Polymer Engineering & Science

Cover image for Vol. 57 Issue 1

Early View (Online Version of Record published before inclusion in an issue)

Edited By: Alan J. Lesser

Impact Factor: 1.719

ISI Journal Citation Reports © Ranking: 2015: 40/85 (Polymer Science); 61/135 (Engineering Chemical)

Online ISSN: 1548-2634

  1. Articles

    1. Magnetic (ethylene–octene) elastomer composites obtained by extrusion

      Marcin Masłowski, Anna Strąkowska and Krzysztof Strzelec

      Version of Record online: 15 SEP 2016 | DOI: 10.1002/pen.24446

    2. Crystallization and Component Properties of Polyamide 12 at Processing-Relevant Cooling Conditions

      Christopher Fischer, Andreas Seefried and Dietmar Drummer

      Version of Record online: 15 SEP 2016 | DOI: 10.1002/pen.24441

    3. Influence of aqueous dispersions in place of organic solvents during the synthesis of shape memory polyurethanes on their structure and properties

      Giuliano S. Martins, Iaci M. Pereira, Nicolas M.L. Hoehne and Rodrigo L. Oréfice

      Version of Record online: 13 SEP 2016 | DOI: 10.1002/pen.24438

    4. Characterizing the flow of slurries using percolation theory based functions

      Mark D. Wetzel and Gregory A. Campbell

      Version of Record online: 13 SEP 2016 | DOI: 10.1002/pen.24435

    5. Polycarbonate composites: Effect of filler type and melt-blending process on the light diffusion properties

      Na Song, Xingshuang Hou, Siqi Cui, Chaoqun Ba, Dejin Jiao, Peng Ding and Liyi Shi

      Version of Record online: 8 SEP 2016 | DOI: 10.1002/pen.24432

    6. Synthesis, characterization, and thermomechanical properties of liquid crystalline epoxy resin containing ketone mesogen

      Yi-Sheng Lin, Steve Lien-Chung Hsu, Tsung-Han Ho, Shi-Shiun Cheng and Yu-Hsiang Hsiao

      Version of Record online: 8 SEP 2016 | DOI: 10.1002/pen.24437

    7. Improving crystallization behaviors of isotactic polypropylene via a new POSS-sorbitol compound

      Baixuan Feng, Zhenguang Li, Guanyun Chen, Kongying Zhu, Yunhui Zhao and Xiaoyan Yuan

      Version of Record online: 22 AUG 2016 | DOI: 10.1002/pen.24430

    8. Nanoclay reinforced polyethylene composites: Effect of different melt compounding methods

      Sevda Boran, Alper Kiziltas, Esra Erbas Kiziltas, Douglas J. Gardner and Todd S. Rushing

      Version of Record online: 22 AUG 2016 | DOI: 10.1002/pen.24428

    9. Properties of flocs in sludge conditioning by a novel amphoteric polymer with different anionic degrees

      Liang Qi, Xia You, Jian-Hua Cheng and Yong-You Hu

      Version of Record online: 20 AUG 2016 | DOI: 10.1002/pen.24401

    10. Polyimide-carbon nanotubes nanocomposites: electrical conduction behavior under cryogenic condition

      Lalatendu Nayak, Mostafizur Rahaman, Ali Aldalbahi, Tapan Kumar Chaki and Dipak Khastgir

      Version of Record online: 18 AUG 2016 | DOI: 10.1002/pen.24412

    11. Solvent Transport Characteristics of Thermoplastic Elastomer Blends Based on Nylon and NBR

      Jiji Abraham, K. Muraleedharan, C. Radhesh Kumar, Sabu Thomas and Soney C. George

      Version of Record online: 18 AUG 2016 | DOI: 10.1002/pen.24409

    12. Thorium (IV) phosphate-polyaniline composite-based hydrophilic membranes for bending actuator application

      Ajahar Khan, Inamuddin, Ravi Kant Jain and Abdullah M. Asiri

      Version of Record online: 18 AUG 2016 | DOI: 10.1002/pen.24407

    13. Development of high-tenacity, high-modulus poly(ethylene terephthalate) filaments via a next generation wet-melt-spinning process

      Joshua H. Yoon, Huseyin Avci, Mesbah Najafi, Lassad Nasri, Samuel M. Hudson and Richard Kotek

      Version of Record online: 8 AUG 2016 | DOI: 10.1002/pen.24406

    14. Influence of temperature on viscoelastic–viscoplastic behavior of poly(lactic acid) under loading–unloading

      Necmi Dusunceli, Aleksey D. Drozdov and Naseem Theilgaard

      Version of Record online: 8 AUG 2016 | DOI: 10.1002/pen.24404

SEARCH

SEARCH BY CITATION