E-mail

E-mail a Wiley Online Library Link

Andreas Sandström, Amir Asadpoordarvish, Jenny Enevold and Ludvig Edman Spraying Light: Ambient-Air Fabrication of Large-Area Emissive Devices on Complex-Shaped Surfaces Advanced Materials 26

Article first published online: 15 MAY 2014 | DOI: 10.1002/adma.201401286

Thumbnail image of graphical abstract

Light-emitting electrochemical cells, featuring uniform and efficient light emission over areas of 200 cm2, are fabricated under ambient air with a for-the-purpose developed “spray-sintering” process. This fault-tolerant fabrication technique can also produce multicolored emission patterns via sequential deposition of different inks based on identical solvents. Significantly, additive spray-sintering using a mobile airbrush allows a straightforward addition of emissive function onto a wide variety of complex-shaped surfaces, as exemplified by the realization of a light-emitting kitchenware fork.

Complete the form below and we will send an e-mail message containing a link to the selected article on your behalf

Required = Required Field

SEARCH