E-mail a Wiley Online Library Link

Lena E. Josch, Volker Götz, Christian Römer, Natalia Konchakova, Stefan Emrich, Christine Wagner, Ralf Müller, Michael Kopnarski and Alois K. Schlarb Influence of the Shaping on Tribological Properties of PEEK-Coated U-Shaped Metal-Profiles Advanced Engineering Materials 15

Version of Record online: 12 APR 2013 | DOI: 10.1002/adem.201200274

Thumbnail image of graphical abstract

Composite bearings are normally produced with sintered bronze between the polymer coating and the metallic substrate, omitting the bronze layer would reduce complexity. Thermal impact welded metal-polymer composite specimen without bronze are shaped to U-half shells to test them tribologically. Wear rates and friction coefficient are measured. The effects of the shaping are examined by surface analysis. Beside those shaping effects the heat balance is a very important influencing parameter.

Complete the form below and we will send an e-mail message containing a link to the selected article on your behalf

Required = Required Field