Journal of Applied Polymer Science

Cover image for Vol. 131 Issue 24

Online ISSN: 1097-4628

Cover Gallery


Cover Gallery Volumes 126-128

Cover Gallery Volumes 129-130


Cover Pic
Volume 131, Issue 1
Inside Cover Pic
Volume 131, Issue 1
Back Cover Pic
Volume 131, Issue 1
Cover Pic
Volume 131, Issue 2
Graphene and graphene oxide and their uses in barrier polymers Structure and dielectric breakdown strength of nano calcium carbonate/polypropylene composites Gas permeability of thin dense films from polymer blend of thermoplastic elastomer and polyolefin Modification of vital wheat gluten with phosphoric acid to produce high free swelling capacity
Inside Cover Pic
Volume 131, Issue 2
Back Cover Pic
Volume 131, Issue 2
Cover Pic
Volume 131, Issue 3
Inside Cover Pic
Volume 131, Issue 3
Anionic bulk polymerization to synthesize styrene–isoprene diblock and multiblock copolymers by reactive extrusion Layer-by-layer assembled hydrogel nanocomposite film with a high loading capacity The investigation of a new moderate water shutoff agent: Cationic polymer and anionic polymer Investigation of the effects of adhesion promoters on the adhesion properties of rubber/steel cord by a new testing technique
Back Cover Pic
Volume 131, Issue 3
Cover Pic
Volume 131, Issue 4
Inside Cover Pic
Volume 131, Issue 4
Back Cover Pic
Volume 131, Issue 4
Influence of molecular orientation direction on the in-plane thermal conductivity of polymer/hexagonal boron nitride composites Microstructural characteristics and crystallization behaviors of poly(l-lactide) scaffolds by thermally induced phase separation Determination of highly porous plastic foam structural characteristics by processing light microscopy images data Antiscaling properties of novel maleic-anhydride copolymers prepared via iron (II) – chloride mediated ATRP
Cover Pic
Volume 131, Issue 5, Special Issue: Polycarbonates and Green Chemistry
Inside Cover Pic
Volume 131, Issue 5, Special Issue: Polycarbonates and Green Chemistry
Cover Pic
Volume 131, Issue 6
Inside Cover Pic
Volume 131, Issue 6
Renaissance of aliphatic polycarbonates: New techniques and biomedical applications Effect of interfacial tension on the cell structure of poly(methyl methacrylate)/bisphenol A polycarbonate blends foamed with CO2 Crystallization of isotactic polypropylene inside dense networks of carbon nanofillers Innovative films with tunable permeability for fresh vegetable packaging applications
Back Cover Pic
Volume 131, Issue 6
Cover Pic
Volume 131, Issue 7
Back Cover Pic
Volume 131, Issue 7
Cover Pic
Volume 131, Issue 8
Main-chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite Development of polylactide open-cell foams with bimodal structure for high-acoustic absorption Removal of cobalt ions from aqueous solutions by using poly(N,N-dimethylaminopropyl methacrylamide/itaconic acid) hydrogels Thermal conductivity augmentation of composite polymer materials with artificially controlled filler shapes
Back Cover Pic
Volume 131, Issue 8
Cover Pic
Volume 131, Issue 9
Back Cover Pic
Volume 131, Issue 9
Cover Pic
Volume 131, Issue 10
Synthesis and application of polyacrylate nanocapsules loaded with lilial Energy filtered low voltage "in lens detector" SEM and XPS of natural fiber surfaces PET as a support material for TiO2 in advanced oxidation processes Crystallization and mechanical properties of isotactic polypropylene/calcium carbonate nanocomposites with a stratified distribution of calcium carbonate
Back Cover Pic
Volume 131, Issue 10
Cover Pic
Volume 131, Issue 11
Back Cover Pic
Volume 131, Issue 11
Cover Pic
Volume 131, Issue 12
Lamination of polyethylene composite films by ultrasonic welding: Investigation of peel behavior and identification of optimum welding parameters Halogen Free flame retardant rigid polyurethane foam with a novel phosphorus−nitrogen intumescent flame retardant Nylon-coated ultra high molecular weight polyethylene fabric for enhanced penetration resistance Processing and thermal properties of composites based on recycled PET, sisal fibers, and renewable plasticizers
Back Cover Pic
Volume 131, Issue 12
Cover Pic
Volume 131, Issue 13
Back Cover Pic
Volume 131, Issue 13
Cover Pic
Volume 131, Issue 14
Recent advances in bio-sourced polymeric carbohydrate/nanotube composites Pullulan-based films and coatings for food packaging: Present applications, emerging opportunities, and future challenges Aromatic liquid crystalline copolyesters with low Tm and high Tg: Synthesis, characterization, and properties Block copolymers for protein ordering
Back Cover Pic
Volume 131, Issue 14
Cover Pic
Volume 131, Issue 15
Back Cover Pic
Volume 131, Issue 15
Back Cover Pic
Volume 131, Issue 16
Microtextured polystyrene surfaces for three-dimensional cell culture made by a simple solvent treatment method Microbial mediated dimerization of fattyacids of sunflower oil: An effective role of lipase and biosurfactant Polymer-coated nanoparticles for enhanced oil recovery Zein-based micro- and nano-particles for drug and nutrient delivery: A review
Back Cover Pic
Volume 131, Issue 16
Cover Pic
Volume 131, Issue 17
Back Cover Pic
Volume 131, Issue 17
Cover Pic
Volume 131, Issue 18
A review of fracturing fluid systems used for hydraulic fracturing of oil and gas wells Recent synthetic approaches and emerging bio-inspired strategies for the development of sustainable pressure-sensitive adhesives derived from renewable building blocks Friction and wear properties of dumbbell-shaped jute fiber-reinforced friction materials Synthesis and characterization of inherently flame-retardant and anti-dripping thermoplastic poly(imides-urethane)s
Inside Cover Pic
Volume 131, Issue 18
Back Cover Pic
Volume 131, Issue 18
 Cover Pic
Volume 131, Issue 19
Back Cover Pic
Volume 131, Issue 19
Morphology controlled synthesis of polyaniline nanostructures using swollen liquid crystal templates Robust polymeric hydrogel using rod-like amidodiol as crosslinker: Studies on adsorption kinetics and mechanism using dyes as adsorbate Phase separation to create hydrophilic yet non-water soluble PLA/PLA-b-PEG fibers via electrospinning A slow shape-recovery polymer based on polylactic acid
 Cover Pic
Volume 131, Issue 20
Back Cover Pic
Volume 131, Issue 20
 Cover Pic
Volume 131, Issue 21
Back Cover Pic
Volume 131, Issue 21
Synthesis and characterization of an associative polymer with an octylphenyl polyoxyethylene side chain as a potential enhanced-oil-recovery chemical Surface-modified pliable PDLLA/PCL/β-TCP scaffolds as a promising delivery system for bone regeneration Preparation of multi-level honeycomb-structured porous films by control of spraying atomized water droplets Silk fibroin-chondroitin sulfate-alginate porous scaffolds: Structural properties and in vitro studies
 Cover Pic
Volume 131, Issue 22
Back Cover Pic
Volume 131, Issue 22
 Cover Pic
Volume 131, Issue 23
Back Cover Pic
Volume 131, Issue 23
Electrospinning of highly aligned and covalently cross-linked hydrogel microfibers pH-sensitive crosslinked guar gum-based superabsorbent hydrogels: Swelling response in simulated environments and water retention behavior in plant growth media Fabrication of the self-reinforced composites using co-extrusion technique Preparation and characterization of high-selectivity hollow fiber composite nanofiltration membrane by two-way coating technique
 Cover Pic
Volume 131, Issue 24
Back Cover Pic
Volume 131, Issue 24
Development of polynorbornene as a structural material for microfluidics and flexible BioMEMS Negative differential conductance materials for flexible electronics

SEARCH

SEARCH BY CITATION