E-mail a Wiley Online Library Link

Dr. Jiazhao Wang, Lin Lu, Dr. Dongqi Shi, Richard Tandiono, Prof. Zhaoxiang Wang, Dr. Konstantin Konstantinov and Prof. Huakun Liu A Conductive Polypyrrole-Coated, Sulfur–Carbon Nanotube Composite for Use in Lithium–Sulfur Batteries ChemPlusChem 78

Version of Record online: 27 FEB 2013 | DOI: 10.1002/cplu.201200293

Thumbnail image of graphical abstract

Battery powered: The title composite (see figure) was prepared and investigated as a cathode material for Li–S batteries. The conducting polypyrrole coating serves to confine polysulfides and prevent them from dissolving into the electrolyte. The capacity of S-CNT-PPy is about 600 mAh g−1 after 40 cycles, which is much higher than for the S-CNT composite (430 mAh g−1)

Complete the form below and we will send an e-mail message containing a link to the selected article on your behalf

Required = Required Field