Polymer Engineering & Science

Cover image for Vol. 57 Issue 8

Early View (Online Version of Record published before inclusion in an issue)

Edited By: Alan J. Lesser

Impact Factor: 1.449

ISI Journal Citation Reports © Ranking: 2016: 47/86 (Polymer Science); 73/135 (Engineering Chemical)

Online ISSN: 1548-2634

  1. Articles

    1. Preparation of toughened polypropylene-g-poly (butyl acrylate-Co-acrylated castor oil) by suspension grafting polymerization

      Dan Zhao, Li Wang, Rong Zhang, Yuhong Ma, Dong Chen, Changwen Zhao and Wantai Yang

      Version of Record online: 23 FEB 2017 | DOI: 10.1002/pen.24534

    2. Evaluation of fundamental viscoelastic functions by a nonlinear viscoelastic model

      Gerasimos Spathis, Stylianos Katsourinis and Evagelia Kontou

      Version of Record online: 22 FEB 2017 | DOI: 10.1002/pen.24525

    3. Toughening polylactide with a catalyzed epoxy-acid interfacial reaction

      Christopher Thurber, Liangliang Gu, Jason C. Myers, Timothy P. Lodge and Christopher W. Macosko

      Version of Record online: 22 FEB 2017 | DOI: 10.1002/pen.24527

    4. Thermal properties of glass fiber reinforced polyamide 6 composites throughout the direct long-fiber reinforced thermoplastic process

      Thomas Whitfield, Takashi Kuboki, Jeffrey Wood, Vanja Ugresic, Shyam Sathyanarayana and Koffi Dagnon

      Version of Record online: 20 FEB 2017 | DOI: 10.1002/pen.24529

    5. Enhanced microwave absorption properties of electrospun PEK-C nanofibers loaded with Fe3O4/CNTs hybrid nanoparticles

      Qi Yu, Mingbo Ma, Ping Chen, Qi Wang, Chun Lu, Yu Gao, Rongchao Wang and Hanlin Chen

      Version of Record online: 7 FEB 2017 | DOI: 10.1002/pen.24496

    6. Cross-linked hydroxyl-conductive copolymer/silica composite membranes based on addition-type polynorbornene for alkaline anion exchange membrane fuel cell applications

      Xiaohui He, Xiong Jiang, Zijie Wang, Yingjiao Deng, Zhilong Han, Yingping Yang and Defu Chen

      Version of Record online: 7 FEB 2017 | DOI: 10.1002/pen.24524

    7. Effect of block composition on the morphology and transport properties of sulfonated fluoroblock copolymer blend membranes

      Edward M.A. Guerrero-Gutiérrez, Maritza Pérez-Pérez, Gregory M. Newbloom, Lilo D. Pozzo and David Suleiman

      Version of Record online: 7 FEB 2017 | DOI: 10.1002/pen.24508

    8. Upcycling of polypropylene—the influence of polyethylene impurities

      F. Kamleitner, B. Duscher, T. Koch, S. Knaus and V. M. Archodoulaki

      Version of Record online: 4 FEB 2017 | DOI: 10.1002/pen.24522

    9. Effect of chemical modification on the thermal and rheological properties of polylactide

      Svenja Göttermann, Tobias Standau, Sandra Weinmann, Volker Altstädt and Christian Bonten

      Version of Record online: 4 FEB 2017 | DOI: 10.1002/pen.24505

    10. Understanding surface discharge activity with epoxy silicon carbide nanocomposites

      Ramanujam Sarathi, Animesh Sahoo, Yu Chen, Yonghong Cheng and Toshikatsu Tanaka

      Version of Record online: 4 FEB 2017 | DOI: 10.1002/pen.24518

    11. High-performance flexible epoxy/ZnO nanocomposites with enhanced mechanical and thermal properties

      Nehal A. Salahuddin, Maged El-Kemary and Ebtisam M. Ibrahim

      Version of Record online: 4 FEB 2017 | DOI: 10.1002/pen.24520

    12. Polyimides cross-linked with amino group-containing compounds

      P. Sysel, D. Maly, J. Vysohlid, K. Friess, K. Pilnacek, M. Lanc and O. Vopicka

      Version of Record online: 4 FEB 2017 | DOI: 10.1002/pen.24521

    13. Depolymerization of poly(ethylene naphthalate) in fused silica capillary reactor and autoclave reactor from 240 to 280°C in subcritical water

      Ke Bei, Peixia Ma, Junliang Wang, Kai Li, Jinghui Lyu, Zhichao Hu, I-Ming Chou and Zhiyan Pan

      Version of Record online: 3 FEB 2017 | DOI: 10.1002/pen.24523

    14. Flexible and stretchable electrode based on multiwalled carbon nanotube/deproteinized natural rubber composites

      Paweenuch Tangkitthanachoke, Karat Petcharoen, Nophawan Paradee, Watchara Sangwan and Anuvat Sirivat

      Version of Record online: 3 FEB 2017 | DOI: 10.1002/pen.24519

    15. Influence of carbon black and carbon nanotubes on the conductivity, morphology, and rheology of conductive ternary polymer blends

      Paul J. Brigandi, Jeffrey M. Cogen, John R. Reffner, Casey A. Wolf and Raymond A. Pearson

      Version of Record online: 3 FEB 2017 | DOI: 10.1002/pen.24516

    16. Preparation of a new filament based on polyamide-6 for three-dimensional printing

      Yunchao Jia, Hui He, Xiaodong Peng, Shuna Meng, Jian Chen and Yi Geng

      Version of Record online: 3 FEB 2017 | DOI: 10.1002/pen.24515

    17. Optimization of the electrospinning processing-window to fabricate nanostructured PE-b-PEO and hybrid PE-b-PEO/EBBA fibers

      Sheyla Carrasco-Hernandez, Junkal Gutierrez, Laura Peponi and Agnieszka Tercjak

      Version of Record online: 2 FEB 2017 | DOI: 10.1002/pen.24492

    18. Absorbent polyvinyl alcohol–sodium carboxymethyl cellulose hydrogels for propolis delivery in wound healing applications

      Renata Nunes Oliveira, Ana Paula Duarte Moreira, Rossana Mara da Silva Moreira Thiré, Brid Quilty, Thayse Marques Passos, Pascal Simon, Mauricio Cordeiro Mancini and Garrett Brian McGuinness

      Version of Record online: 2 FEB 2017 | DOI: 10.1002/pen.24500

SEARCH

SEARCH BY CITATION