Process Safety Progress

Copyright © 2013 American Institute of Chemical Engineers

Cover image for Vol. 32 Issue 2

Early View (Online Version of Record published before inclusion in an issue)

Edited By: Professor Ronald J. Willey and Professor Joseph Louvar

Impact Factor: 0.526

ISI Journal Citation Reports © Ranking: 2011: 102/133 (Engineering Chemical)

Online ISSN: 1547-5913

Associated Title(s): AIChE Journal, Biotechnology Progress, Environmental Progress & Sustainable Energy

  1. Research Articles

    1. Bow-tie diagrams in downstream hazard identification and risk assessment

      Yaneira E. Saud, Kumar (Chris) Israni and Jeremy Goddard

      Article first published online: 4 MAY 2013 | DOI: 10.1002/prs.11576

  2. Original Articles

    1. Using critical flame temperature for estimating lower flammable limits of a mixture

      Tingguang Ma

      Article first published online: 4 MAY 2013 | DOI: 10.1002/prs.11603

    2. Quantitative safety analysis of a laboratory-scale bioreactor for hydrogen sulfide biotreatment using fault tree analysis

      Mohamed A. Zytoon, Ahmed H. El-Shazly, Madbuli H. Noweir and Abdulrahim A. Al-Zahrani

      Article first published online: 28 APR 2013 | DOI: 10.1002/prs.11600

  3. Research Articles

    1. From SEMP to SEMS to SEMS II (pages 1–2)

      Ian Sutton

      Article first published online: 28 APR 2013 | DOI: 10.1002/prs.11602

    2. Tutorial on combustible dust (pages 1–9)

      Timothy J. Myers and Alfonso F. Ibarreta

      Article first published online: 28 APR 2013 | DOI: 10.1002/prs.11596

    3. The ALARP principle in process safety

      Paul Baybutt

      Article first published online: 23 APR 2013 | DOI: 10.1002/prs.11599

    4. Investigation of an explosion in a gasoline purification plant

      Trygve Skjold and Kees van Wingerden

      Article first published online: 23 APR 2013 | DOI: 10.1002/prs.11584

    5. Normalization of process safety lagging metrics

      Mengtian Wang, Ray A. Mentzer, Xiaodan Gao, Joshua Richardson and M. Sam Mannan

      Article first published online: 3 APR 2013 | DOI: 10.1002/prs.11574

    6. Is our apparatus foolproof?: Examination of safety-important characteristics of an electrostatic discharge tester for explosives

      Milos Ferjencik, Vojtech Pelikan and Simon Cousy

      Article first published online: 15 MAR 2013 | DOI: 10.1002/prs.11573

    7. Pilot testing of fire sprinkler system in extremely corrosive industrial duct environments

      Paul Su, William W. Doerr, J.C. Harrington, David B. Fuller and Jon M. Barna

      Article first published online: 6 MAR 2013 | DOI: 10.1002/prs.11575

    8. Paradigm Shift in the Regulatory Application of Safety Management Systems to Offshore Facilities

      Steven T. Maher, George D. Long, Ramine S. Cromartie, Ian S. Sutton and Mark R. Steinhilber

      Article first published online: 8 FEB 2013 | DOI: 10.1002/prs.11558

    9. Risk Tolerance Criteria and the IEC 61511/ISA 84 Standard on Safety Instrumented Systems

      Paul Baybutt

      Article first published online: 8 FEB 2013 | DOI: 10.1002/prs.11554

    1. Safety improvements in a Methanation reactor

      Mike Walton, Tony Southerton and Paul Sharp

      Article first published online: 6 MAY 2009 | DOI: 10.1002/prs.10325

SEARCH

SEARCH BY CITATION