Volume 15, Issue 11 p. 1076-1081
Full Paper

Growth of Sputtered Nanocomposite Alloys on Polymeric Substrates: The Role of the Substrate's Mechanical Hardness

Kamil Zuber,

Mawson Institute, University of South Australia, Mawson Lakes, SA 5095, Australia

Search for more papers by this author
Elisabeth Downey,

Mawson Institute, University of South Australia, Mawson Lakes, SA 5095, Australia

Department of Chemistry, University of Bath, Bath, BA2 7AY, UK

Search for more papers by this author
Colin Hall,

Mawson Institute, University of South Australia, Mawson Lakes, SA 5095, Australia

Search for more papers by this author
Peter Murphy,

Mawson Institute, University of South Australia, Mawson Lakes, SA 5095, Australia

Search for more papers by this author
Drew Evans,

Corresponding Author

Mawson Institute, University of South Australia, Mawson Lakes, SA 5095, Australia

Mawson Institute, University of South Australia, Mawson LakesSA 5095AustraliaSearch for more papers by this author
First published: 13 August 2013
Citations: 5
This original research was proudly supported by SMR-Technologies and the Commonwealth of Australia, through the Cooperative Research Centre for Advanced Automotive Technology (AutoCRC2020).

Abstract

Thin multilayer structures consisting of a nanocomposite CrZrx alloy on SiO2 are grown by magnetron sputtering onto hard-coated polymeric substrates at 350 K. The grain structure and electrical, optical, and mechanical properties of the nanocomposite alloy were investigated using atomic force microscopy, dc conductivity, spectrophotometry, and nano-scratch testing. Despite the sputtered films being grown in the same deposition run, the grain structure and properties of the thin films were observed to change depending on the siloxane-based hard-coat employed. These studies indicate that in addition to the substrate's roughness, the hardness of the siloxane-based hard-coat correlates well with the changing properties of the sputtered thin films. To rationalize the influence of the substrate hardness, a hypothesis is proposed where the substrate hardness dissipates a portion of the sputtered material's energy upon impact, leading to changes in its residual energy, thus influencing the material's ability to laterally diffuse on the substrate.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.