this matrix, bonds connecting the glycan strands must be broken to incorporate new strands between the existing ones (Weidel and Pelzer, 1964). PG hydrolases play a central role in this process, but their activities must be tightly regulated to prevent excessive degradation of the cell wall and the generation of lethal breaches in this protective layer. The specific enzymes that are responsible for enlarging the cell wall during growth in Escherichia coli and Bacillus subtilis have recently been identified (Bisicchia et al., 2007; Hashimoto et al., 2012; Singh et al., 2012). However, the mechanisms by which they are regulated have remained mysterious. An understanding of these regulatory systems is likely to reveal new ways to subvert PG biogenesis for therapeutic intervention.

Much has been learned about PG hydrolase regulation in recent years from studies of cell division in the Gram-negative model organism E. coli. During cytokinesis, new cell wall is synthesized in the wake of the constricting inner membrane (Burdett and Murray, 1974a,b; Olijhoek et al., 1982). This new septal PG material is initially shared between the developing daughter cells and must be split shortly after it is made to allow outer membrane constriction to closely follow that of the inner membrane (Vollmer et al., 2008). Septal PG splitting is mediated by three PG amidases (AmiA, AmiB, and AmiC) (Heidrich et al., 2002; Priyadarshini et al., 2007), which are in turn regulated by two LytM-domain-containing proteins (EnvC and NlpD) at the cytokinetic ring (Uehara et al., 2010). The LytM domains of these factors lack the catalytic residues normally conserved in LytM-like proteins with PG metalloendopeptidase activity. Thus, EnvC and NlpD are thought to be degenerate LytM factors that have lost catalytic activity and instead activate PG hydrolysis by their cognate amidases. AmiA and AmiB are activated by EnvC, while AmiC is activated by NlpD (Uehara et al., 2010). Just as the PG hydrolases must be tightly controlled, their activation by the LytM factors is also likely to be the target of extensive regulation. While the mechanism of NlpD regulation remains unknown, recent studies have revealed that EnvC is regulated by FtsEX, an ATP-binding cassette (ABC) transporter-like complex that forms part of the septal ring division machine (Yang et al., 2011). FtsE is the ATPase and FtsX is the transmembrane domain subunit of the complex. FtsEX recruits EnvC to the septal ring through an interaction between a coiled-coil domain on EnvC and a periplasmic loop of FtsX. Importantly, FtsEX mutants predicted to disrupt ATPase activity still recruit EnvC to the division site but are unable to stimulate amidase activity to promote septal PG splitting. These results suggest that EnvC-dependent activation of cell wall hydrolases at the outer face of the inner membrane is regulated by conformational changes in the FtsEX complex mediated by ATP hydrolysis in the cytoplasm (Yang et al., 2011). A similar pathway appears to function during cell division in the Gram-positive ovococcus Streptococcus pneumoniae (Sham et al., 2011). In this case, FtsEX appears to control the activity of PcsB, a factor that shares a similar domain structure with EnvC, possessing an N-terminal coiled-coil domain and a C-terminal PG hydrolase-like domain. However, instead of a LytM domain, the PG hydrolase-like domain of PcsB belongs to the CHAP (cysteine- and histidine-dependent aminohydrolase/peptidase) family (Bateman and Rawlings, 2003). It is currently unclear whether PcsB directly cleaves PG or if, like EnvC, it has lost catalytic activity and functions as an activator of other PG hydrolases.

The results in E. coli and S. pneumoniae suggest a conserved role for FtsEX in the regulation of PG hydrolase activity during cell division. However, in the rod-shaped Gram-positive organism B. subtilis, mutants lacking FtsEX divide normally (Garti-Levi et al., 2008), indicating that the complex is dispensable for division. Here, we implicate B. subtilis FtsEX in the control of PG hydrolase activity required for cell elongation. In this organism, two functionally redundant DL-endopeptidases (LytE and CwlO) that cleave peptide cross-bridges are required for cell wall elongation (Bisicchia et al., 2007; Hashimoto et al., 2012). Cells lacking either one of these enzymes are viable, but the inactivation of both is lethal. Depletion of one of these hydrolases in the absence of the other generates short cells that ultimately lyse, indicating that they are critical for expansion of the meshwork during growth. Interestingly, CwlO has a domain organization that resembles that of EnvC and PcsB in that it possesses a coiled-coil domain preceding its NlpC/P60 DL-endopeptidase domain. We therefore suspected that it might be the target of FtsEX regulation in B. subtilis. Here, we show that B. subtilis ftsEX is indeed in a genetic pathway with cwlO. Cells lacking FtsEX and CwlO have indistinguishable phenotypes and both are synthetically lethal with lytE mutants. Furthermore, variants of FtsE that are predicted to be ATPase-defective phenocopy loss of function mutations in ftsE and cwlO. Interestingly, cell surface association of CwlO requires its coiled-coil domain but not FtsX, suggesting that an additional protein functions in this regulatory pathway. Finally, we show that inactivation of CwlO and LytE fails to arrest the directed movement of the cell wall synthetic machinery prior to lysis, consistent with a ‘make-before-break’ model for PG synthesis in this organism. Overall, our data provide evidence that the FtsEX ABC transporter-like complex is a flexible regulatory module that is employed by different bacteria to control diverse PG hydrolases involved in both cell elongation and division. Another paper in this issue (Dominguez-Cuevas et al., 2013) describes an independent study with similar and complementary results to those described here.

Results

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information

FtsEX is a component of the CwlO peptidoglycan hydrolysis pathway

LytE and CwlO have similar C-terminal DL-endopeptidase domains but have different N-terminal domains (Ishikawa et al., 1998; Margot et al., 1998; Yamaguchi et al., 2004). LytE contains three LysM domains, a common peptidoglycan-binding motif found in PG hydrolases and other cell surface-associated proteins (Buist et al., 2008). CwlO, on the other hand, has two predicted coiled-coil domains at its N-terminus (Fig. 1A). In both E. coli and S. pneumoniae, FtsEX is linked to a PG hydrolytic activity through a coiled-coil domain suggesting that CwlO might be similarly connected to FtsEX (Sham et al., 2011; Yang et al., 2011). This led us to examine how many additional PG hydrolases in B. subtilis contain coiled-coil domains. Interestingly, CwlO appears to be the only one (data not shown). We further discovered an intriguing genomic association between ftsEX and genes encoding coiled-coil-containing PG hydrolases (Fig. 1B). In E. coli and most other proteobacteria, ftsEX and envC homologues are found in different regions of the chromosome. This is also the case for ftsEX and cwlO in B. subtilis and many other Firmicutes, including ftsEX and pcsB in S. pneumoniae. However, in epsilon-proteobacteria, like H. pylori and C. jejuni, an envC homologue that encodes a coiled-coil domain fused to a degenerate LytM domain is found immediately downstream of ftsEX (Fig. 1B). Moreover, in a subset of Firmicutes, a gene encoding a PG hydrolase with a coiled-coil domain is found adjacent to ftsEX. In B. licheniformis and B. pumilus, a gene encoding a coiled-coil-containing LytM with intact catalytic residues lies immediately downstream of ftsEX, while cwlO is present elsewhere in the genome. A similar genomic organization of ftsEX and lytM is found in B. halodurans and B. clausii, however cwlO appears to be absent from these bacteria. In Clostridium beijerinkii, cwlO is immediately upstream of ftsEX; in Listeria monocytogenes, ftsEX is immediately followed by cwlO and lytM in tandem (Fig. 1B). Finally, a genetic screen for suppressors of a chemokine that kills Bacillus anthracis identified mutations in ftsX and a gene that encodes a CwlO homologue (Crawford et al., 2011). Based on this genetic connection, the genomic associations, the predicted coiled-coil domains in CwlO, and the current models for FtsEX function, we hypothesized that FtsEX is a component of the CwlO PG hydrolysis pathway in B. subtilis.

figure

Figure 1. Bioinformatic analysis linking FtsEX and CwlO.

A. Coiled-coil prediction for CwlO using COILS (Bioinformatics Toolkit, Max-Planck Institute for Developmental Biology). The predictions were made using 14, 21, and 28 residue windows (shown in green, blue and red respectively).

B. Genomic context of ftsEX in diverse bacteria. ftsE and ftsX are coloured light and dark blue respectively. Genes encoding predicted coiled-coil containing LytM proteins with degenerate (e.g. E. colienvC) and conserved active site residues are coloured light and dark purple respectively. Genes encoding CwlO homologues with predicted coiled-coil are coloured orange. pcsB encoding a CHAPS-domain with a coiled-coil is coloured yellow.

Download figure to PowerPoint

To investigate whether FtsEX is necessary for CwlO activity, we took advantage of the synthetic lethality of lytE and cwlO mutants. If FtsEX is required for CwlO function, then ftsEX mutants should also be synthetically lethal with a lytE mutant. We constructed a strain containing a lytE null mutant and a conditional lytE allele under the control of an IPTG-inducible promoter. We then transformed cwlO or ftsEX deletions into this strain in the presence of IPTG to induce the expression of lytE. Both strains grew as well as the parental strain in the presence of inducer. However, when grown in the absence of IPTG, both double mutants suffered a complete loss of viability (Fig. 2A). Similarly, all strains grew equally well in liquid culture in the presence of IPTG, but the strains lacking ftsEX and cwlO both stopped growing within 60 min after its removal (Fig. 2B). After longer incubation in the absence of IPTG, the cells began to lyse. Immunoblot analysis revealed that CwlO levels were unaffected in the absence of FtsEX (not shown and see below). Finally, an in-frame deletion of ftsE and an insertion-deletion of ftsX displayed similar synthetic phenotypes with the lytE mutant (Fig. 2A), indicating that both the putative ATP binding protein FtsE and its cognate transmembrane protein FtsX are necessary for CwlO function.

figure

Figure 2. FtsEX and CwlO are in the same PG hydrolysis pathway.

A. Synthetic lethality of ftsEX and lytE mutants. Spot dilutions of the indicated strains in the presence and absence of inducer. Strains were grown in medium supplemented with 1 mM IPTG. Culture densities were normalized, serially diluted 10-fold, and 5 μl from each dilution was spotted onto LB agar plates with or without IPTG.

B. Cessation of growth following LytE depletion in an ftsEX mutant. Parental strain ΔlytE, Pspank-lytE (strain BJM386, squares), ΔcwlO, ΔlytE, Pspank-lytE (strain BJM495, circles), and ΔftsEX, ΔlytE, Pspank-lytE (strain BJM493, triangles) were grown in CH medium supplemented with 1 mM IPTG at 37°C to mid-exponential phase, washed with medium lacking IPTG and inoculated in CH medium without IPTG (time 0). Cell densities (OD600) were monitored every 20 min.

C. Specificity of the ftsEX-lytE synthetic lethality. Spot dilutions of indicated strains in the presence and absence of inducer as described in (A).

D. Cells lacking CwlO, FtsEX, or both have the same cytological phenotypes. Indicated strains were grown in CH medium at 37°C to mid-exponential phase and visualized by phase-contrast (top) and fluorescence (bottom) microscopy using the membrane stain TMA-DPH. Mean cell lengths from 2–3 experiments and standard deviation between experiments as are shown. Scale bar indicates 1 μm.

Download figure to PowerPoint

To assess the specificity of the ftsEX-lytE synthetic lethality, we generated mutants in several DL-endopeptidases and tested them for synthetic phenotypes with an ftsEX null mutant. To do so, we constructed a strain with an ftsEX deletion and an IPTG-inducible allele of ftsEX. We transformed this strain with deletions in lytE, cwlO, lytF or cwlS. Only the lytE deletion was inviable in the absence of ftsEX induction (Fig. 2C). All the other mutants grew indistinguishably from the parental strain. Thus, the synthetic lethality in cells lacking ftsEX and lytE is specific and not a general feature of DL-endopeptidase mutants.

If cwlO and ftsEX are in the same genetic pathway as our data suggest, then strains harbouring mutations in cwlO and separately in ftsEX should have similar phenotypes to each other and to the cwlO, ftsEX double mutant. It has been reported previously that cells lacking FtsEX are shorter than wild-type (Garti-Levi et al., 2008). Accordingly, we directly compared the cytological phenotypes of cwlO and ftsEX mutants. The cells were grown in rich medium and analysed by fluorescence microscopy using the membrane dye TMA-DPH. The single cwlO and ftsEX mutants and the double mutant indeed shared very similar morphological phenotypes. The mutant cells were shorter and wider than wild-type and often slightly bent or curved (Garti-Levi et al., 2008). Moreover, quantitative analysis using cytoplasmic mCherry fluorescence revealed that the single and double mutants were similar to each other in cell length and width (Figs 2D and S1). For comparison, we also analysed cells lacking lytE. The lytE mutant was virtually indistinguishable from wild-type with respect to cell size and shape, but as reported previously (Ishikawa et al., 1998) had a mild cell separation defect with a slightly higher proportion of cells present in chains (Figs 2D and S1 and data not shown). Altogether, these results indicate that cwlO and ftsEX reside in the same genetic pathway, and support the idea that FtsEX is specifically required for the endopeptidase activity of CwlO.

FtsEX is involved in cell elongation in B. subtilis

Classical genetic screens in E. coli identified conditional mutants that fail to undergo cell division and form long, filamentous cells (Van De Putte et al., 1964). The mutants were appropriately named fts for filamentous temperature-sensitive. Based on this nomenclature and subsequent studies of FtsEX in E. coli (and S. pneumoniae), it would be expected that B. subtilis FtsEX is also involved in cell division. However, the original description of the ftsEX mutant phenotype in B. subtilis (Garti-Levi et al., 2008) and the genetic and cytological analysis presented above appear to challenge that expectation. To more clearly discriminate between an involvement in cell elongation and cell division, we monitored the effects of FtsEX depletion in a ΔlytE mutant by time-lapse microscopy. To aid in our quantitative analysis of cell length and division, the strain constitutively expressed mCherry to label the cell cytoplasm. The cells were initially grown in rich medium at 37°C in the presence of IPTG to induce expression of FtsEX. Under these conditions, cell growth ceases 120 min after removal of inducer (not shown). Accordingly, the cells were grown in shaking culture for 60 min after removal of IPTG prior to mounting on agarose pads. The cells were then monitored by time-lapse microscopy at 32°C. The parental strain, a lytE mutant that contained wild-type ftsEX, doubled in cell length and underwent division approximately every 60 min (Fig. 3A upper panels). By contrast, depletion of FtsEX in cells lacking lytE, caused a decrease in cell elongation but did not significantly affect cell division (Fig. 3A lower panels). As a result, the cells shortened during the course of the experiment. Quantitative analysis revealed a steady decrease in average cell length (Fig. 3B). Further incubation in the absence of inducer resulted in cell bulging and bending and ultimately lysis (Fig. 3A and C). Similar results were obtained in a lytE mutant in which CwlO was depleted (Figs 3B and C, and S2). These results provide strong evidence that, despite its name, B. subtilis FtsEX functions in cell elongation rather than cell division. Furthermore, these results provide additional support for the idea that FtsEX regulates CwlO endopeptidase activity to promote expansion of the PG meshwork along the cell cylinder.

figure

Figure 3. FtsEX is required for cell elongation.

A. Time-lapse fluorescence microscopy of ΔlytE (BJM186) (upper) and ΔlytE, ΔftsEX, Pspank-ftsEX (BJM754) (lower). To facilitate quantitative image analysis, both strains harbour mCherry expressed under constitutive control to label the cytoplasm. Cells were grown in CH medium supplemented with 1 mM IPTG at 37°C to mid-exponential phase, washed with medium lacking IPTG and inoculated in CH medium. After 1 h of growth in shaking flasks, cells were mounted on agarose pads in a humidified incubator at 32°C and visualized by phase-contrast and fluorescence microscopy every 5 min for 3 h. Merged images of phase-contrast and cytoplasmic mCherry (top) and mCherry (bottom) are shown. Cell division without significant elongation upon FtsEX depletion is highlighted (yellow caret). Examples of cell lysis are indicated (white caret).

B. Quantitative analysis of cell length during depletion of FtsEX and CwlO. Cytoplasmic mCherry images from the time-lapse movies were analysed using MicrobeTracker to assess cell length. More than 400 cells were analysed for each time point. Strains were wild-type (BJM172), ΔlytE (BJM186), ΔlytE, ΔftsEX, Pspank-ftsEX (BJM754) and ΔlytE, ΔcwlO, Pspank-cwlO (BJM692). Because the cells were grown for 1 h in the absence of inducer before imaging, the strains undergoing depletion of FtsEX and CwlO are already shorter at the first time point.

C. Quantitative analysis of cell lysis during depletion of FtsEX and CwlO in cells lacking LytE. Phase-contrast and mCherry images from the time-lapse movies were analysed for lysis. More than 400 cells were analysed for each time point.

Download figure to PowerPoint

The stress-response transcription factor σI is required in the absence of the FtsEX

Devine and co-workers recently provided evidence that the CwlO is the primary DL-endopeptidase in vegetative cells, while LytE becomes important when cells experience envelope stress (Salzberg et al., 2013). This model was based on the observation that lytE expression is, in part, controlled by the stress-response sigma factor σI (Tseng et al., 2011). Furthermore, a sigI deletion was found to be synthetically lethal with a cwlO mutant and this lethality could be suppressed by ectopic expression of lytE (Salzberg et al., 2013). Our results showing that ftsEX is in the same genetic pathway as cwlO predict that ftsEX and sigI should also be a synthetic lethal pair. To test this, we constructed a sigI mutant with conditional alleles of ftsEX and cwlO. As expected, in the presence of IPTG, the strains were indistinguishable from SigI+ cells but in the absence of inducer they were both inviable (Fig. 4A). Interestingly, in liquid culture, depletion of CwlO or FtsEX resulted in a more rapid cessation of growth and lysis in the sigI mutant than in cells lacking lytE (Fig. 4B and data not shown). We interpret this to mean that σI controls genes in addition to lytE that contribute to cell envelope integrity. These results provide further support for the idea that FtsEX and CwlO function in the same pathway and that this is the primary hydrolytic pathway for cell elongation during vegetative growth.

figure

Figure 4. FtsEX and CwlO mutants have indistinguishable phenotypes.

A. Synthetic lethality of ftsEX and sigI mutants. Spot dilutions as described in Fig. 2 of the indicated strains in the presence and absence of inducer.

B. Cessation of growth following CwlO depletion in cells lacking, lytE, sigI and mreBH. ΔcwlO, Pspank-cwlO (strain BJM433), ΔlytE, ΔcwlO, Pspank-cwlO (strain BJM406), ΔsigI, ΔcwlO, Pspank-cwlO (strain BJM967) and ΔmreBH, ΔcwlO, Pspank-cwlO (strain BJM969) were grown in CH medium supplemented with 1 mM IPTG to mid-exponential phase, washed with medium lacking IPTG and inoculated in CH medium without IPTG (time 0). Cell densities were monitored every 20 min.

C. CwlO and FtsEX mutants are delayed in polar division during spore formation. Fluorescent images of cells stained with the membrane dye TMA-DPH at the indicated times after the initiation of sporulation. Strains were wild-type (BJM874), ΔftsEX (BJM900), ΔcwlO (BJM902), ΔlytE (BJM898).

D. Cells lacking CwlO or FtsEX are delayed in the activation of the Spo0A transcription factor. The strains in (C) with a Spo0A-responsive promoter (PspoIIE) fused to lacZ were analysed for β-galactosidase activity at the indicated times after resuspension in sporulation medium.

Download figure to PowerPoint

The FtsEX-CwlO pathway is necessary for efficient entry into sporulation

Cells lacking FtsEX are delayed in entry into the morphological process of sporulation (Garti-Levi et al., 2008). Specifically, asymmetric cell division is retarded and this can be attributed to a delay in the activation of the master transcriptional regulator Spo0A. Based on its similarity to ABC transporters, FtsEX was proposed to import an environmental signal required to trigger timely Spo0A activation. To investigate whether FtsEX has a second unrelated function involved in entry into sporulation or the observed defect was related to its role in regulating PG hydrolysis, we compared sporulating cells lacking ftsEX or cwlO. Synchronous sporulation was induced by nutrient downshift and polar division was monitored by fluorescence microscopy using the membrane dye TMA-DPH. We observed a similar delay in asymmetric division in the two mutants compared with wild-type and cells lacking LytE (Fig. 4C). Two hours after initiation of sporulation, 38% and 44% (n > 1500) of the wild-type and ΔlytE mutants, respectively, had undergone asymmetric division, as compared with 20% and 28% (n > 1500) of the ΔcwlO and ΔftsEX mutant cells. At hour 3, 58% and 61% (n > 1500) of wild-type and the ΔlytE mutant cells, respectively, had completed asymmetric division compared with 40% and 52% (n > 1500) of the ΔcwlO and ΔftsEX mutants. Consistent with the idea that FtsEX and CwlO act in the same pathway, a similar delay was observed in the double mutant (not shown). To more precisely assess the timing of Spo0A activation, we monitored a Spo0A-responsive promoter (PspoIIE) fused to lacZ. Activation was delayed by approximately 30 min in both ΔftsEX and ΔcwlO mutants compared with wild-type and the ΔlytE mutant (Fig. 4D). Taken together, these results suggest that the role of FtsEX in promoting efficient entry into sporulation is through its regulation of CwlO.

ATP binding and hydrolysis by FtsE is required for CwlO function

FtsEX is a member of the ATP-binding cassette (ABC) transporter superfamily. ABC transporters use the chemical energy of ATP hydrolysis to induce conformational changes that promote transport or regulate diverse physiological processes (Higgins, 1992; Rees et al., 2009). These transporters consist of two nucleotide-binding domains (NBD) and two transmembrane domains (TMD). Each domain can exist as a separate protein; NBD and TMD can be joined to make half-transporter proteins; or all four domains can be present in a single polypeptide. The NBD has one set of highly conserved residues that bind ATP and another that catalyse hydrolysis. In the case of FtsEX, FtsE possesses the NBD while FtsX contains four transmembrane segments. Work in E. coli and S. pneumoniae suggest that FtsEX does not translocate substrates across the membrane but rather is involved in coupling PG hydrolysis to division-associated activities (Arends et al., 2009). Amino acid substitutions in FtsE that are predicted to abrogate nucleotide binding and hydrolysis are unable to stimulate septal PG hydrolysis in E. coli (Yang et al., 2011). To investigate whether B. subtilis FtsE activity is similarly required for CwlO function, we generated mutants in conserved residues involved in ATP binding (K41) and hydrolysis (D162). In support of the idea that both nucleotide binding and hydrolysis are important for activating CwlO, these mutants failed to complement an ftsE deletion and were synthetic lethal with a ΔlytE mutant (Fig. 5A). Importantly, the mutant FtsE proteins accumulated to levels within twofold of wild-type (Fig. 5B).

figure

Figure 5. FtsE mutants predicted to disrupt ATP binding and hydrolysis are required for CwlO activity.

A. Point mutants in FtsE that are predicted to impair ATP binding and hydrolysis are synthetic lethal with ΔlytE. Spot dilutions as described in Fig. 2 in the presence and absence of inducer. Indicated strains harboured a deletion of ftsEX at its native locus and a wild-type or mutant copy at an ectopic site (amyE).

B. Immunoblot analysis of wild type and FtsE mutant proteins. Cytoplasmic ClpX was analysed to control for loading.

Download figure to PowerPoint

Cell surface-association of CwlO depends on its coiled-coil domain but is independent of FtsX

FtsX contains four TM segments with two extracellular loops. The coiled-coil domains of EnvC (E. coli) and PcsB (S. pneumoniae) have been shown to interact with the first extracellular loop (loop 1) between TM segments one and two, and this interaction is important for anchoring EnvC and PcsB to the outer face of the cytoplasmic membrane (Sham et al., 2011; Yang et al., 2011). Accordingly, we wondered whether B. subtilis FtsX also promotes the association of CwlO with the cell surface. To investigate this, we monitored the presence of CwlO in whole cell lysates and the culture supernatant. Immunoblot analysis revealed that in wild-type cells approximately 60% of CwlO is cell-associated and 40% is shed into the media (Fig. 6A). Importantly, there was no significant change in the amount of CwlO in the culture supernatant in the presence or absence of FtsX. To rule out the possibility that CwlO remained cell-associated through an interaction with the cell wall rather than at the membrane surface, we degraded the PG with lysozyme in hypertonic buffer generating protoplasts (Fig. 6B). After centrifugation, the presence of CwlO in the supernatant and the protoplast pellet was assessed by immunoblot. All the surface-associated CwlO that was present prior to lysozyme digestion remained associated with the protoplasts and virtually none was present in the supernatant (Fig. 6B). Importantly, the CwlO associated with the protoplasts was susceptible to proteolysis by proteinase K while two cytoplasmic proteins were not, indicating that CwlO was located on the outside of the cell membrane.

figure

Figure 6. The CwlO coiled-coil domain is necessary for cell surface association.

A. Surface association of CwlO does not depend on FtsX. Wild-type (BJM001) and strains lacking cwlO (BJM054) and ftsX (BJM072) were grown in LB medium to mid-exponential phase. Equivalent amounts of whole cell lysate (WC) and cell culture supernatant (CS) (concentrated by trichloroacetic acid precipitation) were separated by SDS-PAGE and CwlO and cytoplasmic ClpX were assessed by immunoblot analysis.

B. Surface association of CwlO in the absence of peptidoglycan cell wall and FtsX. Mid-exponential phase cells (wild-type BJM001and ΔftsX BJM072) were treated with lysozyme in hypertonic medium to generate protoplasts. Equivalent amounts of whole cell lysates (WC), protoplast lysates (P), and protoplast supernatants (PS) from wild-type and ΔftsX were separated by SDS-PAGE. To determine whether CwlO was located on the outside of the cell, intact protoplasts and protoplasts disrupted with Triton X-100 were treated with proteinase K (P + proK and P + proK+TriX100 respectively). All samples were analysed by immunoblot for CwlO (top), ClpX (middle) and Spo0J (a second cytoplasmic control protein, bottom). Phase-contrast images of cells before and after treatment with lysozyme are shown below.

C. Surface association of CwlO requires its amino-terminal coiled-coil domain. Wild-type (BJM001), ΔcwlO (BJM054), and strains lacking cwlO harbouring an IPTG-inducible cwlO gene (BJM372) or cwlO lacking its coiled-coil domain (BJM929) were grown in LB medium supplemented with 1 mM IPTG to mid-exponential phase. Equivalent amounts of whole cell lysates (WC) and cell culture supernatants (CS) were separated by SDS-PAGE and analysed by Western blot with anti-CwlO antiserum. Purified recombinant CwlO lacking its N-terminal coiled-coil (and 40 additional residues) was included as a positive control.

Download figure to PowerPoint

Finally, to determine if surface association of CwlO depends on its coiled-coil domain, we engineered strains that express full-length CwlO and a coiled-coil deletion mutant (CwlOΔCC) and monitored the amount of CwlO shed into the cell supernatant. Strikingly, virtually all the CwlOΔCC mutant protein was present in the culture medium (Fig. 6C). Taken together, these results indicate that CwlO is retained at the outer surface of the cytoplasmic membrane via an interaction that requires its coiled-coil domain, but that this association does not require FtsX. This observation suggests that an as yet unidentified factor may be interacting with and participating in CwlO regulation in addition to FtsX. Furthermore, the interaction of CwlO with this factor may be required for CwlO to interface with FtsX. Consistent with this proposal, we were unable to detect an interaction between FtsX and purified CwlO in vitro using protein-protein interaction assays with purified full-length FtsX reconstituted into membrane nanodiscs or the soluble extracellular loop 1 (Fig. S3). Furthermore, we failed to detect a significant interaction between loop 1 of FtsX and CwlO in a bacterial two-hybrid assay (not shown).

The cell wall elongation machinery moves in a directed and circumferential manner independently of CwlO and LytE activity

In E. coli, it was recently shown that three functionally redundant DD-endopeptidases that cleave cross-linked stem peptides are required for cell wall elongation. Furthermore, upon their depletion cell wall synthesis ceases (Singh et al., 2012). These observations are consistent with the idea that in E. coli synthetic and degradative activities are coupled to growth and suggest that cleavage of the peptide cross-links is a prerequisite for new PG synthesis (Burman and Park, 1984). Gram-positive bacteria, like B. subtilis, have a more complex multilayered PG meshwork with synthesis of new cell wall occurring at the membrane surface in an inside-to-outside growth mechanism (Koch and Doyle, 1985). The current view is that synthesis and cross-linking of the new material into the meshwork occurs prior to cleavage of old linkages in a so-called ‘make-before-break’ mode of synthesis (Koch et al., 1981). We therefore wondered whether or not PG synthesis in B. subtilis depends on the elongation endopeptidases CwlO and LytE. To investigate this, we took advantage of our ability to monitor the directed movement of the PG elongation machinery by time-lapse fluorescence microscopy in B. subtilis (Garner et al., 2011). We have shown previously that this movement abruptly ceases upon addition of beta-lactams and other cell wall synthesis inhibitors, suggesting that it is reporting on PG synthesis. To monitor the dynamic movement of the cell wall synthetic complex, we used a GFP fusion to Mbl (GFP–Mbl). Mbl is one of the three filament-forming MreB isoforms in B. subtilis that function as a scaffold for the PG synthetic machinery (Jones et al., 2001). We introduced a xylose-inducible gfp-mbl fusion at an ectopic locus in a strain lacking both LytE and FtsEX that harboured an IPTG-inducible allele of ftsEX. Cells were initially grown in rich medium at 37°C in the presence of IPTG. They were then washed with medium lacking inducer and grown in medium with 10 mM xylose to induce expression of GFP–Mbl. After 2 h of FtsEX depletion, the cells were spotted on an agarose pad and GFP–Mbl was imaged by fluorescence microscopy. GFP–Mbl was also monitored in a control strain lacking LytE. As observed previously, in the control strain GFP–Mbl moved in a directed manner perpendicular to the long axis of the cell (Fig. 7A and Movie S1). This movement is difficult to discern in the still images but it can be seen in the kymographs in Fig. 7 and in the Movie in supplemental material. In cells depleted of FtsEX, there was significant heterogeneity in cell size and shape and in the appearance of the GFP–Mbl foci. However, GFP–Mbl foci moved in a directed, circumferential manner until cell lysis, even in significantly shorter, bulged and bent cells (Fig. 7B and Movies S2–S4). The kymographs in Fig. 7B show two cells one in which the synthetic machinery moves for the entire movie and another in which movement continues until lysis. Notably, we did not observe a cessation of GFP–Mbl movement prior to lysis as was found in strains in which components of the PG synthetic machinery were depleted (e.g. RodA, RodZ, PbpA and PbpH) or upon treatment with antibiotics that inhibit PG synthesis (Garner et al., 2011). Similar results were obtained in strains lacking LytE in which we depleted CwlO (not shown). Collectively, these results indicate that the elongation mode of PG synthesis continues unabated when the two elongation cell wall hydrolases are inactivated until the cells lyse. Thus, our findings are consistent with the idea that PG synthesis can occur even in the absence of the endopeptidases required for cell wall elongation. As such, they favour the make-before-break model of cell wall elongation in B. subtilis.

figure

Figure 7. Depletion of PG hydrolase activity does not arrest the cell wall synthetic machinery. Time-lapse images of GFP–Mbl in ΔlytE, PxylA-gfp-mbl (BJM1007, panel A) and ΔlytE, ΔftsEX Pspank-ftsEX, PxylA-gfp-mbl (BJM839, panel B). Cells were grown in CH medium supplemented with 1 mM IPTG at 37°C to mid-exponential phase, washed with medium lacking IPTG and inoculated in CH medium. After 120 min of growth in shaking flasks cells were immobilized on agarose pads and then visualized by fluorescence microscopy every 5 s for 250 s at 32°C. Dynamic movement can be seen in the still images or in the kymographs that represent 50 images over 250 s. Representative cells in which GFP–Mbl foci move for the entire movie and an example in which signal is lost at the time of lysis are indicated (red caret). Scale bar indicates 1 μm.

Download figure to PowerPoint

Discussion

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information

FtsEX is a flexible regulatory module for the control of PG hydrolysis

Growth and division in bacteria involve a highly choreographed interplay between synthesis and degradation of the PG layer. To expand this covalently closed meshwork during growth, hydrolases must cleave peptide cross-links to allow for the synthesis and/or incorporation of new material. The mechanisms responsible for controlling these processing enzymes to prevent the formation of lethal breaches in the wall are only just beginning to be uncovered. In B. subtilis, two functionally redundant DL-endopeptidases are the principal enzymes required for cell wall elongation. Here, we provide evidence that one of them, CwlO, is regulated by the FtsEX ABC transporter-like complex. Our results highlight the versatility of this ABC system for regulating diverse families of PG hydrolases during different phases of growth.

By analogy to the proposed role of FtsEX in E. coli and S. pneumoniae in cytokinesis (Sham et al., 2011; Yang et al., 2011), we envision that conformational changes in the complex mediated by ATP hydrolysis in the cytoplasm activates CwlO-dependent cleavage of peptide cross-bridges between the glycan strands during growth (Fig. 8A). In the case of EnvC in E. coli and PcsB in S. pneumoniae, the coiled-coil domains of these proteins were found to specifically interact with the extracytoplasmic loop of FtsX, and this interaction is likely critical for the regulation of these factors by the FtsEX complex. We were unable to detect a direct interaction between CwlO and this loop, but suspect this is because the interaction is augmented by another membrane-associated partner in the B. subtilis system resulting in a lower affinity between the isolated domains. Nevertheless, the most likely scenario is that CwlO is also controlled by FtsX via a mechanism analogous to the regulation of EnvC and PcsB (Fig. 8A). In support of this idea, an interaction between CwlO and FtsX has been observed by Errington and co-workers (Dominguez-Cuevas et al., 2013).

figure

Figure 8. FtsEX is a flexible regulatory module.

A. Schematic diagram of FtsEX and its regulatory pathway in E. coli, S. pneumoniae, and B. subtilis. FtsE-dependent ATP hydrolysis in the cytoplasm triggers PG hydrolysis outside the cell. A hypothetical membrane anchored protein (white) that holds CwlO at the cell surface is included. The hypothesized interaction between CwlO and FtsX is indicated with a question mark.

B. Schematic 3-dimensional diagrams of cell wall biogenesis during growth in B. subtilis. The PG layer adjacent to the cell membrane is shown in dark green while the other layers are represented schematically in light green. A newly synthesized glycan strand that has been cross-linked to adjacent older strands is shown in red. Peptide cross-link cleavage is shown (in hot pink) followed by incorporation of the new strand into the existing layer.

C. Comparison of multilayer PG during elongation in Gram (+) bacteria (left) and division in Gram (−) bacteria (right). Colour scheme for glycan strands and peptide cross-links is the same as in (B).

D. Proposed model for the regulation of diverse PG hydrolases by the FtsEX complex. Conformational changes in FtsEX (blue) mediated by ATP hydrolysis triggers a physical repositioning of the coiled-coil containing hydrolase such that it extends through the membrane proximal PG layer (not shown) to process membrane-distal cross-links.

Download figure to PowerPoint

FtsEX has now been implicated in the regulation of three different PG hydrolase families belonging to two different structural classes: EnvC with a LytM domain, and PcsB and CwlO with CHAP and NlpC/P60 domains respectively (Firczuk and Bochtler, 2007). Our results also indicate that in addition to controlling cell division in some organisms, FtsEX participates in the regulation of PG cleavage during the elongation phase of growth in Bacillus species. Interestingly, according to the prevailing views of the respective processes, the topology of the PG cleavage events required for daughter cell separation and for the insertion of new glycan strands into the stress-bearing layer of PG in Gram-positive bacteria are remarkably similar (Fig. 8B and C). In both cases, the PG is thought to be multilayered, and the PG hydrolases are tasked with cleaving membrane-distal PG layers while leaving the membrane-proximal material intact. Given the similarity of the cleavage events and the fact that FtsEX can interface with a variety of PG hydrolases or PG hydrolase-like effectors, the regulatory mechanism employed is likely to be relatively simple and flexible. We favour a model in which the long, coiled-coil domains anchor the different PG hydrolases to the cell surface at least in part via the interaction with FtsX and position them such that the PG layers are just out of reach. We envision that conformational changes in FtsEX mediated by ATP hydrolysis triggers a physical repositioning of the enzymes such that they extend through the membrane proximal PG layer to process membrane-distal cross-links (Fig. 8D). If this model is correct, virtually any PG hydrolase domain appended to the appropriate coiled-coil could be controlled by this conserved regulatory module. However, an additional layer of regulatory control that might exist on top of this simple model is an autoinhibitory role for the coiled-coil domain in regulating the activity of the C-terminal PG hydrolase or PG hydrolase-like effector (Yang et al., 2011).

Co-ordinating PG hydrolysis by CwlO with the synthetic machinery

In E. coli and S. pneumoniae, the FtsEX complex is linked to the divisome and therefore could be sensing the constriction of the FtsZ (tubulin) cytokinetic ring and/or the status of its PG synthases in order to transduce this information to PG hydrolases at the cell surface (Yang et al., 2011). We suspect that because of its role in cell elongation, FtsEX in B. subtilis is similarly interfacing with the actin-directed cell elongation machinery to co-ordinate PG hydrolysis by CwlO with the polymerization status of the MreB/Mbl/MreBH polymers or the activity of its associated PG synthetic enzymes. In support of this model, Errington and co-workers have recently shown that FtsEX can be chemically cross-linked to complexes that contain the three MreB isoforms in vivo (Kawai et al., 2011). Intriguingly, an FtsX–GFP fusion was also previously shown to localize as foci in the peripheral membrane in a pattern reminiscent of other components the PG synthetic machinery (Garti-Levi et al., 2008). However, this fusion does was shown to be non-functional (Garti-Levi et al., 2008) and in our hands did not support growth in the absence of LytE. Our inability to generate functional fluorescent fusions to FtsE, FtsX, or CwlO has prevented us from monitoring their dynamics to assess whether they associate with the elongation machinery and move with it. Thus, improved tools will be needed to assess the precise spatiotemporal connections between the FtsEX-CwlO system and the PG elongation machinery.

PG synthesis during elongation in E. coli and B. subtilis

Recent work in E. coli has defined three functionally redundant endopeptidases required for cell wall elongation (Singh et al., 2012). In support of the idea that cell wall synthesis is intimately coupled to PG processing in E. coli, depletion of these PG hydrolases results in a significant reduction in cell wall synthesis prior to lysis as assessed by monitoring the incorporation of radio-labelled meso-diaminopimelic acid (mDAP) into the sacculus. These observations are consistent with a model in which cleavage of the peptide cross-bridges is necessary for continued synthesis and the insertion of new glycan strands between existing ones in the meshwork. Thus, the hydrolases in this case can be considered to function as ‘space-makers’ working in advance of a synthetic system travelling in their wake (Burman and Park, 1984). Such a model is readily compatible with the thin, largely single-layered PG matrix found in E. coli and other Gram-negative bacteria. The situation is likely to be very different in Gram-positive bacteria like B. subtilis, which have to expand a thick multilayered PG sacculus via an inside-to-outside growth mechanism (Koch and Doyle, 1985). This mode of growth is thought to involve the synthesis of new PG material underneath the stress-bearing layers before subsequent cleavage events promote the movement of this material into the stress bearing structure (Fig. 8B) (Koch et al., 1981). Consistent with this make-before-break mode of synthesis, our data indicate that the cell wall synthetic machinery continues to move circumferentially until lysis upon inactivation of the essential elongation hydrolases CwlO and LytE.

Interestingly, and consistent with the differences between the likely modes of growth between Gram-negative and Gram-positive PG, the PG hydrolases required for elongation in the different organisms have distinct cleavage specificities with important implications for the incorporation of new material. In E. coli, the elongation enzymes are DD-endopeptidases that cleave the same bond that forms the cross-links between peptides on adjacent strands (between the meso-diaminopimelic acid of one peptide and the d-alanine of the other) (Singh et al., 2012). In cleaving this bond, both stem peptides retain the ability to serve as acceptors for cross-links with newly synthesized strands. Thus, enzymes with this specificity can easily act in advance of synthesis. By contrast, CwlO and LytE are DL-endopeptidases that cleave the bond between γ-D-glutamate and diaminopimelic acid within the stem peptide (Ishikawa et al., 1998; Yamaguchi et al., 2004). Because mDAP is lost from the peptide following such a cleavage, it cannot participate in cross-links with new material. Thus, the B. subtilis elongation endopeptidases are more suited for PG cleavage events that facilitate incorporation of previously cross-linked material into a pre-existing stress bearing layer (Fig. 8B).

Regulation of LytE and other PG hydrolases

Less is known about how the second elongation DL-endopeptidase, LytE, is regulated. Previous work has suggested that the MreB isoform MreBH directs LytE to sites of new cell wall synthesis (Carballido-Lopez et al., 2006). Intriguingly, LytE and MreBH are both under σI control (Tseng and Shaw, 2008; Tseng et al., 2011). If MreBH is indeed required for LytE activity then MreBH mutants would be predicted to display synthetic interactions with mutants in CwlO and FtsEX. However, we did not observe a significant impact on cell growth when either of these proteins was depleted in cells lacking MreBH (Fig. 4A and B). Accordingly, if MreBH and LytE are indeed in a common regulatory pathway, other MreB isoforms are likely able to at least partially compensate for the absence of MreBH.

In addition to cell elongation, LytE has been implicated in PG degradation during cell division where it promotes cell separation (Ishikawa et al., 1998). Mutants with LytE defects display a mild chaining phenotype, and LytE inactivation strongly enhances the cell separation phenotype of mutants defective in LytF (Ohnishi et al., 1999). Cleavage of PG during cell separation in B. subtilis has markedly different spatial characteristics from hydrolysis during cell wall elongation. With its thick PG matrix, the layers to be cleaved for separation are likely to be several layers away from the cell membrane and the peptide cross-links are unlikely to be load bearing and consequently not under stress. This arrangement raises the possibility that the principal function of LytE in cell wall elongation is breaking bonds at a distance from the membrane to shed the outer layers that are no longer load bearing. In the context of this model, LytE could compensate for CwlO mutants by cleaving load-bearing cross-links (albeit inefficiently) in transit through the meshwork. Although this activity is sufficient to support elongation of the PG, it is likely not ideal and could account for the shorter and wider cell morphology associated with cells lacking CwlO and/or FtsEX. Irrespective of the precise substrate of LytE, the mechanism by which its PG hydrolytic activity is controlled remains to be elucidated. The range of different PG hydrolases typically encoded by bacterial genomes suggests that FtsEX is but one of many possible PG hydrolase regulatory systems. We anticipate that these systems will prove to be just as diverse and varied as the enzymes they control.

Experimental procedures

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information

General methods

All B. subtilis strains were derived from the prototrophic strain PY79 (Youngman et al., 1983). Unless otherwise indicated, cells were grown in LB or CH medium at 37°C. Sporulation was induced by resuspension according to the method of Sterlini-Mandelstam (Harwood and Cutting, 1990). β-Galactosidase assays were performed as described previously (Rudner et al., 1999). Insertion-deletion mutations were generated by isothermal assembly (Gibson, 2011) of PCR products followed by direct transformation into B. subtilis. Protoplasts were generated at room temperature in hypertonic medium (0.5 M sucrose, 20 mM maleic acid pH 6.5, and 20 mM MgCl2) with 0.5 mg ml−1 lysozyme. Protoplasts were disrupted with Triton X-100 at a final concentration of 0.1%. Proteinase K (final concentration 50 μg ml−1) was used to determine protease accessibility of CwlO. Tables of strains, plasmids and oligonucleotide primers and a description of strain and plasmid construction can be found online as supplementary data (Tables S1, S2 and S3, and Text S1).

Immunoblot analysis

Whole cell lysates from vegetatively growing cells were prepared as described (Doan and Rudner, 2007). Samples were heated for 10 min at 55°C prior to loading. Equivalent loading was based on OD600 at the time of harvest. Proteins were separated by SDS-PAGE on 12.5% polyacrylamide gels, electroblotted onto Immobilon-P membranes (Millipore) and blocked in 5% non-fat milk in phosphate-buffered saline (PBS)-0.5% Tween-20. The blocked membranes were probed with anti-FtsE (1:10 000), anti-CwlO (1:10 000), anti-FtsX (1:10 000), anti-ClpX (1:5000) (Haeusser et al., 2009) and anti-Spo0J (1:5000) (Lin and Grossman, 1998) diluted into 3% BSA in 1× PBS-0.05% Tween-20. Primary antibodies were detected using horseradish peroxidase-conjugated goat anti-rabbit IgG (Bio-Rad) and the Super Signal chemiluminscence reagent as described by the manufacturer (Pierce).

Protein purification and antibody production

Recombinant proteins were expressed in E. coli strain BL21 (DE3). Strains were grown in LB medium supplemented with 100 μg ml−1 ampicillin at 37°C and protein expression was induced by the addition of IPTG to a final concentration of 0.5 mM. After 3 h of induction, cultures were subjected to centrifugation at 10 000 g for 10 min. Cell pellets were resuspended in 100 mM Tris pH 7.5, 500 mM NaCl, 5 mM imidazole, 2 mM β-mercaptoethanol and Complete EDTA-free protease inhibitor (Roche). Cell suspensions were passed through a French press. Cell lysates were clarified by centrifugation at 10 000 g for 10 min at 4°C. Clarified lysates were injected onto 1 ml HisTrap FF columns (GE Healthcare) using an AKTA explorer 10 (GE Healthcare). The columns were washed with 10 ml Buffer A (100 mM Tris pH 7.5, 500 mM NaCl, 5 mM imidazole, and 2 mM β-mercaptoethanol). His6 or His6-SUMO fusion proteins were eluted with a 20 ml linear gradient (from 0% to 100%) of Buffer B (100 mM Tris pH 7.5, 500 mM NaCl, 500 mM imidazole, and 2 mM β-mercaptoethanol). Elution fractions were pooled (about 5 ml) and dialysed twice in 1 l 50 mM Tris pH 8.0, 150 mM NaCl, 2 mM β-mercaptoethanol, 10% glycerol at 4°C. Dialysed fractions containing His6-SUMO fusions proteins were incubated with His6-Ulp1 protease overnight on ice. Reactions were injected onto HisTrap FF columns and flow through fractions containing untagged proteins were collected and used to generate rabbit polyclonal antibodies (Covance).

Fluorescence microscopy

Fluorescence microscopy was performed using a Nikon Ti microscope equipped with a plan apochromat 100× 1.4 NA phase contrast objective and a CoolSnapHQ digital camera (Photometrics). Images were acquired using Nikon Elements software. Membranes were stained with TMA-DPH (Molecular Probes). Image analysis and quantification were performed using MicrobeTracker (Sliusarenko et al., 2011). Images were adjusted and cropped using Metamorph software. Final figure preparation was performed in Adobe Illustrator.

For snapshot imaging, cells were immobilized on 2% agarose pads containing growth medium. For time-lapse imaging, cells were imaged on a glass bottom dish (WillCo). Exponentially growing cells were concentrated by centrifugation at 5000 r.p.m. for 2 min. 2 μl of the cell pellet was spotted onto the dish and a 2% agarose pad containing growth medium was then laid on top of the bacteria. Cells were imaged in a stage top incubator (Bioscience Tools) with controlled humidity and temperature. The upper face of the pad was fully exposed, allowing adequate oxygen for growth. The objective was maintained at the same temperature as the incubator using an objective heater (Biotechs). Images were acquired every 5 or 10 s as specified, using neutral density filters (ND4) to reduce photobleaching and phototoxicity.

Acknowledgements

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information

We thank members of the Rudner and Bernhardt labs, especially Tsuyoshi Uehara, for advice and encouragement, Eammon Riley for plasmid construction and two-hybrid analysis, Nick Peters and Chris Rodrigues for help with fluorescence imaging, and Alex Meeske for help with double mutant analysis. We thank Jeff Errington and co-workers for communicating results prior to publication. Support for this work comes from the National Institute of Health Grant GM086466 (D. Z .R.) and AI083365-01 (T. G. B.).

References

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information

Supporting Information

  1. Top of page
  2. Summary
  3. Introduction
  4. Results
  5. Discussion
  6. Experimental procedures
  7. Acknowledgements
  8. References
  9. Supporting Information
FilenameFormatSizeDescription
mmi12330-sup-0001-si.avi224K

 

mmi12330-sup-0002-si.avi95K

 

mmi12330-sup-0003-si.avi102K

 

mmi12330-sup-0004-si.avi78K

 

mmi12330-sup-0005-si.pdf4941K

 

Please note: Wiley Blackwell is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.