Process Safety Progress

Cover image for Vol. 33 Issue 2

Edited By: Professor Ronald J. Willey and Associate Editor John Murphy

Impact Factor: 0.717

ISI Journal Citation Reports © Ranking: 2012: 88/133 (Engineering Chemical)

Online ISSN: 1547-5913

Associated Title(s): AIChE Journal, Biotechnology Progress, Environmental Progress & Sustainable Energy

Most Accessed


Most Accessed in 5/2014

Baybutt, Paul
The ALARP principle in process safety [Feature Article]
Process Saf. Prog. 2013, vol. 33, p. 36

Holmstrom, Don; Altamirano, Francisco; Banks, Johnnie; Joseph, Giby; Kaszniak, Mark; Mackenzie, Cheryl; Shroff, Reepa; Cohen, Hillary; Wallace, Stephen
CSB investigation of the explosions and fire at the BP texas city refinery on March 23, 2005 [Article]
Process Saf. Prog. 2006, vol. 25, p. 345

Saud, Yaneira E.; Israni, Kumar (Chris); Goddard, Jeremy
Bow-tie diagrams in downstream hazard identification and risk assessment [Feature Article]
Process Saf. Prog. 2013, vol. 33, p. 26

Stack, Bob; Sepeda, Adrian; Moosemiller, Mike
Guidelines for determining the probability of ignition of a released flammable mass [Feature Article]
Process Saf. Prog. 2014, vol. 33, p. 19

Aziz, H. Abdul; Shariff, A. Mohd; Rusli, R.
Managing process safety information based on process safety management requirements [Feature Article]
Process Saf. Prog. 2014, vol. 33, p. 41

Gorman, Dave; Farr, Jim; Bellair, Rob; Freeman, Wade; Frurip, Dave; Hielscher, Al; Johnstone, Harold; Linke, Myriam; Murphy, Pat; Sheng, Min; Gelder, Klaas; Viveros, Dalina
Enhanced NOAA chemical reactivity worksheet for determining chemical compatibility [Feature Article]
Process Saf. Prog. 2014, vol. 33, p. 4

Transitions within the process safety community [Editorial]
Process Saf. Prog. 2014, vol. 33, p. 1

Dormohammadi, Ali; Zarei, Esmaeil; Delkhosh, Mohammad Bagher; Gholami, Ali
Risk analysis by means of a QRA approach on a LPG cylinder filling installation [Feature Article]
Process Saf. Prog. 2013, vol. 33, p. 77

Alderman, John A.
Introduction to LNG safety [LNG-Liquefied Natural Gas]
Process Saf. Prog. 2005, vol. 24, p. 144

Murphy, John F.; Conner, James
Black swans, white swans, and 50 shades of grey: Remembering the lessons learned from catastrophic process safety incidents [Feature Article]
Process Saf. Prog. 2014, vol. 33, p. 110

Ma, Tingguang; Larranaga, Michael
Flammable state and dilution requirement in the theoretical flammability diagram [Feature Article]
Process Saf. Prog. 2013, vol. 33, p. 70

Duh, Yih-Shing; Hui wu, Xiao; Kao, Chen-Shan
Hazard ratings for organic peroxides [Feature Article: Organic Peroxides]
Process Saf. Prog. 2008, vol. 27, p. 89

Xiangdi, Zhao; Chunming, Jiang; Yanping, Wang; Jiwu, Yuan; Zheng, Wang
Simulation study on an explosion accident in china [Feature Article]
Process Saf. Prog. 2014, vol. 33, p. 56

Baybutt, Paul
The use of risk matrices and risk graphs for SIL determination [Feature Article]
Process Saf. Prog. 2013, vol. 33, p. 179

McCavit, Jack; Berger, Scott; Nara, Louisa
Characteristics of companies with great process safety performance [Feature Article]
Process Saf. Prog. 2013, vol. 33, p. 131


10 most accessed articles from Process Safety Progress in 2012

Hendershot, Dennis C.
Process safety management—You can't get it right without a good safety culture [Process Safety and Risk Management]
Process Saf. Prog. 2011, vol. 31, p. 2

Vorderbrueggen, John B.
Imperial sugar refinery combustible dust explosion investigation [Featured Topics: The Hazards of Handling Combustible Dusts]
Process Saf. Prog. , vol. 30, p. 66

Moseman, James
New risk acceptance criteria for process safety [Process Safety and Risk Management]
Process Saf. Prog. 2011, vol. 31, p. 6

Zheng, Bin; Chen, Guo-hua
Storage tank fire accidents [Research and Case Histories]
Process Saf. Prog. 2011, vol. 30, p. 291

Taveau, Jérôme
The Buncefield explosion: Were the resulting overpressures really unforeseeable? [Understanding the Nature of Dust Explosions]
Process Saf. Prog. 2011, vol. 31, p. 55

Taveau, Jérôme
Secondary dust explosions: How to prevent them or mitigate their effects? [Applications of Process Safety in area of Dust Control]
Process Saf. Prog. 2011, vol. 31, p. 36

Duisters, Harrie
Examples of safety studies and SIL analysis on the ammonia plants of OCI Nitrogen [Process Safety and Case Histories]
Process Saf. Prog. 2011, vol. 31, p. 83

Shirali, G.H.A.; Mohammadfam, I.; Motamedzade, M.; Ebrahimipour,, V.; Moghimbeigi, A.
Assessing resilience engineering based on safety culture and managerial factors [Process Safety and Risk Management]
Process Saf. Prog. 2011, vol. 31, p. 17

Ogle, Russell A.; Ramirez, Juan C.; Smyth, Suzanne A.
Calculating the explosion energy of a boiling liquid expanding vapor explosion using exergy analysis [Understanding the Nature of Dust Explosions]
Process Saf. Prog. 2011, vol. 31, p. 51

Willey, Ronald J.; Fogler, H. Scott; Cutlip, Michael B.
The integration of process safety into a chemical reaction engineering course: Kinetic modeling of the T2 incident [Case Histories]
Process Saf. Prog. 2010, vol. 30, p. 39

SEARCH

SEARCH BY CITATION