Angewandte Chemie International Edition

Cover image for Vol. 56 Issue 23

Editor: Peter Gölitz, Deputy Editors: Neville Compton, Haymo Ross

Online ISSN: 1521-3773

Associated Title(s): Angewandte Chemie, Chemistry - A European Journal, Chemistry – An Asian Journal, ChemistryOpen, ChemPhotoChem, ChemPlusChem, Zeitschrift für Chemie

[More press releases]

Press Release

Angewandte Chemie International Edition ,
doi: 10.1002/anie.201209676

Nr. 08/2013
February 26, 2013

Airy but Thirsty

Ultralight, flexible, fire-resistant carbon nanotube aerogels from bacterial cellulose

Contact: Shu-Hong Yu, University of Science and Technology of China, Hefei (P.R. China)
Registered journalists may download the original article here:
Ultralight, Flexible, and Fire-Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose

They can absorb vast amounts of oil or organic compounds, yet they are nearly as light as air: highly porous solids made of a three-dimensional network of carbon nanotubes. In the journal Angewandte Chemie, Chinese scientists have now introduced a simple technique for the production of these ultralight, flexible, fire-resistant aerogels. Their method begins with bacterial cellulose as an inexpensive starting material. Their fibrous lightweights can "suck" organic contaminants from polluted water and could possibly be used as pressure sensors.

Airy but Thirsty - Ultralight, flexible, fire-resistant carbon nanotube aerogels from bacterial cellulose
© Wiley-VCH

Their unique properties—low density, highy porosity, high specific surface, and high electrical conductivity—make carbon aerogels promising new materials. They could be used as catalyst supports, electrodes for supercapacitors, adsorbents, and gas sensors, as well as for synthetic muscles. However, there is still no simple, industrially and environmentally friendly method for the production of these attractive lightweights. A team led by Shu-Hong Yu at the Hefei National Laboratory for Physical Sciences at Micrscale (HFNL), Univeristy of Science and Technology of China is pursuing their production from biomass. They selected bacterial cellulose, a commonly used, inexepensive, nontoxic form of biomass consisting of a tangled network of cellulose nanofibers. This material can easily be produced on an industrial scale through microbial fermentation.

The researchers trimmed off small pieces of the tangled cellulose nanofibers. These were freeze-dried and then pyrolyzed at 1300 °C under argon. This converts the cellulose into graphitic carbon. The density decreases but the network structure remains intact. The result is a black, ultralight, mechanically stable aerogel. Because it is porous and highly hydrophobic, it can adsorb organic solvents and oils—up to 106 to 312 times its own weight. It draws oil out of an oil/water mixture with high efficiency and selectivity, leaving behind pure water. This makes the new aerogel an ideal candidate for cleaning up oil spills or sucking up nonpolar industrial pollutants. The absorbed substances can easily be removed from the gel through distillation or combustion, allowing the gel to be used again.

The extraordinary heat- and fire-resistence of this material are particularaly noteworthy: repeated treatment with the flame of a torch caused no changes in its form or inner three-dimensional pore structure.

The high electrical conductivity of the aerogel also suggests the possibility of electronic applications. The material has high mechanical flexibility. It can be compressed to about 10 % of its original volume and will subsequently expand back to nearly its original shape. Its conductivity decreases in a nearly linear fashion with increasing compression, which could allow the aerogel to be used as a pressure sensor.

(2937 characters)

About the Author

Professor Shu-Hong Yu is a Full professor at the Hefei National Laboratory for Physical Sciences at Micrscale (HFNL), University of Science and Technology (USTC), China. He is the Head of the Division of Nanomaterials & Chemistry, and also acting as the Deputy Dean of the School of Chemistry & Materials. He is the recipient of the Roy-Somiya Medal of the International Solvothermal and Hydrothermal Association (ISHA) (2010), Chem Soc Rev Emerging Investigator Award (2010) by the Royal Society of Chemistry (UK). His main specialty includes controlled synthesis of new functional nanoparticles, and macroscopic-scale assembly of nanoscale building blocks, and their applications in energy storage, energy conversion, environment protection and other sustainable application systems.

SEARCH

SEARCH BY CITATION