Geological mapping at a scale of 1:250000 coupled with related researches in recent years reveal well Early Cenozoic paleo-tectonic evolution of the Tibetan Plateau. Marine deposits and foraminifera assemblages indicate that the Tethys-Himalaya Ocean and the Southwest Tarim Sea existed in the south and north of the Tibetan Plateau, respectively, in Paleocene-Eocene. The paleo-oceanic plate between the Indian continental plate and the Lhasa block had been as wide as 900km at beginning of the Cenozoic Era. Late Paleocene transgressions of the paleo-sea led to the formation of paleo-bays in the southern Lhasa block. Northward subduction of the Tethys-Himalaya Oceanic Plate caused magma emplacement and volcanic eruptions of the Linzizong Group in 64.5–44.3 Ma, which formed the Paleocene-Eocene Gangdise Magmatic Arc in the north of Yalung-Zangbu Suture (YZS), accompanied by intensive thrust in the Lhasa, Qiangtang, Hoh Xil and Kunlun blocks. The Paleocene-Eocene depression of basins reached to a depth of 3500–4800 m along major thrust faults and 680–850 m along the boundary normal faults in central Tibetan Plateau, and the Paleocene-Eocene depression of the Tarim and Qaidam basins without evident contractions were only as deep as 300–580 m and 600–830 m, respectively, far away from central Tibetan Plateau. Low elevation plains formed in the southern continental margin of the Tethy-Himalaya Ocean, the central Tibet and the Tarim basin in Paleocene-Early Eocene. The Tibetan Plateau and Himalaya Mts. mainly uplifted after the Indian-Eurasian continental collision in Early-Middle Eocene.

Little attention had been paid to the intracontinental strike-slip faults of the Tibetan Plateau. Since the discovery of the Longriba fault using re-measured GPS data in 2003, an increasing amount of attention has been paid to this neglected fault. The local relief and transverse swath profile show that the Longriba fault is the boundary line that separates the high and flat tomography of the Tibet plateau from the high and precipitous tomography of Orogen. In addition, GPS data shows that the Longriba fault is the boundary line where the migratory direction of the Bayan Har block changed from eastward to southeastward. The GPS data shows that the Longriba fault is the boundary fault of the sub-blocks of the eastern Bayan Har block We built three-dimensional models containing the Longriba fault and the middle segment of the Longmenshan fault, across the Bayan Har block and the Sichuan Basin. A nonlinear finite element method was used to simulate the fault behavior and the block deformation of the Eastern Tibetan Plateau. The results show that the low resistivity and low velocity layer acts as a detachment layer, which causes the overlying blocks to move southeastward. The detachment layer also controls the vertical and horizontal deformation of the rigid Bayan Har block and leads to accumulation strain on the edge of the layer where the Longmenshan thrust is located. After a sufficient amount of strain has been accumulated on the Longmenshan fault, a large earthquake occurs, such as the 2008 Wenchuan earthquake. The strike slip activity of the Longriba fault, which is above the low resistivity and low velocity layer, partitions the lateral displacements of the Bayan Har block and adjusts the direction of motion of the Bayan Har block, from the eastward moving Ahba sub-block in the west to southeastward moving Longmenshan sub-block in the east. Four models with different depths to the Longriba fault were constructed: (1) a shallow fault with a depth of only 4 km, (2) a deeper fault that is half as deep as the Longmenshan fault, (3) a deep fault that is 2 km shallower than the low resistivity and low velocity layer, and (4) a fault that is as deep as the low resistivity and low velocity layer. The activity and influence of the Longriba fault with different development stage under this tectonic system were shown: in one Earthquake recurrence period, the rupture region of the fault increases with the depth of the fault, and the lateral slip partition by the fault also changes with the fault depth. It suggests that the Longriba fault is a newly generated fault that developed after the quick uplift in Late Cenozoic along this tectonic setting and gradually extended from the northwest to southeast. The calculations provide the characteristic of block deformation and fault behaviors of intra-continental strike-slip fault and major boundary thrust faults in the eastern margin of the Tibet plateau. Although the low resistivity and low velocity layer controls the deformation of the Bayan Har block and the uplift of the Longmenshan thrust, the partition of the Longriba fault has an important influence on the intra-plate deformation and modern geomorphic evolution.

Modern geodetic techniques have developed rapidly in recent years, providing reliable observation data and new effective approaches, and greatly enhancing studies of the Tibetan geodynamics. For instance, the well-known GPS technique has been employed to measure seismic slips for many faults in the Tibetan Plateau. GPS data agree well with the hypothesis of a thickening crust and eastward mass flow. Moreover, absolute gravimetric data have been applied to interpret geophysical phenomena such as crust movement, co-seismic gravity change, GIA, and ground water change. The satellite gravity mission GRACE launched in 2002 provided global gravity models with unprecedentedly high precision and high spatial resolution. It has been used in implementing temporal gravity changes and improving our knowledge of the Earth's interior, including lithosphere dynamics, mantle viscosity and rheology, plateau uplift, and subduction processing. It is noteworthy that gravity presents unique advantages for the study of Tibetan geodynamics because of its sensitivity to mass migration and dynamic redistribution. To date, great advances have been made in applying modern geodetic data in studying dynamic changes of Tibetan plateau. For instance, the horizontal displacement field from GPS data revealed dynamical characteristics of the present-day Tibetan plateau. The combination of gravity anomalies and topographic data describe the tectonic characteristics of Tibetan plateau. The combination of gravity data and GPS data show present properties of the Tibetan plateau such as crust thickening, Moho's subsidence, and plateau uplift. GRACE data were used to estimate the distribution of ice/snow melting. These results demonstrate that mere application of integrated geodetic data as well as geophysical methods and numerical simulations can enhance our knowledge of Tibetan plateau dynamics. It must be pointed out that GRACE data include various geophysical signals such as crust vertical movement, denudation, ice and snow melting, GIA, ground water change, and permafrost degradation. To separate the tectonic information from other impulses, each physical signal must be evaluated and corrected carefully from the GRACE data. The Tibetan geodynamic problem is a complicated and synthetic issue that must be addressed through collaboration of workers in many fields. Succinctly put, although great achievements have been made in studying Tibetan plateau dynamics from each field, the dynamical process remains unclear. Some fundamental problems remain unresolved. They should be solved with modern geodetic data, such as GRACE, GPS, and absolute gravity data, combined with meteorological and geological data, for quantitative analysis of Tibetan plateau dynamics affected by respective geophysical sources. This review article introduces and discusses the scientific importance, advances, problems, and prospects of modern geodesy applied to the study of geodynamic changes of the Tibetan plateau.

The Helegangnaren feldspar granite exposed in the eastern part of East Kunlun, is characterized by high concentrations of SiO₂ and alkaline, low abundances of Fe, Mg and Ca, metaluminous-weak peraluminous. Trace elements analysis shows that the granite is depleted extremely in Ba, Sr and Eu, and rich in some large-ion lithophile elements and high field strength elements. Besides, the granite has high Ga contents, the values of 10⁴(Ga/Al) vary from 2.50 to 2.77, which is mainly greater than the lower limit of A-type granites (2.6), and is higher than the I- and S-type granites’ average (2.1 and 2.28, respectively). Rare earth element (REE) is characterized by relatively high fractionations of light REE (LREE) and heavy REE (HREE) (LREE/HREE=9.3–13.60, (La/Yb)_N=10.92–18.02), pronounced negative Eu anomalies (δEu=0.08–0.13), and exhibits right-dipping gull pattern. Major elements, rare elements and trace elements features show the granite is ascribed to A-type granite and A2 subtype in tectonic genetic type. They are plotted into post-collision or within-plate area in a variety of tectonic discriminations. Geological and geochemical data comprehensively suggest that the granite is formed in a post-collision extensive tectonic setting. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) zircon U-Pb dating yields a weighted mean age of 425 Ma, belonging to Middle Silurian, which is similar to the age of the post-collision geological events in the region. The differences of magmatic rocks in formation age, rocks assemblage and rocks series systematically indicate that the regional tectonic stress regime in the East Kunlun orogenic belt experienced a major transformation from compress to extension in Middle Silurianin, and the Helegangnaren feldspar granite intruded in the early stage of tectonic transformation.

Late Hercynian-early Indosinian (Triassic) granite is widely distributed around the Taer region of the northern margin of West Kunlun. The rock mass is mainly composed of calcalkaline porphyroid biotite adamellite and characterized by SiO₂-rich, high-Ca, moderate-alkaline, and strongly peraluminous attributes, and relatively low ΣREE with LREE enrichment and a moderate Eu anomaly. As shown in the trace element spider web diagram, distinct peaks appear for Th, La, Nd, and Zr and clearly low values appear for Ba, Nb, Sr, P, and Ti. Further, compared with the primitive mantle, Rb/Sr and Rb/Ba are considerably higher and Nd/Th and Nb/Ta are relative low, all falling into the scope of the crust-origin rocks, indicating the characteristics of the crust-origin S-type granite. The rock mass's zircon U-Pb isotopic age is determined to be 235.7 ± 3.9 Ma. On the basis of the age data, spatio-temporal location, lithology, and geochemistry of the rock mass, we conclude that the formation of the rock mass is closely related to the strong compressional orogenic movement (240 Ma) of the Tianshuihai terrane and the South Kunlun terrane. The rock mass is the product of the collision orogenic movement. However, distinct differences are observed between the studied rock mass and the synorogenic Bulunkou rock mass, which may be caused by the different collision strength and different positions with respect to the collision zone.

The studies on configuration, character/property of the basement of Qiangtang basin is helpful for evaluating petroleum and nature gas resources as well as understanding the basin evolvement. Recently a moderate to high-grade metamorphic gneiss rock was found underlying beneath very low metamorphic Ordovician strata in Mayer Kangri to the north of the central uplift. That fact actually proved existence of the crystalline basement just the distribution and structures of pre-Paleozoic crystalline basement still remain puzzle. In recent years a number of active sources deep seismic profiling, to aim at lithospheric structure of northern Tibet and petroleum resources of the Qiangtang basin, had been conducted that make it possible to image the structure of the basement of the Qiangtang. Near vertical reflection profiles, included those acquired previously and those during 2004 to 2008, have been utilized in this study. By through the interaction process and interpretation between the reflection profiles and the wide-angle profile, a model with the detailed structure and velocity distribution from surface to the depth of 20 km of Qiangtang basin has been imaged. Based on the results and discussions of this study, the preliminary conclusions are as follows: (1) The velocity structure section (∼20 km) that is interactively constrained by the refraction and reflection seismic data reveals that the sedimentary stratum gently lie until 10 km in the south Qiangtang basin. (2) The basement consists of fold basement (the upper) and crystalline basement (the lower). The fold basement buried at the average depth of 6 km with a velocity of 5.2–5.8 km/s. The shallowest appear at range of the central uplift. The crystalline basement is underlying beneath the fold basement at the average depth of 10 km with a velocity of 5.9–6.0 km/s except near Bangong-Nujiang suture. (3) The high-velocity body at the depth range of 3–6 km of the central uplift is considered as a fragment of the crystalline basement that perhaps was raised by Thermal or deformation. (4) The lower-consolidated fold basement show more affinity of Yangtze block but the crystalline basement seems more approximate to Lhasa terrene in geophysical nature. We have attempted to improve the resolution and reliability by interaction of the active seismic data and prove it effective to image complex basement structure. It will be a potential to process the piggy-back acquisition data and has wide prospects.

The Triassic petrostratigraphic system and chronologic stratigraphic sketch have been updated and perfected in the Qiangtang area, Qinghai-Tibet Plateau based on the integrated 1:250000 regional geological survey and the latest research progeny. The first finished 1:3000000 Triassic tectonic lithofacies paleogeographic maps in the Qiangtang area shows that the Triassic tectonic unit in the Qiangtang area can been divided into three parts from north to south: northern Qiangtang block; Longmucuo-Shuanghu suture zone; and southern Qiangtang block.

The early-middle Triassic tectonic paleogeography in the Qiangtang area is divides into three sub-units: northern Qiangtang passive continental marginal basin (NQPB), Longmucuo- Shuanghu residual basin (LSRB) and southern Qiangtang residual basin (SQRB). The NQPB can be subdivided into four paleogeography units: The Tanggula-Zangxiahe shallow and bathyal sea; The Wangquanhe-Yingshuiquan carbonate platform; The Rejuechaka-Jiangaidarina littoral- shallow sea; and Qiangtang central uplift. The above units of The NQPB possess EW trend, geomorphology high in the south and low in the north, the seawater depth northward. The basinal paleo-current direction is unidirectional, and basinal tectonic subsidence center is in accord with the depo-center, located in the Tanggula-Zangxiahe belt, north of the basin. The sedimentation and tectonic evolution of the NQPB are characterized with passive continental marginal basin. The Qiangtang central orogenic denuded area (ancient land) may be as a sedimentary materials source of the NQPB. SQRB can be divided into two units: Duoma carbonate platform and southern Qiangtang neritic-deep sea.

The late Triassic tectonic paleogeography in the Qiangtang area is the framework of the “archipelagic-sea” as a whole, and it may be divided into three sub-units: northern Qiangtang back-arc foreland basin(NQFB), Longmucuo-Shuanghu residual basin(LSRB) and southern Qiangtang marginal-sea basin(SQMB). Thereinto, NQFB can be divided into five paleogeography units: the Zangxiahe-Mingjinghu bathyal basin characterized with the flysch; the Tanggula shallow-sea shelf with the fine-clastics; the Juhuashang platform with carbonates; the Tumenggela-Shuanghu coastal-delta with coal-bearing clastics and the Nadigangri- Geladandong arc with volcanics and tuffs. In transverse section, the NQFB fills is wedge-shaped, and the sediments characterized with thicker in north and thinner in south, and with double materials derived from the Ruolagangri orogenic belt in north and the Shuanghu central orogenic belt in south. The late Triassic depocenter of NQFB is located in the middle of the basin, the Yakecuo-Bandaohu-Quemocuo belt, but the subsidence center in the north, the Zangxiahe- Mingjinghu belt, and basinal tectonic subsidence center not concordant with the depo-center. Late Triassic, the SQMB may be divided into three sub-units: Xiaochaka shallow-sea; Riganpeicuo platform; and South Qiangtang southern bathyal basin. In transverse section, the basement of the SQMB is characterized with low in the northern and southern, but high in the middle; forming wedge shaped sediments with thicker in the north and thinner in the south; the sedimentary materials derived from the Qiangtang central uplift and Nadigangri arcs in north. The late Triassic subsidence centre of the SQMB is located in the northern (Xiaochaka area), but the depocenter in the southern (Qixiancuo Suobucha area). The sedimentation and tectonic evolution of the SQMB are characterized with marginal sea.

The Xigaze ophiolite is located in the middle section of the Yarlung Zangbo River ophiolite belt and includes a well-preserved sequence section of seven ophiolite blocks. The relatively complete ophiolitic sequence sections are represented by Jiding, Dejixiang, Baigang, and Dazhuqu ophiolites and consist of three–four units. The complete ophiolite sequence in order from the bottom to top consists of mantle peridotite, cumulates, sheeted sill dike swarms, and basic lavas±radiolarian chert. These cumulates are absent in the remaining blocks of Dejixiang and Luqu. The age of radiolaria in the radiolarian chert is Late Jurassic–Cretaceous. The basalt and ultramafic rock of the ophiolite also are overlaid by Tertiary Liuqu conglomerate, which contains numerous pebble components of ophiolite, indicating that the Tethys Ocean began to close at the end of Cretaceous Period. The isotopic data of gabbro, diabase, and albite granite in the Xigaze ophiolite are approximately 126–139 Ma, which indicates that the ophiolite formed in the Early Cretaceous. The K-Ar age of amphibole in garnet amphibolite in the ophiolite mélange is 81 Ma, indicating that tectonic ophiolite emplacement occurred at the end of Late Cretaceous. Research in petrology, petrological chemistry, mineralogy, and geochemistry of volcanic rocks and dikes of the Xigaze ophiolite indicate the following characteristics: (1) They are mainly composed of basalt, basaltic andesite, dolerite, and diabase and are characterized by high TiO₂ (0.7–1.47%), low MgO (mostly less than 8%), and low SiO₂ (mostly less than 53%). (2) The volcanic rocks and dikes of the Xigaze ophiolite show light rare earth element (LREE)-depleted rare earth element (REE) patterns. (3) The spider diagrams of the volcanic rocks and dikes of the Xigaze ophiolite exhibit LILE depletion relative to high-field-strength element (HFSE) patterns with left oblique features. (4) No protogenetic olivine and clinoenstatite was detected. (5) Some dikes show low TiO₂ and high MgO, in which a few of Cr-enriched spinels and a very few pseudomorphs of olivine, orthopyroxene can be seen. They show more distinctive affinity as boninitic rock and canbe classified to boninite series rock. The previously mentioned features of the volcanic rocks and dikes in the Xigaze ophiolite implies that these ophiolites formed in a mid-ocean ridge (MOR) in the earlier stage and than forearc extension of subduction initiation occurred once at the later stage of the evolution of the Xigaze ophiolite. The forearc extention caused further melting of the residue-depleted mantle, resulting in the formation of melts with lower TiO₂ and higher MgO. These melts formed as dikes and intruded into the oceanic crust formed in the earlier stage, resulting in a close association of mid-ocean ridge basalt and the boninite rock of the Xigaze ophiolite.

Taoxinghu metamorphic peridotite is a firstly reported mantle sequence of ophiolite since Longmuco-Shuanghu-Lancangjiang suture zone (LSLSZ) was proposed, and it is also an important discovered for ophiolite studying in central Qiangtang. Based on detailed analyses of whole–rock geochemistry of Taoxinghu metamorphic peridotites and contrast to metamorphic peridotites in typical ophiolites worldwide, the paper investigates their petrogenesis and geological implication. The petrologic results show that the protolith of Taoxinghu metamorphic perdotites have the mineral assemblage and texture characteristic of mantle peridotite. Most metamorphic peridotites hav near global abyssal peridotites major elements contents, while the few is similar to SSZ-type peridotites. They exhibit typically U-shaped REE patterns, characterized by slight enrichment of LREE and HREE relative to MREE and a low fractionated LREE to HREE segment. Trace elements contents are low and all samples are strong enrichment in Cs, U, Pb, weak enrichment in Ba and depletion in Th, but negative Nb anomalies are only observed in few samples. That suggests Taoxinghu metamorphic peridotites have depletion mantle and suprasubduction affinities. A two-stage evolution history is considered: Taoxinghu metamorphic peridotites originated as the residue from melting at a ridge with 7%-20% degree of fraction melting and were subsequently modified by interaction with mafic melt and aqueous fluid within mantle wedge on subducted zone. Combined with previous studies, we preliminarily propose Taoxinghu metamorphic peridotites may be the Products of initial rifting of palo–Tethys, forming at middle Ordivician-upper Cambrian, and they may be the direct evidences for spreading of palo–Tethys.

The general classification of intermediate-acid intrusive rocks in the metamorphic zone of Gaoligong Mountains as one of the metamorphic terranes of Proterozoic Gaoligong Mountains is problematic regarding the intrusion stage and age, as well as the subsequent metamorphism and deformation. In this study, we investigated granitic gneiss in the metamorphic zone of Gaoligong Mountains based on the 1:50,000 regional geological survey of Qushi Street (2011–2013) and SHRIMP U-Pb zircon geochronology. Results showed that the SHRIMP U-Pb zircon dating of granitic gneiss ranged from 163.5±5.7 Ma to 74.0±2.0 Ma. Thus, the granitic gneiss was grouped into orthometamorphic rocks (metamorphic intrusions). The dating data of granite rocks associated with intense metamorphism and deformation were divided into three groups, 163.5±5.7 to 162.3±3.1 Ma, 132.2–101.0 Ma and 99.4±3.5–74.0±2.0 Ma, which respectively represented three independent geologic events including an important magma intrusion with superimposed metamorphic effects in the late Middle Jurassic, regional dynamic metamorphism and superimposed reformation of fluid action in the early Cretaceous, and dynamic metamorphism dominated by ductile shear and metamorphism starting from the late Cretaceous.

The Langdu high–K calc–alkaline intrusions are located in the Zhongdian area, which is the southern part of the Yidun island arc. These intrusive rocks consist mainly of monzonite porphyry, granodiorite, and diorite porphyry. The K₂O content of majority of these rocks is greater than 3%, and, in the K₂O-SiO₂ diagram, all the samples fall into the high-K calc-alkaline to shoshonitic fields. They are enriched in light rare earth elements (LREEs) and depleted in heavy rare earth elements (HREEs; La_N/Yb_N= 14.3–21.2), and show slightly negative Eu anomalies (δEu = 0.77–1.00). These rocks have high K, Rb, Sr, and Ba contents; moderate to high enrichment of compatible elements (Cr = 36.7–79.9 ppm, Co = 9.6–16.4 ppm, and MgO = 2.2%-3.4%); low Nb, Ta, and Ti contents, and characteristic of low high field strength elements(HFSEs) versus incompatible elements ratios (Nb/Th = 0.75, Nb/La = 0.34) and incompatible elements ratios (Nb/U = 3.0 and Ce/Pb = 5.1, Ba/Rb = 12.0). These rocks exhibit restricted Sr and Nd isotopic compositions, with (⁸⁷Sr/⁸⁶Sr)_i values ranging from 0.7044 to 0.7069 and ε_Nd(t) values from −2.8 to −2.2. The Sr-Nd isotope systematic and specific trace element ratios suggest that Langdu high-K calc-alkaline intrusive rocks derived from a metasomatized mantle source. The unique geochemical feature of intrusive rocks can be modeled successfully using different members of a slightly enriched mantle, a slab–derived fluid, and terrigenous sediments. It can be inferred that the degree of partial melting and the presence of specific components are temporally related to the tectonic evolution of the Zhongdian island arc. Formation of these rocks can be explained by the various degrees of melting within an ascending region of the slightly enriched mantle, triggered by the subduction of the Garzê–Litang ocean, and an interaction between the slab–derived fluid and the terrigenous sediments.

In the Tarim Basin of northwestern China hydrocarbon deposits have been discovered in parts of the thick strata of Cambrian dolostones. Based on petrographic study, six types of dolostone have been distinguished: Type-1, pink mud-bearing silty crystalline dolostone (PMSD); Type-2, gypsum- and salt-bearing fine crystalline dolostone (GSFD); Type-3, fine crystalline dolostone with dolomite crystals with cloudy core and clear rim (CCFD); Type-4, deep gray mud-bearing silty crystalline dolostone (GMSD); Type-5, euhedral coarse crystalline dolostone (ECD); and Type-6, xenotopic coarse crystalline dolostone (XCD). Applying petrographic and geochemical methods, the genesis of the dolostones is studied in this paper. Normally, Type-1 dolostone shows U- and Mo-depleted characteristics, reflecting a more oxidized formation environment; High δ⁸O and the purple color are consistent with formation of Sabkha dolostones on a supratidal flat. Types 2, 3, 4 dolostones show strata formation, similar REE patterns and ⁸⁷Sr/⁸⁶Sr ratios with contemporaneous limestones, suggesting a penecontemporaneous origin from seawater. Types 5 and 6 dolostones commonly occur as interbedded rocks, indicating secondary genesis after diagenesis. Type-6 dolostone has the highest order degree (OD) values (average 0.86), the lowest oxygen isotope values and positive Eu anomalies, which are consistent with previously reported hydrothermal dolostones. Differently, Type-5 shows euhedral texture, higher δ¹⁸O value, similar REE characteristic and ⁸⁷Sr/⁸⁶Sr ratios in comparison with contemporaneous limestones, suggesting that this type might have been dolomitized by down-transferring evaporated seawater during shallow burial stage. Dolostone fluid sources, formation environments and crystallizing dynamics are summarized and possible genetic models for the six types are proposed.

The ore types of the Zhaokalong Fe-Cu deposit are divided into two categories: sulfide-type and oxide-type. The sulfide-type ore include siderite ore, galena-sphalerite ore and chalcopyrite ore, whereas the oxide-type ore include magnetite ore and hematite ore. The ore textures and structures indicate that the Zhaokalong deposit is of the sedimentary-exhalative mineralization type. Geochemical analyses show that the two ore types have a high As, Sb, Mn, Co and Ni content. The REE patterns reveal an enrichment of the LREE compared to the HREE. Isotopic analysis of siderite ore reveal that the δ¹³C_PDB ranges from −2.01 to 3.34 (‰) whereas the δ¹⁸O_SMOW ranges from 6.96 to 18.95 (‰). The fluid inclusion microthermometry results indicate that homogenization temperatures of fluid inclusions in quartz range from 131 to 181°C, with salinity values of 1.06 to 8.04 wt% NaCl eq. The mineralizing fluid therefore belongs to the low temperature – low salinity system, with a mineralizing solution of a CO₂-Ca²⁺(Na⁺, K⁺)-SO₄²⁻ (F⁻, Cl⁻)-H₂O system. The geochemical results and fluid inclusion data provide additional evidence that the Zhaokalong deposit is a sedex-type deposit that experienced two stages of mineralization. The sulfide mineralization probably occurred first, during the sedimentary exhalative process, as exhibited by the abundance of marine materials associated with the sulfide ores, indicating a higher temperature and relatively deoxidized oceanic depositional environment. After the main exhalative stage, hydrothermal activity was superimposed to the sulfide mineralization. The later stage oxide mineralization occurred in a low temperature and relatively oxidized environment, in which magmatic fluid circulation was dominant.

Benthic foraminifera, preserved in the Late Cretaceous organic carbon-rich sediments of Gamba, southern Tibet, provide high-resolution proxies for sea-level changes and dissolved oxygen fluctuations of southeastern Tethys. The fossils were statistically analyzed and divided into three faunas of “Cenomanian fauna”, “Turonian fauna”, and “Coniacian fauna”. A middle neritic-upper bathal environment (50–250m) was estimated considering the ratios of planktonic and epifaunal benthic foraminifera (P/(P+E)), the morphological analysis according to the studies of recent foraminifera and the abundant distributions of depth-related species such as Alabamina creta, Laevidentalina sp., Praebulimina spp., Pleurostomella cf. naranjoensis, Pyrulina sp., Quinqueloculina spp., Haplophragmoides spp., etc. The result shows an almost parallel trend with the global transgressive and regressive cycles, but the former fluctuates more frequently at upper Cenomanian, which probably indicates tectonic instability of the continental margin. According to the benthic foraminiferal richness (BFN), Shannon-Weiner diversity (H(s)), as well as benthic foraminiferal oxygen index (BFOI), five periods of oxygen depleted conditions (dysoxic-anoxic) have been recognized. They correspond to the OAE2, the lower Turonian, the upper Turonian, the Turonian-Caniacian boundary event and the probably OAE3. In addition, the oxygen fluctuations in Gamba might be controlled directly by sea-level changes, while the paleoproductivity and oxygen conditions interacted with each other under oxygen deficiency environments.

This paper conducts systematic test research on the 2920 paleomagnetic directional samples taken from Ordovician-Paleogene sedimentary formation in the north slope of Qomolangma in south of Tibet and obtains the primary remanent magnetization component and counts the new data of paleomagnetism the times. Based on the characteristic remanent magnetization component, it calculates the geomagnetic pole position and latitude value of Himalaya block in Ordovician-Paleogene. According to the new data of paleomagnetism, it draws the palaeomagnetic polar wander curve and palaeolatitude change curve of the north slope of Qomolangma in Ordovician-Paleogene. It also makes a preliminary discussion to the structure evolution history and relative movement of Himalaya bloc. The research results show that many clockwise rotation movements had occurred to the Himalaya block in northern slope of Qomolangmain the process of northward drifting in the phanerozoic eon. In Ordovician-late Cretaceous, there the movement of about 20.0° clockwise rotation occurred in the process of northward drifting. However, 0.4° counterclockwise rotation occurred from the end of late Devonian epoch to the beginning of early carboniferous epoch; 6.0° and 8.0° counterclockwise rotation occurred in carboniferous period and early Triassic epoch respectively, which might be related with the tension crack of continental rift valley from late Devonian period to the beginning of early carboniferous epoch, carboniferous period and early Triassic epoch. From the Eocene epoch to Pliocene epoch, the Himalaya block generated about 28.0° clockwise while drifting northward with a relatively rapid speed. This was the result that since the Eocene epoch, due to the continuous expansion of mid-ocean ridge of the India Ocean, the neo-Tethys with the Yarlung Zangbo River as the main ocean basin closed to form orogenic movement and the strong continent-continent collision orogenic movement of the east and west Himalayas generated clockwise movement in the mid- Himalaya area. According to the calculation of palaeolatitude data, the Himalaya continent-continent collusion orogenic movement since the Eocene epoch caused the crustal structure in Indian Plate- Himalaya folded structural belt- Lhasa block to shorten by at least 1000 km. The systematic research on the paleomagnetism of Qomolangma area in the phanerozoic eon provides a scientific basis to further research the evolution of Gondwanaland, formation and extinction history of paleo-Tethys Ocean and uplift mechanism of the Qinghai-Tibet Plateau.

The thick, Eocene to Pliocene, sedimentary sequence in Qaidam Basin at the northern margin of the Tibetan Plateau records the surface uplift history of the northeastern Tibetan plateau. In this study, we present detailed geochemistry, heavy mineral, and clay mineralogy data of the well preserved sedimentary record in the Dahongou section in the northeast of the Qaidam Basin. The results suggest that the sedimentary sequence recorded a 30 Ma young uplift/unroofing event in the northern edge of the Qaidam Basin, which is characterized by high ZTR index value and chlorite content, and low CIW'. The results are consistent with previous sedimentological studies of the Qaidam Basin, which indicated rapid increase of the accumulation rates around 30 Ma. Based on past thermochronological data from the mountains around the Qaidam Basin and the accumulation rates of the Cenozoic basins in the northeastern Tibetan Plateau, we infer a regional uplift and denudation event along the northeastern Tibetan Plateau during early Oligocene (∼30 Ma), indicating that the Tibetan Plateau had expanded north-eastward of the study area at that time.

The Biluo Co and Amdo 114 station, northern Tibet, cropping out the Early Toarcian and Middle-Late Tithonian (Jurassic) organic-rich black shales, have been a focus to petroleum geologists in discussing their oil-producing potential. This paper first reports the trace elements and rare earth elements to discuss the paleoenvironments, redox conditions and sedimentary mechanisms of those black shales. Both sections exhibit variation in trace element abundances with concentrations <0.1 ppm to 760 ppm, mostly enriched in V, Cr, Ni, Cu, Zn, Mo, Ba and U. Element ratios of Ni/Co, V/Cr, U/Th and V/(V+Ni) plus U were used to identify redox conditions. The shale-normalized rare earth element (REE) patterns are characterized by the flat-shale type with instable Ce anomalies and very weekly positive Eu anomalies. Positive Ce_anom values are significant with values varying between −0.064 and 0.029 in Biluo Co, which may be interpreted as release of REE and input of riverine terrestrial matter with rich Ce (resulting in pH change) during the anoxic conditions. In the middle parts of Amdo 114 station, distinct negative Ce_anom values are observed (−0.238 to −0.111) and associated surface water warming were interpreted as being related to a major sea level rise. In contrast, the formation of the black shales in the lower and upper part of the studied succession took place during a cooler (Ce_anom values >−0.10), lower surface water productivity, and lower sea-level stage. Thus, we emphasize the role of different factors that control the formation of local and regional black shales. The most important factors are sea-level fluctuations and increasing productivity.

We have studied the evolution of the tectonic lithofacies paleogeography of Paleocene–Eocene, Oligocene, Miocene, and Pliocene of the Qinghai–Tibet Plateau by compiling data regarding the type, tectonic setting, and lithostratigraphic sequence of 98 remnant basins in the plateau area. Our results can be summarized as follows. (1) The Paleocene to Eocene is characterized by uplift and erosion in the Songpan–Garzê and Gangdisê belts, depression (lakes and pluvial plains) in eastern Tarim, Qaidam, Qiangtang, and Hoh Xil, and the Neo-Tethys Sea in the western and southern Qinghai–Tibet Plateau. (2) The Oligocene is characterized by uplift in the Gangdisê–Himalaya and Karakorum regions (marked by the absence of sedimentation), fluvial transport (originating eastward and flowing westward) in the Brahmaputra region (marked by the deposition of Dazhuka conglomerate), uplift and erosion in western Kunlun and Songpan-Garzê, and depression (lakes) in the Tarim, Qaidam, Qiangtang, and Hoh Xil. The Oligocene is further characterized by depressional littoral and neritic basins in southwestern Tarim, with marine facies deposition ceasing at the end of the Oligocene. (3) For the Miocene, a widespread regional unconformity (ca. 23 Ma) in and adjacent to the plateau indicates comprehensive uplift of the plateau. This period is characterized by depressions (lakes) in the Tarim, Qaidam, Xining–Nanzhou, Qiangtang, and Hoh Xil. Lacustrine facies deposition expanded to peak in and adjacent to the plateau ca. 18–13 Ma, and north–south fault basins formed in southern Tibet ca. 13–10 Ma. All of these features indicate that the plateau uplifted to its peak and began to collapse. (4) Uplift and erosion occurred during the Pliocene in most parts of the plateau, except in the Hoh Xil–Qiangtang, Tarim, and Qaidam. The continuous uplift and intensive taphrogeny in the plateau divided the original large basin into small basins, deposition of lacustrine facies decreased considerably, and boulderstone accumulated, indicating a response to the overall uplift of the plateau. Here, we discuss the evolution of tectonic lithofacies paleogeography in Cenozoic and its response to the tectonic uplift of the Qinghai-Tibet Plateau in relation to the above characteristics. We have recognized five major uplift events, which occurred during 58–53 Ma, 45–30 Ma, 25–20 Ma, 13–7 Ma, and since 5 Ma. The results presented here indicate that the paleogeomorphic configurations of the Qinghai–Tibet Plateau turned over during the late Miocene, with high elevations in the east during the pre-Miocene switching to high contours in the west at the end of Miocene.

The timing of onset of deposition of the Lulehe Formation is a significant factor in understanding the genesis of the Qaidam basin and the evolution of the Tibetan Plateau. Here, we describe a detailed magnetostratigraphic and magnetic fabric study of the middle and lower parts of the Lulehe Formation. A total of 234 samples were collected from 117 sites throughout a thickness of almost 460 m of fluvial and lacustrine deposits at the Xitieshan section in the northeastern Qaidam basin. Out of these sites, 94 sites yielded well-defined characteristic remanent magnetization components by stepwise thermal demagnetization and were used to establish the magnetostratigraphy of the studied section. Based on correlation with the geomagnetic polarity timescale, the studied section spans the period from 53.8 Ma to 50.7 Ma. Our results show a three-fold decrease in sedimentation rates as well as marked change in facies from braided river to delta and shore–shallow lake around 52.6 Ma, which suggests tectonic uplift of the northeastern Qaidam basin margin ridge was rapid at the onset of formation of the Qaidam basin and subsequently weakened after 52.6 Ma. The anisotropy of magnetic susceptibility results indicate that tectonic compression stress had reached the northeastern Tibetan Plateau by the early stages of Indo–Eurasian plate collision and that the direction of stress in the study area was NE–SW. Furthermore, a weakening of tectonic compression stress around 52.6 Ma is consistent with sedimentary records. The age of initial deposition of the Qaidam basin (around 53.8 Ma) was almost synchronous with that of the Qiangtang, Hoh Xil, Xining, and Lanzhou basins, which implies that stress was transferred rapidly through the Tibetan Plateau during or immediately after the onset of Indo–Eurasian collision.

This paper presents a description of the river terrace at Tangjia Village in Lhasa, Tibet. Selected types of phytolith and pollen were used as proxies to study the paleoclimate in the study area. Ancient climate and vegetation changes since 10 ka BP were examined. The results demonstrated that between 10.2 and 8.9 ka BP, the dominating phytolith was the cold type and the dominating vegetation type was grassland-forest. This indicated that the climate changed from cool-humid to cool-dry and later turned back into a cool-humid climate. Between 8.9 and 8.1 ka BP, the main types of phytoliths were tooth, dumbbell, and polyhedral. This suggests that the vegetation consisted of forest-grassland and the period's climate had become warmer. Between 8.1 and 6.7 ka BP, the warm index of phytolith assembelage gradually increased, whereas the spore and pollen assembelage revealed that the vegetation was forest with hardwood. This suggested that the paleoclimate was warmest in this period. The herbaceous vegetation increased gradually, indicating that the climate had become colder since 7.5 ka BP. Between 6.7 and 4.6 ka BP, cold type phytolith such as tooth and cap were found. Simultaneously, the pollen assembelage indicated that the vegetation shifted from grassland to forest and then turned back into grassland. This implies that the climate fluctuated from cold-dry to cool-humid. Between 4.6 and 1.9 ka BP, the dominate type of phytolith was cold type and its warm index was in the range 0.04–0.28, suggesting a herbaceous vegetation cover and indicating that the climate was cold. The phytolith warm index from 1.9 ka BP revealed that the climate was continuously decreasing, and most of the pollen assembelage consisted of Chenopodiaceae and Artemisia. This conclusion is in agreement with the phytolith result that indicates that the climate was becoming colder and colder.

Since the Quaternary, many lakes have been present in the Qinghai-Tibetan Plateau. As peculiar geological processes in the evolution of the uplifting of Qinghai-Tibetan Plateau, the distributions and evolutions of the Quaternary paleolakes in the Qinghai-Tibetan Plateau have been the focus of interest among the international geosciences circle. Comparisons of the newly obtained and existing data from field surveys, remote sensing images, characteristics of tectonic landforms and distribution of the lacustrine strata, the author have, for the first time, defined a large-sized Quaternary Qiangtang Paleolake. The paleolake starts from the east-westerly direction at Rutog in western Tibet, passing through Gêrzê, and finally ends at Nagqu in eastern Tibet. Its length is approximately 1,200 km; it is about 420 km at its widest point (north-southerly). The Paleolake forms an E-W (or NWW) ellipsoid with an estimated area of 354920 km². The Paleolake is bordered by the Mts. Gangdisê and Nyainqêntanglha to the south and the Karakorum Pass-Tozê Kangri-Zangbagangri- Tanggula Pass to the north. It generally appears as a basinal landform with low mountains and valleys in the central part (altitudes of 4400 m) and higher altitudes (5000 m) in the peripheries. The formation and development of the Paleolake was controlled by the nearly E-W trending structures. There are three east-westerly extending tectonic sutures inside the Paleolake area, from north to south: (1) the Shuanghu Suture; (2) the Bangong Co-Nujiang River Suture; (3) the Shiquanhe-Lhari Suture. These three sutures have generally controlled the spreading features of the Paleolake and act as the first grade lake-controlling structures. In the southern Paleolake basin, there are a series of south-northerly rift basins, which are controlled by the normal faults and exist as a series of south-northerly grabens and semi-graben faulted basins. The south-northerly rift zones have clearly exerted control over the south margin of the Paleolake as well as the distribution of the residual lake basins after the Paleolake's break up. They are the secondary lake-controlling tectonics. Discoveries of the lacustrine strata inside the Plateau, especially the successive discoveries of many high-stand lacustrine strata, are direct evidence supporting the existence of the paleolakes in the Plateau. The dating results of the lake-eroded travertine in the Dong Co in the hinterland of the Quaternary Qiangtang Paleolake have revealed that the lake-eroded travertine is of Late Pleistocene sediments. By considering the analysis of the lacustrine strata as well, the researchers have revealed that the Quaternary Qiangtang Paleolake begins its embryonic form in the Early Pleistocene, successively develops till the Middle Pleistocene, and reaches its full blossom in the middle stage of the Late Pleistocene; it further shrinks and separates by the end of the Late Pleistocene, and finally ceases its whole life as the paleolake. After the Holocene, the huge Late Pleistocene Qiangtang Paleolake no longer exists, leaving a series of widely distributed smaller lakes on the Qiangtang Plateau. These smaller, isolated water systems receive the Holocene lacustrine sediments.

Three magnitude >6 earthquakes struck Qaidam, Qinghai province, China, in November 10^th 2008, August 28^th and 31^st 2009 respectively. The Zongwulongshan fault has often been designated as the active seismogenic structure, although it is at odd with the data. Our continuous GPS station (CGPS), the Xiao Qaidam station, located in the north of the Qaidam basin, is less than 30 km to the southwest of the 2008 earthquake. This CGPS station recorded the near field co-seismic deformation. Here we analyzed the co-seismic dislocation based on the GPS time series and the rupture processes from focal mechanism for the three earthquakes. The aftershocks were relocated to constrain the spatial characteristics of the 2008 and 2009 Qaidam earthquakes. Field geological and geomorphological investigation and interpretation of satellite images show that the Xitieshan fault and Zongwulongshan fault were activated as left lateral thrust during the late Quaternary. Evidence of folding can also be identified. Integrated analyses based on our data and the regional tectonic environment show that the Xitieshan fault is the fault responsible for the 2008 Qaidam earthquake, which is a low dip angle thrust with left lateral strike slip. The Zongwulongshan fault is the seismogenic fault of the 2009 earthquakes, which is a south dipping back thrust of the northern marginal thrust system of the Qaidam basin. Folding takes a significant part of the deformation in the northern marginal thrust system of the Qaidam basin, dominating the contemporary structure style of the northern margin of the Qaidam basin and Qilianshan tectonic system. In this region, this fault and fold system dominates the earthquake activities with frequent small magnitude earthquakes.