Polymer Engineering & Science

Cover image for Vol. 54 Issue 9

Early View (Online Version of Record published before inclusion in an issue)

Edited By: Alan J. Lesser

Impact Factor: 1.441

ISI Journal Citation Reports © Ranking: 2013: 46/82 (Polymer Science); 62/133 (Engineering Chemical)

Online ISSN: 1548-2634

  1. Articles

    1. Preparation and characterization of pH-sensitive microparticles based on polyelectrolyte complexes for antibiotic delivery

      L. Agüero, D. Zaldivar, L. Peña, Y. Solís, J.A. Ramón and Marcos L. Dias

      Article first published online: 13 JUL 2014 | DOI: 10.1002/pen.23962

    2. Infrared melt temperature measurement of single screw extrusion

      J. Vera-Sorroche, A.L. Kelly, E.C. Brown and P.D. Coates

      Article first published online: 12 JUL 2014 | DOI: 10.1002/pen.23976

    3. Equibiaxial elongational viscosity measurements of commercial polymer melts

      Rebecca M. Mick, Tai-Yi Shiu and David C. Venerus

      Article first published online: 12 JUL 2014 | DOI: 10.1002/pen.23969

  2. Research Articles

  3. Articles

    1. Polyethylene/sepiolite fibers. Influence of drawing and nanofiller content on the crystal morphology and mechanical properties

      Yanela Alonso, Raquel E. Martini, Antonio Iannoni, Andrea Terenzi, José M. Kenny and Silvia E. Barbosa

      Article first published online: 5 JUL 2014 | DOI: 10.1002/pen.23980

    2. Mixing effect on emulsion polymerization in a batch reactor

      Shideh Fathi Roudsari, Ramdhane Dhib and Farhad Ein-Mozaffari

      Article first published online: 4 JUL 2014 | DOI: 10.1002/pen.23963

    3. Multiobjective optimization of long-chain branched propylene polymerization

      Anitha Mogilicharla, Saptarshi Majumdar and Kishalay Mitra

      Article first published online: 4 JUL 2014 | DOI: 10.1002/pen.23977

    4. The effect of microstructure on the slow crack growth resistance in polyethylene resins

      Ali Adib, Carlos Domínguez, Jesús Rodríguez, Carlos Martín and Rafael A. García

      Article first published online: 2 JUL 2014 | DOI: 10.1002/pen.23970

    5. New method for determining the optical rotatory dispersion of hydroxypropyl cellulose polymer solutions in water

      Andreea Irina Barzic, Dan Gheorghe Dimitriu and Dana Ortansa Dorohoi

      Article first published online: 30 JUN 2014 | DOI: 10.1002/pen.23978

    6. Preparation of magnetic porous terpolymer and its application in cellulase immobilization

      Huimin Qi, Hongdong Duan, Xingjian Wang, Xia Meng, Xiaocong Yin and Lina Ma

      Article first published online: 30 JUN 2014 | DOI: 10.1002/pen.23973

    7. Acidic buffer mechanism of cyclotriphosphazene and melamine cyanurate synergism system flame retardant epoxy resin

      Yanbo Cheng, Jiang Li, Yueshan He, Biwu Wang, Yuan Liu and Qi Wang

      Article first published online: 30 JUN 2014 | DOI: 10.1002/pen.23974

    8. Thermal properties of epoxy resins crosslinked by an aminated lignin

      Hong Pan, Gang Sun, Tao Zhao and Gehui Wang

      Article first published online: 30 JUN 2014 | DOI: 10.1002/pen.23960

    9. Facile preparation of PLGA microspheres with diverse internal structures by modified double-emulsion method for controlled release

      Fengxuan Han, Fang Zhou, Xiaoling Yang, Jin Zhao, Yunhui Zhao and Xiaoyan Yuan

      Article first published online: 27 JUN 2014 | DOI: 10.1002/pen.23957

SEARCH

SEARCH BY CITATION