Rothamsted Repository Download

Chitin is a major structural component of fungal cell walls and acts as a microbe-associated molecular pattern (MAMP) that, on recognition by a plant host, triggers the activation of immune responses. To avoid the activation of these responses, the Septoria tritici blotch (STB) pathogen of wheat, Zymoseptoria tritici , secretes LysM effector proteins. Previously, the LysM effectors Mg1LysM and Mg3LysM were shown to protect fungal hyphae against host chitinases. Furthermore, Mg3LysM, but not Mg1LysM, was shown to suppress chitin- induced reactive oxygen species (ROS) production. Whereas initially a third LysM effector gene was disregarded as a presumed pseudogene, we now provide functional data to show that this gene also encodes a LysM effector, named Mgx1LysM, that is functional during wheat colonization. While Mg3LysM confers a major contribution to Z. tritici virulence, Mgx1LysM and Mg1LysM contribute to Z. tritici virulence with smaller effects. All three LysM effectors display partial functional redundancy. We furthermore demonstrate that Mgx1LysM binds chitin, suppresses the chitin- induced ROS burst, and is able to protect fungal hyphae against chitinase hydrolysis. Finally, we demonstrate that Mgx1LysM is able to undergo chitin- induced polymerization. Collectively, our data show that Z. tritici utilizes three LysM effectors to disarm chitin- triggered wheat immunity.

structural component of fungal cell walls (Free, 2013). Plants secrete hydrolytic enzymes, such as chitinases, as an immune response to target fungal cell wall chitin to disrupt cell wall integrity, and also to release chitin molecules that act as a MAMP that can be recognized by PRRs that carry extracellular lysin motifs (LysMs) to activate further immune responses against fungal invasion (Felix et al., 1993;Sánchez-Vallet et al., 2015). To date, chitin receptor complexes that comprise LysM-containing receptors have been characterized in Arabidopsis and rice (Cao et al., 2014;Miya et al., 2007;Shimizu et al., 2010;Wan et al., 2012). Homologs of the crucial components of these complexes have also been identified in wheat (Lee et al., 2014).
To successfully establish an infection, fungal pathogens evolved various strategies to overcome chitin-triggered plant immunity, such as alteration of cell wall chitin in such way that it is no longer recognized (Fujikawa et al., 2009(Fujikawa et al., , 2012, but also the secretion of effector proteins to either protect fungal cell walls against hydrolytic host enzymes or prevent the activation of chitin-induced immunity (van den Burg et al., 2006;Kombrink et al., 2011;Marshall et al., 2011;Mentlak et al., 2012;Rovenich et al., 2014;Takahara et al., 2016).
For example, some fungi can convert the surface-exposed chitin in fungal cell walls to chitosan, which is a poor substrate for chitinases, thus avoiding the activation of chitin-triggered immune responses during host invasion (El Gueddari et al., 2002;Ride & Barber, 1990).
Furthermore, from the soilborne fungus Verticillium dahliae a secreted polysaccharide deacetylase was characterized to facilitate fungal virulence through direct deacetylation of chitin oligomers, converting them to chitosan (Gao et al., 2019). The use of effector molecules to successfully target chitin-triggered plant immunity has been well-studied for the tomato leaf mould fungus Cladosporium fulvum. This fungus secretes the invertebrate chitin-binding domain (CBM14)-containing effector protein Avr4 to bind fungal cell wall chitin, resulting in the protection of its hyphae against hydrolysis by tomato chitinases (van den Burg et al., 2006;van Esse et al., 2007).
Zymoseptoria tritici (formerly Mycosphaerella graminicola) is a hostspecific hemibiotrophic fungus and the causal agent of Septoria tritici blotch (STB) of wheat (Triticum spp.) (Eyal, 1999). On infection, wheat plants undergo an extended period of symptomless colonization of approximately 1 week, followed by the death of host tissues coinciding with rapid invasive growth and asexual reproduction of the fungus (Glazebrook, 2005;Kema et al., 1996;Pnini-Cohen et al., 2000).
This transition from biotrophic to necrotrophic growth of Z. tritici is associated with the induction of host immune processes such as a hypersensitive response (HR)-like programmed cell death and differential expression of wheat mitogen-activated protein kinase (MAPK) genes (Rudd et al., 2008). Three LysM effector genes were previously identified in the Z. tritici genome (Marshall et al., 2011).
These comprise Mg1LysM and MgxLysM, which encode LysM effector proteins that carry a single LysM only, and Mg3LysM encoding an effector with three LysMs (Marshall et al., 2011). Whereas Mg1LysM and Mg3LysM were subjected to functional analysis, MgxLysM was disregarded because this gene lacked expressed sequence tag (EST) support and was believed to contain an intronic repeat insertion, rendering it a pseudogene. Both Mg1LysM and Mg3LysM were found to be induced during wheat infection, and both proteins were found to bind chitin. However, only Mg3LysM was found to suppress chitininduced plant immunity (Marshall et al., 2011). Surprisingly, and in contrast to Ecp6, both Mg1LysM and Mg3LysM were found to protect fungal hyphae against plant chitinase activity. Recently, a crystal structure was generated and revealed that Mg1LysM undergoes chitin-dependent dimerization of ligand-independent homodimers, and it was proposed that chitin-induced polymerization of Mg1LysM in the fungal cell wall confers protection against chitinases (Sánchez-Vallet et al., 2020). However, thus far the mechanism underlying the protection of cell walls by Mg3LysM remains unclear. In this study, we revisit the previously discarded MgxLysM gene and evaluate its contribution to Z. tritici virulence on wheat plants.

| Mgx1LysM is expressed during wheat colonization
Although MgxLysM was previously reported to be a pseudogene and found not to be induced on wheat infection (Marshall et al., 2011), a more recent transcriptome profiling study on wheat demonstrated MgxLysM expression during host colonization, demonstrating that the initial assessment was incorrect (Rudd et al., 2015). Thus, we propose to rename MgxLysM as Mgx1LysM, according to the single LysM domain in the protein, similar to the previously described Mg1LysM effector (Marshall et al., 2011).
To confirm the expression of Mgx1LysM in Z. tritici on host colonization, we inoculated the wild-type strain IPO323 onto wheat leaves and sampled leaves at 0, 4, 8, 10, and 14 days postinoculation (dpi). In addition, we subjected IPO323 growing in vitro in Czapek-Dox broth (CDB) and in potato dextrose broth (PDB) to expression analysis. We confirmed that Mgx1LysM is not expressed on growth in vitro, but only during host colonization at all tested time points (Figure 1). More specifically, Mgx1LysM expression was strongly induced at 4 dpi, peaked at 8 dpi, and dramatically decreased by 10 dpi. Interestingly, the peak of expression at 8 dpi is around the transition time when the infection switches from asymptomatic to symptomatic with the appearance of lesions on wheat leaves (Marshall et al., 2011).

| Mgx1LysM contributes to Z. tritici virulence on wheat and displays functional redundancy with Mg1LysM and Mg3LysM
Because Mgx1LysM is expressed by Z. tritici during colonization of wheat plants, we further assessed whether Mgx1LysM contributes to Z. tritici virulence and whether it shares functional redundancy with Mg1LysM and Mg3LysM. To this end, we generated the singlegene deletion mutant ∆Mgx1, the double-gene deletion mutants ∆Mg1-∆Mgx1 and ∆Mgx1-∆Mg3, and the triple-gene deletion mutant ∆Mg1-∆Mgx1-∆Mg3 in a ∆ku70 mutant, which is unaltered in virulence but has improved homologous recombination frequencies (Bowler et al., 2010). The absence of Mgx1LysM combined with the presence of the resistance marker (NAT) was confirmed with PCR in two independent transformants for each of the combinations ( Figure S1a). To assess the possibility of additional ectopic insertions, NAT copy numbers in the genomes of single-, double-, and triple-gene deletion mutants were determined with quantitative real-time PCR (qPCR), using Z. tritici β-tubulin as a single gene-copy control. As typically expected for Agrobacterium tumefaciensmediated transformation, all transformants carried a single copy of the transgene, suggesting a single T-DNA insertion ( Figure S1b).
All mutants were generated in the ∆ku70 mutant that was used as wild-type (WT) in this study. By 21 dpi, the WT strain caused typical necrosis symptoms on the wheat leaves, while ∆Mg3 strains caused fewer necrotic symptoms (Figure 2a,b) as previously reported (Marshall et al., 2011). Furthermore, as previously reported, plants inoculated with the ∆Mg1 strains developed similar necrosis as with the WT strain. We now show not only that the ∆Mgx1 strains caused similar levels of necrosis as the WT and ∆Mg1 strains, but also that the ∆Mg1-∆Mgx1 strains showed no apparent decrease in disease development, suggesting that these two LysM effectors are dispensable for virulence of Z. tritici. In line with these observations, both the ∆Mgx1-∆Mg3 strains and the ∆Mg1-∆Mg3 strains induced similar symptoms to the ∆Mg3 strains ( Figure 2a,b). Nevertheless, the necrotic symptoms caused by inoculation with the ∆Mg1-∆Mgx1-∆Mg3 strains were drastically reduced when compared with those caused by the ∆Mg3 strains. Collectively, these findings suggest that Mg3LysM is the most important LysM effector for Z. tritici disease development, and that Mgx1LysM and Mg1LysM contribute to disease development through redundant functionality.
To further substantiate the fungal colonization assessments, we measured fungal biomass with qPCR. While the ∆Mg1 and ∆Mgx1 strains developed similar amounts of fungal biomass as the WT strain, ∆Mg1-∆Mgx1 strains displayed significantly compromised colonization, but not as compromised as the ∆Mg3 strains or the double and triple mutants that lack Mg3LysM (Figure 2c). These observations confirm that the three LysM effectors make differential contributions to symptom display, which is accompanied by distinct differential contributions to fungal colonization. Thus, our findings present evidence for partially redundant, but also partially divergent, contributions of the three LysM effectors to Z. tritici virulence.  , 1996). Thus, we determined the percentage of leaf surface displaying pycnidia coverage at 17 dpi. Surprisingly, repeated assays revealed that the ∆Mg1 strains developed significantly more pycnidia than the WT strain, whereas the ∆Mgx1 strains, like the ∆Mg3 strains, produced no to only a few pycnidia ( Figure S2).

| LysM effectors differentially contribute to Z. tritici pycnidia formation on wheat
Accordingly, whereas the ∆Mg1-∆Mgx1 strains developed an intermediate number of pycnidia, all mutants that involved ∆Mg3 were devoid of pycnidia ( Figure S2). These data first of all suggest that symptom development does not correlate with fungal colonization levels as measured by pycnidia formation and, furthermore, that the three LysM effectors display differential roles in fungal colonization.

| Mgx1LysM binds chitin and suppresses the chitin-induced ROS burst
To investigate how Mgx1LysM contributes to Z. tritici virulence during wheat colonization, we first assessed its substrate-binding characteristics. Mgx1LysM was heterologously expressed in Escherichia coli and subjected to a polysaccharide precipitation assay. Mgx1LysM was incubated with chitin beads and shrimp shell chitin, but also with plant-derived cellulose and xylan, revealing that Mgx1LysM binds chitin beads and shrimp shell chitin but not cellulose or xylan ( Figure 3).

F I G U R E 2
Mgx1LysM contributes to Zymoseptoria tritici virulence on wheat and displays functional redundancy with Mg1LysM and Mg3LysM. (a) Disease symptoms on wheat leaves at 21 days postinoculation (dpi) with the wild-type strain (WT) and LysM effector gene deletion strains. (b) Quantification of the necrotic area on wheat leaves inoculated with WT and LysM effector gene deletion strains at 21 dpi. (c) Fungal biomass determined with quantitative PCR on Z. tritici β-tubulin relative to the wheat cell division control gene, on wheat leaf samples harvested at 21 dpi. Graphs were made with RStudio using the package ggplot2 and different letters indicate significant differences between each inoculation, which were calculated with IBM Statistics 26 with one-way analysis of variance (Duncan, p < .05).

Fungal inoculation experiments were conducted on six plants with six first-primary leaves per inoculation and repeated twice with similar results
To test whether Mgx1LysM can prevent chitin-triggered immunity in plants, the occurrence of a chitin-induced ROS burst was assessed in Nicotiana benthamiana leaf discs on treatment with 10 μM chitohexaose (chitin) in the presence or absence of effector protein.
As previously demonstrated (de Jonge et al., 2010), C. fulvum Ecp6 suppresses ROS production in this assay ( Figure 4). Remarkably, preincubation of 10 μM chitin with 50 μM Mgx1LysM prior to the addition to leaf discs led to a significant reduction of the ROS burst ( Figure 4), demonstrating its ability to suppress chitin-induced plant immune responses. This finding was unexpected because we previously found that its close homolog Mg1LysM cannot suppress a chitin-induced defence response in a tomato cell culture (Marshall et al., 2011), albeit that in that study Mg1LysM was heterologously produced in the yeast Pichia pastoris rather than in E. coli. To revisit this initial observation, we now test whether E. coli-produced Mg1LysM is able to suppress the chitin-induced ROS burst. Indeed, similar to the results obtained for Mgx1LysM, we observed that preincubation of 10 μM chitin with 50 μM Mg1LysM prior to the addition to leaf discs led to a significantly compromised ROS burst. Thus, both LysM effectors can suppress chitin-triggered host immunity.

| Mgx1LysM protects hyphae against chitinases
We previously demonstrated that Mg1LysM can protect fungal hyphae against chitinase hydrolysis (Marshall et al., 2011). To evaluate a possible role in hyphal protection, Mgx1LysM was tested for its ability to protect hyphae of Trichoderma viride, a fungus that exposes its cell wall chitin in vitro, against chitinases (Mauch et al., 1988). The As expected, while the addition of chitinase drastically inhibited T. viride hyphal growth, Avr4 as well as Mg1LysM protected the hyphae against hydrolysis by chitinases from Clostridium thermocellum ( Figure 5) as well as from tomato ( Figure S3). Furthermore, Mgx1LysM similarly protected the hyphae against chitinase hydrolysis ( Figure 5).

| D ISCUSS I ON
In this study, we demonstrate that the previously disregarded LysM  (Stergiopoulos et al., 2010). This may explain why the Z. tritici LysM effectors, in contrast to C. fulvum Ecp6, evolved the ability to protect fungal cell wall chitin. Recently, it has been proposed that the hyphal protection by LysM effectors that contain only a single LysM, including Mg1LysM and RiSLM, is due to chitin-induced polymerization, leading to contiguous LysM effector filaments that are anchored to chitin in the fungal cell wall to protect these cell walls (Sánchez-Vallet et al., 2020). Here, we show that Mgx1LysM similarly undergoes chitin-induced polymer formation ( Figure 6).
It was previously reported that Mg1LysM was incapable of suppressing chitin-induced immune responses (Marshall et al., 2011), in contrast to the immune-suppressive activity of Mg3LysM. A mechanistic explanation for this observation was found in the observation that Ecp6, being a close homolog of Mg3LysM, was able to efficiently sequester chitin oligomers from host receptors through intramolecular LysM dimerization, leading to a binding groove with ultrahigh F I G U R E 6 Mgx1LysM undergoes chitin-induced polymerization. (a) Amino acid sequence alignment of Mgx1LysM and Mg1LysM. The LysM is indicated with black underlining. (b) I-TASSER softwarebased in silico prediction of the threedimensional structure of Mgx1LysM (left) based on the recently generated crystal structure of Mg1LysM (right) (Sánchez-Vallet et al., 2020). The N-terminal 15 amino acids of both proteins are depicted in orange. Structures are visualized using the PyMOL molecular graphics system (Schrodinger LLC, 2015). (c) The LysM effector Mgx1LysM, together with RiSLM and Mg1LysM as positive controls, and Ecp6 as negative control, were incubated with chitohexaose (chitin) or water. After overnight incubation, methylene blue was added and protein solutions were centrifuged, resulting in protein pellets (red arrowheads) as a consequence of polymerization for Mgx1LysM, Mg1LysM, and RiSLM, but not for Ecp6 chitin-binding affinity. As a single LysM-containing effector protein, Mg1LysM lacks the ability to undergo intramolecular LysM dimerization, and thus to form an ultrahigh affinity groove for chitin binding, which could explain the inability to suppress immune responses by outcompetition of host receptor molecules for chitin binding. However, this mechanistic explanation was recently challenged by data showing that the R. irregularis RiSLM is able to suppress chitin-triggered immunity as well (Zeng et al., 2020). In the present study we show not only that Mgx1LysM can suppress chitin-triggered immunity, but also that Mg1LysM possesses this activity (Figure 4). However, it needs to be acknowledged that, whereas we used P. pastoris-produced protein in our initial analyses (Marshall et al., 2011), we used E. coli-produced protein in the current study. More recent insights after the publication of our initial study have revealed that LysM effector proteins may bind chitin fragments that are released from the P. pastoris cell walls during protein production, which may compromise the activity of the protein preparation in subsequent assays (Kombrink et al., 2017;Sánchez-Vallet et al., 2013. As the E. coli cell wall is devoid of chitin, partially or fully inactive protein preparations due to occupation of the substrate binding site are unlikely to occur. However, because Mg1LysM, Mgx1LysM, and RiSLM are able to suppress chitin-triggered immunity, a mechanistic explanation needs to be provided for the suppressive activity that does not involve substrate sequestration purely based on chitinbinding affinity. Possibly, these LysM effectors are able to perturb the formation of active chitin receptor complexes by binding to receptor monomers in a similar fashion as has been proposed for LysM2 of Ecp6 (Sánchez-Vallet et al., 2013 to prevent the activation of chitintriggered immune responses. Alternatively, precipitation of polymeric complexes formed by LysM effectors and released chitin oligosaccharides may provide a mechanism to eliminate these oligosaccharides and prevent their interaction with host receptor molecules.

| Gene expression analysis
Total RNA was isolated using the RNeasy Plant Mini Kit (Qiagen).
For each sample, 2 µg of RNA was used for cDNA synthesis with M-MLV reverse transcriptase (Promega) and 1 µl of the obtained cDNA was used for qPCR with SYBR Green master mix (Bioline) on a C1000 Touch thermal cycler (Bio-Rad). Expression of Mgx1LysM was normalized to the Z. tritici housekeeping gene β-tubulin using primer pairs Mgx1LysM-F/Mgx1LysM-R and ZtβTUB-F1/R1, respectively (Table S1). Relative expression was calculated with the E −∆Ct method and the boxplot was made with RStudio using the package of ggplot2 (R Core Team, 2017; Wickham, 2016).

| Heterologous protein production in E. coli
Signal peptide prediction was performed using SignalP v. 5.0 (http:// www.cbs.dtu.dk/servi ces/Signa lP/). The coding region for the mature Mgx1LysM protein was amplified from Z. tritici IPO323 genomic cDNA using primers Mgx1LysM-cDNA-F/ R (Table S1) and cloned into the pETSUMO vector and transformed as pETSUMO-Mgx1LysM into E. coli Origami for heterologous protein production as a fusion protein with a 6 × His-SUMO affinity-tag. Mgx1LysM expression was induced with 0.2 mM isopropyl βd-1-thiogalactopyranoside (IPTG) at 28 °C overnight. Next, E. coli cells were harvested by centrifugation at 3,800 × g for 1 hr and resuspended in 20 ml of cell lysis buffer (50 mM Tris-HCl pH 8.5, 150 mM NaCl, 2 ml glycerol, 120 mg lysozyme, 40 mg deoxycholic acid, 1.25 mg DNase I and 1 protease inhibitor pill) and incubated at 4 °C for 2 hr with stirring, and centrifuged at 20,000 × g for 1 hr. The resulting cleared supernatant was immediately placed on ice and subjected to further purification.

| Hyphal protection against chitinase hydrolysis
T. viride conidiospores were harvested from 5-day-old potato dextrose agar (PDA; Oxoid), washed with sterile water, and adjusted to a concentration of 10 6 spores/ml with potato dextrose broth (PDB; Becton Dickinson). Conidiospore suspensions were dispensed into a 96-well microtitre plate in aliquots of 50 µl and incubated at room temperature overnight. Effector proteins were added to a final concentration of 10 µM, and after 2 hr of incubation 3 µl of chitinase from Clostridium thermocellum (Creative Enzymes) or 10 µl of crude extract of tomato chitinases was added into the appropriate wells. As control, sterile water was added. All treatments were further incubated for 4 hr and hyphal growth was inspected with a Nikon H600L microscope.

| Reactive oxygen species measurement
Reactive oxygen species (ROS) production measurements were performed using three N. benthamiana leaf discs (Ø = 0.5 cm) per treatment, which were collected from 2-week-old N. benthamiana plants, placed into a 96-well microtitre plate, and rinsed with 200 µl of demineralized water. After 24 hr the water was replaced by 50 µl of fresh demineralized water and the plate was incubated for another 1 hr at room temperature. Meanwhile, mixtures of (GlcNAc) 6 (IsoSep AB) and effector proteins were incubated for 2 hr. In total, 20 µl of (GlcNAc) 6 was added in a final concentration of 10 µM to trigger ROS production in the absence or presence of 100 µl of effector protein in a final concentration of 50 µM in a measuring solution containing 100 µM/ L012 substrate (Fujifilm) and 40 µg/ml horseradish peroxidase (Sigma-Aldrich). Chemiluminescence measurements were taken every minute over 30 min in a CLARIOstar microplate reader (BMG LABTECH).

| Agrobacterium tumefaciens-mediated Z. tritici transformation
To generate Mgx1LysM deletion mutants, approximately 1.0 kb upstream and 1.2 kb downstream fragments of Mgx1LysM were amplified from genomic DNA of Z. tritici IPO323 using primer pairs Mgx1LysM-userL-F/R and Mgx1LysM-userR-F/R (Table S1) and the amplicons were cloned into vector pRF-NU2 as previously described (Frandsen et al., 2008). The resulting deletion construct was transformed into Z. tritici mutant ∆ku70 and the previously generated ∆Mg1LysM, ∆Mg3LysM, and ∆Mg1-∆Mg3 to generate double-and triple-gene deletion mutants. In short, minimal medium (MM) and induction medium (IM) were prepared at a pH of 7.0 and Z. tritici conidiospores were collected, washed, and adjusted to a final concentration of 10 7 spores/ml. Transformation plates were incubated at 16 °C in the dark for 2-3 weeks. Putative transformants were transferred to PDA plates supplemented with 200 µg/ml cefotaxime and 25 µg/ml nourseothricin (Sigma-Aldrich) and absence of Mgx1LysM was confirmed with PCR using the gene-specific primers Mgx1LysM-F/Mgx1LysM-R and the primers NAT-F/R (Table S1).

| Gene copy number determination
The copy number of the NAT resistance marker gene was determined with qPCR using primers NAT-F/R and ZtβTUB-F2/R2 (Table S1). The primer efficiency was determined using a series of 10 × dilutions of the genomic DNAs extracted from the triple-gene deletion strain ∆Mg1-∆Mgx1-∆Mg3 (392 ng/µl) and the wild-type strain IPO323 (600 ng/µl). qPCR assays were performed with an annealing temperature of 66 °C at which the calculated efficiencies of both primer pairs approached 100%. The C t value of NAT was normalized to the single-copy gene β-tubulin and calculated with the E −∆Ct method.

| Z. tritici inoculations on wheat
For all inoculation assays, the wheat cultivar Riband was used. Z. tritici wild-type strain IPO323 and the mutants were grown either on yeast extract peptone dextrose (YPD; 10 g of yeast extract/L, 20 g of peptone/L, 20 g of dextrose, and 15 g of agar/L) or in yeast glucose medium (YGM; 10 g of yeast extract/L, 30 g of glucose/L) supplemented with appropriate antibiotics at 16 °C with orbital shaking (100 rpm) for at least 5 days to obtain yeast-like conidiospores that were used for plant inoculation.
To this end, conidiospores were collected by centrifuging the suspensions at 2,000 × g for 5 min and adjusting to a final concentration of 10 7 spores/ml with 0.5% Tween 20 for inoculation by brushing on adaxial and abaxial sides of primary leaves of 11-day-old wheat plants. The inoculated plants were covered in a plastic tent for 2 days to secure high humidity, after which the tent was opened in one side.
Fungal biomass was measured with qPCR using a C1000 Touch thermal cycler (Bio-Rad) with the Z. tritici-specific β-tubulin primers ZtβTUB-F1/R1 in combination with primers TaCDC-F/R that target the constitutively expressed cell division control gene of wheat (Table S1). Relative fungal biomass was calculated with the E −∆Ct method and boxplots were made with RStudio using the package of ggplot2 (R Core Team, 2017; Wickham, 2016).

| Protein structure prediction and polymerization assay
The three-dimensional structure of Mgx1LysM was predicted with I-TASSER server (Roy et al., 2010;Yang & Zhang, 2015).

CO N FLI C T O F I NTE R E S T
The authors declare no conflict of interest exists.