HEATR5B associates with dynein‐dynactin and promotes motility of AP1‐bound endosomal membranes

Abstract The microtubule motor dynein mediates polarised trafficking of a wide variety of organelles, vesicles and macromolecules. These functions are dependent on the dynactin complex, which helps recruit cargoes to dynein's tail and activates motor movement. How the dynein‐dynactin complex orchestrates trafficking of diverse cargoes is unclear. Here, we identify HEATR5B, an interactor of the adaptor protein‐1 (AP1) clathrin adaptor complex, as a novel player in dynein‐dynactin function. HEATR5B was recovered in a biochemical screen for proteins whose association with the dynein tail is augmented by dynactin. We show that HEATR5B binds directly to the dynein tail and dynactin and stimulates motility of AP1‐associated endosomal membranes in human cells. We also demonstrate that the Drosophila HEATR5B homologue is an essential gene that selectively promotes dynein‐based transport of AP1‐bound membranes to the Golgi apparatus. As HEATR5B lacks the coiled‐coil architecture typical of dynein adaptors, our data point to a non‐canonical process orchestrating motor function on a specific cargo. We additionally show that HEATR5B promotes association of AP1 with endosomal membranes independently of dynein. Thus, HEATR5B co‐ordinates multiple events in AP1‐based trafficking.


Introduction
Microtubule motors play a central role in the trafficking of cellular constituents through the cytoplasm.Whilst multiple kinesin family members are tasked with transporting cargoes towards microtubule plus ends, a single motor-cytoplasmic dynein-1 (dynein)-is responsible for almost all minus end-directed movement (Reck-Peterson et al, 2018).Dynein's diverse cellular cargoes include mRNAs, protein complexes, nuclei, mitochondria, lysosomes, the Golgi apparatus and multiple classes of vesicle.It is unclear how one motor orchestrates trafficking of so many cargoes.
Dynein is a highly conserved, 1.3-MDa complex of six subunits, which are each present in two copies (Schmidt & Carter, 2016;Reck-Peterson et al, 2018).The heavy chain subunit contains a motor domain and a tail domain (Fig 1A).The motor domain has force-generating ATPase activity and a microtubule-binding site, which work in concert to drive movement along the track.The tail domain mediates homodimerisation and recruits the other dynein subunits, which make important contributions to complex stability and cargo binding (Schroeder et al, 2014;Lee et al, 2018;Reck-Peterson et al, 2018).
In vitro studies have shown that mammalian dynein needs additional factors for processive movement on microtubules (Miura et al, 2010;Trokter et al, 2012;McKenney et al, 2014;Schlager et al, 2014).The paradigmatic activation mechanism uses a combination of the 1.1-MDa dynactin complex and one of a number of coiled coil-containing proteins-so-called "activating adaptors" (Reck-Peterson et al, 2018;Olenick & Holzbaur, 2019)-that interact with cargo-associated proteins.The activating adaptor stimulates the interaction of dynein's tail with dynactin, which re-positions the motor domains for processive movement (Splinter et al, 2012; McKenney et al, 2014; Schlager et al, 2014;Zhang et al, 2017).Dynactin is also important for cargo recruitment to dynein as it stabilises the association of the motor with activating adaptors (Splinter et al, 2012;McKenney et al, 2014;Schlager et al, 2014).
The activating adaptors and cargo-associated proteins that connect different cargoes to dynein's tail and dynactin have been defined in only a small number of cases (Hoogenraad & Akhmanova, 2016;Reck-Peterson et al, 2018;Olenick & Holzbaur, 2019).Thus, for many cargoes, the proteins that provide the bridge to the motor complex and activate motor movement are not known.Identifying such factors is a prerequisite for understanding principles of cargo recognition and motor activation, as well as for dissecting the cellular functions of specific dynein-based transport processes.
We set out to address this issue by identifying novel biochemical interactors of the dynein tail, including those whose binding is enhanced by dynactin.Functional analysis of one dynactinstimulated interactor, the non-coiled-coil protein HEATR5B, shows that it binds directly to the dynein tail and dynactin and has an evolutionarily conserved function in promoting motility of adaptor protein-1 (AP1)-associated endosomal membranes.This work reveals a critical contribution of a protein that lacks coiled-coil architecture to dynein-based transport and provides novel insights into dynein functions during membrane trafficking.We also show that HEATR5B promotes association of AP1 with endosomal membranes independently of dynein.Thus, we have identified a factor that co-ordinates the recruitment of AP1 to endosomal membranes with microtubule-based transport of these structures.

A biochemical screen for dynein tail interactors
It was recently found that autoinhibitory interactions involving the dynein motor domain reduce association of the dynein tail with dynactin and cargo adaptors (Zhang et al, 2017;Htet et al, 2020).We therefore sought to increase the likelihood of identifying novel tail interactors by performing affinity purifications with a recombinant human dynein complex that lacks the motor domains (Fig 1B).This "tail complex" (comprising residues 1-1,079 of the DYNC1H1 heavy chain, the DYNC1I2 intermediate chain, the DYNC1LI2 light intermediate chain and the DYNLL1, DYNRB1 and DYNLT1 light chains) was produced in insect cells (Appendix Fig S1) and coupled to beads via epitope tags.The beads were then incubated with extracts from mouse brain, which provides a concentrated source of potential binding partners.Pull-downs were performed with both N-terminally and C-terminally tethered tail complexes to prevent loss of any interactions obstructed by coupling to beads in a specific orientation.In a subset of pull-downs, brain extracts were spiked with purified dynactin (Appendix Fig S1), which we reasoned would facilitate capture of tail interactors involved in cargo transport processes.Following mild washing of beads, retained proteins from three technical replicates per condition were analysed with label-free quantitative proteomics (Datasets EV1-EV4).
In the absence of exogenous dynactin, 57 proteins met our criteria for enrichment in the dynein tail pull-downs compared to controls in which only the epitope tags were coupled to the beads (log 2 [fold change] > 3.322, i.e. fold change > 10, and Welch's t-test q-value < 0.05; Fig 1C and D).Twenty-two of these proteins were core components of dynein or dynactin (Fig 1C and Ditalics).These factors included isoforms of dynein subunits that were not present in the recombinant human tail complex (Dync1i1, Dync1li1, Dynll2 and Dynlrb2), which were presumably recovered either because they exchange with their counterparts in the recombinant tail complex or are part of a second dynein complex that can be bridged by dynactin (Grotjahn et al, 2018;Urnavicius et al, 2018).The other 35 proteins specifically captured by the tail (Fig 1C and D bold; Appendix Table S1) included two known coiled-coil containing cargo adaptors for dynein-dynactin-BicD2 and Mapk8ip3 (also known as Jip3)-and the dynein regulator Ndel1 (Reck-Peterson et al, 2018).The other tail-enriched factors had not previously been shown to interact with dynein or dynactin.These proteins included ribosomal subunits, RNA binding proteins and other proteins with diverse biochemical functions (Appendix Table S1).
We next determined which proteins were captured on the dynein tail versus the epitope tag controls when exogenous dynactin was spiked into the extracts.In addition to dynein and dynactin components (Fig 1E and Fitalics), 28 proteins were enriched on the tail with dynactin spiking (Fig 1E and Fbold).Seventeen of these proteins were not captured by the tail in the absence of exogenous dynactin (Fig 1E and Fbold and blue; Appendix Table S2).These "dynactin-stimulated" interactors included Strip1 (Striatin-interacting protein 1), a component of the Stripak (Striatininteracting phosphatases and kinases) complex, and the Stripakassociated factor Cttnbp2 (Cortactin binding protein 2) (Kuck et al, 2019).Drosophila Stripak components associate with dynein and dynactin and regulate transport of endosomes, autophagosomes and dense-core vesicles (Sakuma et al, 2014;Neisch et al, 2017).Our data strengthen evidence that interactions of STRIPAK proteins with dynein-dynactin are conserved in mammals (Goudreault et al, 2009).The other dynactin-stimulated proteins had not been linked with dynein or dynactin in previous studies.
Collectively, our pull-down experiments identified ~50 novel interacting proteins of the dynein tail, several of which had their association enhanced by dynactin.
◀ Figure 1.Dynein architecture and identification of novel dynein tail interactors.

A
Overview of dynein complex.IC, intermediate chain; LCs, light chains; LIC, light intermediate chain; IC, intermediate chain.

B
Biochemical strategy for identifying dynein tail interactors, including those whose association is stimulated by dynactin.ZZ is a protein A-based tag.C-F Volcano plots showing results of label-free quantitative proteomics (iBAQ, intensity based absolute quantification; from three technical replicates per condition).
Proteins that met our criteria for enrichment on the dynein tail versus the control (median log 2 [fold change] > 3.322 and Welch's t-test q-value < 0.05) are labelled in colour and named.For clarity, the names of significant hits that cluster closely together on the plot (yellow circles) are given separately.Core dynein-dynactin components that were enriched on the dynein tail are shown in italics, with other enriched proteins shown in bold; of these "none core" proteins, those only detected in the presence of exogenous dynactin are shown in bold and blue.

Vanesa Madan et al
The EMBO Journal

HEATR5B associates with the dynein tail and dynactin
From our list of candidate tail interactors, we were particularly drawn to Heatr5B (Heat repeat containing protein 5B; also known as p200a; Hirst et al, 2005) because this protein was the only factor whose recruitment to both the N-terminally and C-terminally tethered dynein tail complexes was stimulated by exogenous dynactin (boxed labels in Fig 1E and F).Moreover, a previous proteomic study found that Heatr5B is present on dynactin-associated membranes isolated from mouse brain (Hinckelmann et al, 2016).Heatr5B (HEATR5B in humans) is a 225 kDa protein that lacks a coiled-coil domain and is predicted to mostly comprise HEAT repeats (Yoshimura & Hirano, 2016; https://www.uniprot.org/uniprot/Q9P2D3).Humans also have a related protein, HEATR5A (p200b), which was not recovered in our screen for tail interactors.A complex of HEATR5B, Aftiphilin (AFTPH/AFTIN) and c-synergin (SYNRG/AP1GBP1) interacts with the AP1 complex and the Golgi-localised, gamma adaptin ear-containing, ARF-binding (GGA) protein (Lui et al, 2003;Hirst et al, 2005), adaptors that orchestrate formation and cargo loading of a subset of clathrin-coated vesicles from intracellular membranes (Nakayama & Wakatsuki, 2003;Nakatsu et al, 2014;Sanger et al, 2019).Neither AFTPH or SYNRG were found in our dynein tail pulldowns, suggesting they do not associate with the motor complex or interact less strongly with it than HEATR5B does.RNAi-mediated knockdowns have implicated HEATR5B in AP1-mediated cargo sorting in HeLa cells (Hirst et al, 2005), Drosophila imaginal discs (Le Bras et al, 2012) and C. elegans epidermal cells (Gillard et al, 2015).The importance of HEATR5B proteins is underscored by the recent finding that hypomorphic mutations in the human gene are associated with the neurodevelopmental syndrome pontocerebellar hypoplasia (Ghosh et al, 2021).However, the molecular function of HEATR5B is not clear in any of these systems.
We first asked if HEATR5B is part of a complex with dynein and dynactin in human cells by performing immunoprecipitations from HEK293 cell lines that stably express either GFP-tagged HEATR5B or GFP alone.As expected, association of AFTPH, SYNRG and the AP1c subunit was detected with GFP-HEATR5B but not the GFP control (Fig 2A).Dynein and dynactin components were also specifically precipitated with GFP-HEATR5B (Fig 2A ), corroborating the results of our tail pull-down experiments.To determine if HEATR5B can interact directly with dynein or dynactin, we performed in vitro pull-downs with purified proteins.Whilst truncated versions of HEATR5B were unstable and could not be purified, we could produce a full-length GFP-tagged version of the protein in insect cells (Appendix Fig S1).We detected binding of the recombinant dynein tail complex to recombinant GFP-HEATR5B but not GFP alone (Fig 2B).Purified dynactin also interacted specifically with recombinant .Our previous finding that association of HEATR5B with the dynein tail in brain extracts is stimulated by dynactin (Fig 1E and F) suggests that HEATR5B can interact simultaneously with both complexes.Compatible with this notion, we did not observe competition between the purified dynein tail and dynactin for HEATR5B binding in our in vitro binding assay when both complexes were added simultaneously to the beads (Fig 2B).However, we cannot rule out the possibility that a competitive interaction was masked by binding sites on one of the components not being saturated.Nonetheless, we can conclude from this set of experiments that HEATR5B complexes with endogenous dynactin and dynein in cell extracts and can interact with both complexes directly.

HEATR5B is co-transported with AP1-positive endosomal membranes
We next investigated the possibility that HEATR5B is part of a link between AP1-positive membranes and dynein-dynactin.We first asked if HEATR5B co-localises with AP1.Although antibodies to HEATR5B work in immunoblots, they are not suitable for immunostaining of cells.We therefore stained HeLa cells that have a stable integration of the GFP-HEATR5B construct with an antibody to the c subunit of the adaptor complex (AP1c).GFP-HEATR5B was enriched in small puncta in the cytoplasm, ~30% of which co-localised with AP1c puncta (Fig 3A and B).In contrast, the population of AP1c that associated with the perinuclear trans-Golgi network (TGN, marked with TGN46 antibodies) rarely overlapped with GFP-HEATR5B (Figs 3A and EV1A and B).GFP-HEATR5B puncta also seldomly associated with EEA1-positive early endosomes or LAMP1-positive lysosomal membranes (Figs 3B and EV1B).These results reveal that HEATR5B is selectively enriched on AP1-positive structures in the cytoplasm.
We then tested if the cytoplasmic structures containing HEATR5B and AP1 are motile by live imaging of GFP-HEATR5B HeLa cells transfected with a plasmid coding for an RFP-tagged r1 subunit of AP1.As expected from our immunostaining results, HEATR5B and AP1r1 were frequently enriched together on punctate structures in the cytoplasm (Fig 3C;Appendix Fig S2A;Movie EV1).During several minutes of filming, the vast majority of the dual-labelled punctate structures exhibited short, oscillatory movements (Movie EV1).This behaviour is reminiscent of the behaviour of early endosomal cargoes for microtubule motors in HeLa cells, which can take tens of minutes to traverse the cytoplasm (Flores-Rodriguez et al, 2011;Zajac et al, 2013;preprint: Tirumala et al, 2022).However, a small fraction of AP1r1 puncta exhibited unidirectional movements of between 1.5 and 10 lm both towards and away from the perinuclear region with a mean instantaneous velocity of 260 AE 4 nm/s (AE SEM; 22 particles) (Fig 3D; Movie EV2).Thus, AP1-associated membranes can be subjected to long-range transport.
AP1 is implicated in the anterograde movement of cargoes from the TGN to recycling endosomes, as well as a reverse process that retrieves unbound receptors and SNAREs back to the TGN in order to sustain anterograde trafficking (Cancino et al, 2007;Robinson et al, 2010;Hirst et al, 2012).To confirm that motile HEATR5Bpositive structures in the cytoplasm are associated with recycling endosomal membranes, we transfected GFP-HEATR5B HeLa cells with a DsRed-tagged version of the recycling endosome marker RAB11A.HEATR5B and RAB11A signals frequently overlapped in the cytoplasm (Fig 3E;Appendix Fig S2B).As was the case with AP1r1 and GFP-HEATR5B, most of the structures positive for RAB11A and GFP-HEATR5B exhibited oscillatory motion, with only a small fraction undergoing long-distance transport (Fig 3F The above observations indicate that HEATR5B can associate with AP1-bound endosomal membranes that are capable of directed movement.To determine if dynein contributes to trafficking of these structures, we examined the distribution of AP1c in cells treated with an siRNA pool that depletes DYNC1H1 (Appendix Fig S2C).As microtubule minus ends are enriched at the perinuclear microtubule-organising centre (Brinkley, 1985), a role of dynein in AP1 transport should be reflected in more peripheral AP1c localisation when the motor complex is inhibited.This is indeed what we saw, with AP1c-associated structures more dispersed in the DYNC1H1 siRNA conditions than in controls treated with a nontargeting control siRNA pool (Fig 3G and H).The dispersed AP1cassociated structures included TGN material (as judged by strong TGN46 staining), which was previously shown to depend on dynein for perinuclear clustering (Burkhardt et al, 1997).However, AP1c puncta that were positive for RAB11A but lacked robust TGN46 signals, and thus corresponded to the free recycling endosome compartment (Fujii et al, 2020a), were also localised more peripherally when DYNC1H1 was depleted (Fig 3G).Based on these data, we conclude that dynein promotes retrograde trafficking of AP1associated endosomal membranes.

HEATR5B promotes membrane localisation and motility of AP1
We next sought to determine if HEATR5B contributes to trafficking of AP1-associated membranes.To this end, we used CRISPR/Cas9mediated mutagenesis to generate clonal human U2OS cell lines with frameshift mutations in the HEATR5B gene that disrupt protein expression (Appendix Fig S3A and B;Appendix Table S3).
We first used immunostaining to examine the effect of disrupting HEATR5B on the distribution of AP1 in fixed cells.Compared to parental, wild-type cells, HEATR5B mutant cells had a striking reduction in the number of AP1c puncta in the cytoplasm, as well as lower intensity of the puncta that were present (Fig 4A -C).This phenotype was seen in three independent HEATR5B mutant U2OS clones and was fully rescued by transfection of a GFP-HEATR5B construct (Appendix Fig S4;Fig EV2A), confirming the causal nature of the HEATR5B mutation.To better understand the nature of the phenotype, we visualised RAB11A together with AP1c in control and mutant cells (Fig 4A).As expected, in the control cells punctate signals of both proteins frequently overlapped with each other within the cytoplasm.RAB11A and AP1c signals did not, however, co-localise precisely, in keeping with a report that AP1 is present on tubular endosomes that have different constituents spatially segregated (Klumperman & Raposo, 2014).In HEATR5B mutant cells, RAB11A-positive structures were still abundant.However, there was a strong reduction in the intensity of AP1c signal associated with them.These data indicate that disrupting HEATR5B reduces the association of AP1c with endosomal membranes.We also observed modestly reduced association of AP1c with the TGN in the HEATR5B mutant cells, which was rescued by transfection of the GFP-HEATR5B construct (Fig EV2A and B).Consistent with reduced AP1 interaction with the recycling compartment, disruption of HEATR5B caused excessive tubulation of Transferrin receptorpositive membranes that were associated with the TGN (Fig EV3A and B).The decreased interaction of AP1c with endosomal membranes and the TGN in mutant U2OS cells is consistent with the reduction in punctate AP1 signal observed when the HEATR5B orthologue was knocked down with RNAi in C. elegans (Gillard  A, B Immunoblots showing results of (A) immunoprecipitation experiments from GFP-HEATR5B and GFP HEK293 cells and (B) in vitro pull-downs with recombinant, bead-associated GFP-tagged human HEATR5B or GFP protein incubated with purified dynein tail and/or dynactin complexes.G-HR5B, GFP-HEATR5B; G, GFP; IP, immunoprecipitate; IB, protein probed by immunoblotting; MW, molecular weight of protein standards (theoretical MW is shown for DYNC1H1 as standards of a similar molecular weight were not available); DT, dynein tail complex; DCTN, dynactin complex.In (A), GAPDH is a negative control.
Source data are available online for this figure.

of 23
The .We therefore conclude that HEATR5B promotes recruitment of AP1 to endosomal membranes and, to a lesser extent, the TGN.Our previous observation that bright AP1c puncta are abundant in cells treated with DYNC1H1 siRNA (Fig 3G) revealed that HEATR5B does not co-operate with dynein to promote AP1 membrane localisation.However, a small but significant dispersion of total AP1c signal towards the periphery of HEATR5B mutant U2OS cells (Fig 4E) was consistent with HEATR5B having an additional function in dynein-based motility of AP1-bound membranes.To directly assess the contribution of HEATR5B to motility of AP1, we performed high-speed imaging of AP1r1-RFP in live wild-type and mutant U2OS cells (Movie EV5).As expected from our fixed cell analysis, AP1r1 puncta were dimmer in the HEATR5B deficient cells than in controls (Fig EV3C).In both genotypes, the low intensity of AP1r1-RFP puncta meant that many of these structures could only be followed for a few seconds before the signals bleached.Nonetheless, mean square displacement (MSD) analysis over this timescale revealed that the motility of AP1r1 puncta in the cytoplasm of mutant cells was much less persistent than in controls (Fig 4F).The impaired transport of AP1-positive structures when HEATR5B was disrupted was not an indirect effect of reduced AP1 association with membranes, as the motility defect was still evident for AP1r1 puncta that had equivalent intensities in control and HEATR5B mutant cells (Fig EV3C).Staining of HEATR5B deficient cells with an antibody to a-Tubulin indicated that altered AP1r1 motility was also not due to impaired integrity of the microtubule network (Fig EV3D).Collectively, these data indicate that HEATR5B directly promotes motility of AP1-positive structures in U2OS cells.
We next asked if HEATR5B is sufficient to redistribute AP1associated membranes by strongly expressing GFP-HEATR5B in U2OS cells via transfection.Compared to control cells in which only GFP was expressed, GFP-HEATR5B expressing cells had increased perinuclear clustering of RAB11A-associated membranes that were also positive for AP1c and the DCTN1 subunit of the dynactin complex (Fig 4G -I), and were in the vicinity of the TGN (Appendix Fig S5).These observations suggest that HEATR5B stimulates retrograde trafficking of AP1-associated endosomal membranes by dynein-dynactin.
The Drosophila HEATR5B homologue is an essential gene Our experiments in human tissue culture cells revealed that HEATR5B promotes recruitment of AP1 to endosomal membranes, as well as the motility of these structures.To assess the importance of HEATR5B function at the organismal level, as well as in polarised cell types, we generated a strain of the fruit fly Drosophila melanogaster with an early frameshift mutation in the single HEATR5B homologue (CG2747, hereafter called Heatr5) (Appendix Fig S6A).This was achieved by combining a Cas9 transgene that is active in the female germline (nos-cas9) with a transgene expressing two gRNAs that target Heatr5 (gRNA-Hr5 To examine the maternal requirement for Heatr5, we followed the development of the embryos laid by nos-cas9 gRNA-Hr5 1+2 mothers.The vast majority of embryos did not hatch into larvae (Fig 5B ), instead arresting during late embryogenesis.These embryos, which presumably had biallelic disruption of Heatr5 in the female germline, typically had denticle hairs that were either absent or short and thin (Fig 5C;Appendix Fig S6C).This phenotype is reminiscent of that of mutants for Syntaxin-1A, which promotes apical protein secretion (Schulze & Bellen, 1996;Moussian et al, 2007).Taken together, these results demonstrate that Heatr5 has essential zygotic and maternal functions in Drosophila.

Heatr5 strongly promotes dynein-based transport of AP1-positive structures in the fly embryo
We next set out to understand the effect of disrupting Heatr5 on AP1-based trafficking in Drosophila.For these experiments, we used the syncytial blastoderm embryo as a model.This system is attractive because the microtubule cytoskeleton is highly polarised with minus ends nucleated apically above the nuclei and plus ends extended basally (Karr & Alberts, 1986;Warn & Warn, 1986).This means that the activity of dynein and kinesin motors can be distinguished by the direction of cargo movement (Shubeita et al, 2008).Moreover, membranes can be readily visualised by microinjection of antibodies coupled to bright fluorophores into the shared cytoplasm of the syncytium (Sisson et al, 2000;Papoulas et al, 2005).
We first analysed the effect of Heatr5 depletion on AP1 distribution in blastoderm embryos by immunostaining embryos laid by control and nos-cas9 gRNA-Hr5 1+2 mothers with antibodies to AP1c.Bright AP1c puncta were abundant in the cytoplasm of control embryos, particularly in the region basal to the nuclei (Fig 5C).In contrast, embryos of nos-cas9 gRNA-Hr5 1+2 females had AP1c puncta that were much fewer in number and much dimmer (Fig 5C and D), reminiscent of the situation in HEATR5B deficient human cells.This phenotype was confirmed with an independent pair of Heatr5 gRNAs (Appendix Fig S7A and B), as was the failure of mutant embryos to develop to larval stages (Appendix Fig S7C).As in HEATR5B deficient human cells, the change in AP1c distribution in nos-cas9 gRNA-Hr5 embryos was not due to altered total amounts of AP1c protein (Appendix Fig S7D).These observations reveal a conserved role of HEATR5B proteins in localising AP1 to membranes.
We next examined motility of AP1-positive structures in live embryos.This was achieved by labelling the AP1c antibodies with Alexa555-coupled secondary antibodies, injecting the conjugates into the embryo at the junction of the yolk and basal cytoplasm (Appendix Fig S8A), and filming the peripheral region of the embryo for several minutes.Following injection of the antibody conjugates into control embryos, fluorescent puncta formed that underwent rapid, bidirectional transport in the cytoplasm.These movements had a strong net apical bias, often pausing or arresting just beneath the peripheral blastoderm nuclei ( We next injected the fluorescent AP1c antibody conjugates into nos-cas9 gRNA-Hr5 1+2 embryos.As expected, the AP1c puncta in these embryos were considerably dimmer than those observed in the control.Nonetheless, the antibody labelling method meant they were bright enough to be followed throughout the period of filming.In the mutant embryos, the rate of net apical movement of AP1c puncta was strongly impaired.The puncta mostly exhibited shortrange saltatory movements or pausing behaviour (Appendix Fig S8B; Movie EV6), and consequently rarely reaching the region beneath the blastoderm nuclei during the period of image acquisition (Fig 6A).A defect in the rate of net apical transport in mutant embryos was confirmed by automated tracking of particle movement, which additionally revealed significant reductions in the apical velocity and run length of AP1c signal compared to the control (Fig 6B ), as well as more modest decreases in the basal velocity and run length (Fig EV4A).These observations show that AP1 undergoes net apical transport in the Drosophila embryo and that this process is strongly promoted by Heatr5.
As actin structures are concentrated above the nuclei at blastoderm stages (Karr & Alberts, 1986), it is likely that microtubules are the tracks for long-distance transport of AP1 in the basal cytoplasm.Supporting this notion, AP1c transport in wild-type embryos was arrested by microinjection of the microtubule targeting agent colcemid and rapidly reinitiated when the drug was inactivated with a pulse of UV light (Czaban & Forer, 1985; Movie EV7).The localisation of microtubule minus ends above the blastoderm nuclei strongly suggests that apical AP1 transport is driven by dynein and we confirmed this is the case by injecting wild-type embryos with a function-blocking antibody to Dynein intermediate chain (Dic) (Bullock et al, 2006) prior to injecting the AP1c antibody conjugate (Fig 6C; Movie EV8).Consistent with the interdependence of dynein and kinesin motors in several bidirectional transport systems (Jolly & Gelfand, 2011), the Dic antibody also impaired some features of plus-end-directed AP1c motility (Fig EV4B).Thus, the modest impairment of plus-end-directed motion of AP1c in Heatr5 mutant embryos could be an indirect effect of dynein inhibition.Together, these experiments demonstrate that Heatr5 promotes dyneindependent transport of AP1 along microtubules.
To test if Heatr5 has a general role in dynein-based transport in the embryo, we assessed mRNA trafficking by the motor in wildtype and nos-cas9 gRNA-Hr5 1+2 embryos via microinjection of Heatr5 is required for Golgi organisation in the Drosophila embryo Finally, we investigated if the AP1 membrane recruitment and trafficking defects in Heatr5-deficient embryos are accompanied by defects in Golgi morphology.We compared the distribution in control and Heatr5 mutant embryos of the Golgin-245, GM130 and Golgin-84 golgin proteins, which are enriched, respectively, in the trans-Golgi, cis-Golgi and rims of the Golgi stack (Kondylis & Rabouille, 2009;Munro, 2011).In contrast to the small Golgi stacks  Increased aggregation of Golgi stacks has previously been observed in Drosophila S2 cells treated with brefeldin A (Fujii et al, 2020b), which impairs AP1 association with membranes by targeting ARF1 function (Donaldson et al, 1992;Helms & Rothman, 1992).Conglomeration of golgin signals in Heatr5 mutant embryos may therefore reflect impaired release of material from the Golgi due to inefficient targeting of AP1 complexes to this organelle.Based on these observations, we propose that Heatr5-mediated transport of AP1 complexes to the Golgi stimulates post-Golgi trafficking in the embryo.We additionally discovered that a fraction of Golgin-245 was ectopically localised in the yolk in Heatr5 mutant embryos (Fig 7B;quantification in Fig EV5).This result raises the possibility that Heatr5 also contributes to transport of this protein from an internal pool to the cytoplasm.

Novel interactors of the dynein tail
In addition to known co-factors, our recombinant tail-based screening strategy revealed ~50 novel candidate interactors of the dynein complex in brain extracts.Several of these proteins had their association with the tail enhanced by dynactin.The novel dynein tail interactors may not have been found in previous dynein "interactomes" (Gershoni-Emek et al, 2016; Redwine et al, 2017) because these studies used full-length DYNC1H1, in which the presence of the motor domain can impair cargo association with the tail (Zhang et al, 2017;Htet et al, 2020), as well as different cell types or subcellular compartments as a source of potential interactors.Sequence analysis revealed that only ~20% of the total set of dyneininteracting proteins in our experiments contain a predicted coiledcoil domain (Appendix Tables S1 and S2), suggesting that many of them interact indirectly with the motor complex or bind directly through a mode distinct from that of canonical activating adaptors.Whilst we prioritised HEATR5B-one of the dynactin-stimulated interactors-for mechanistic analysis in this study, we anticipate that investigating other hits from our screen will shed further light on dynein's cargo linkage and regulation.Of particular note, we observed a large number of ribosomal proteins and other RNA-associated proteins in our dynein tail interactomes.These factors are candidates to participate in dynein-mediated trafficking of messenger ribonucleoprotein particles (mRNPs) (Mofatteh & Bullock, 2017).Other intriguing hits include the dynactin-stimulated tail interactor Wdr91, a Rab7 effector implicated in endosomal recycling and lysosomal function (Xing et al, 2021;Liu et al, 2022), as well as reovirus infection (Snyder et al, 2022).In addition to analysing the current set of dynein interactors, it may be possible in the future to adapt our pulldown approach to identify more transient interactors of the motor complex, for example by incorporating a biotin ligase on the dynein tail for proximity-dependent biotinylation (Samavarchi-Tehrani et al, 2020).

HEATR5B promotes AP1 membrane localisation and motility
HEATR5B was first identified in human cells through its association with AFTPH, which contains a motif that binds the AP1c "ear" domain (Lui et al, 2003;Hirst et al, 2005).It was shown that AFTPH and HEATR5B form a stable complex with SYNRG and that knocking down the function of this assembly causes partial rerouting of AP1 cargoes from the TGN to a more peripheral compartment (Hirst et al, 2005).RNAi-based knockdowns subsequently implicated HEATR5B orthologues in AP1-based trafficking of components of the Notch signalling pathway in Drosophila imaginal discs (Le Bras et al, 2012) and E-cadherin in C. elegans epidermal cells (Gillard et al, 2015).How HEATR5B mechanistically influences AP1 function in these systems was not, however, investigated.
It was previously shown that the budding yeast homologue of Heatr5B-Laa1-is required for membrane recruitment of AP1 (Fernandez & Payne, 2006;Zysnarski et al, 2019).We have shown that HEATR5B proteins also promote association of AP1 with membranes in human and Drosophila cells.Thus, HEATR5B has widespread roles in membrane targeting of AP1.In budding yeast, the ability of Laa1 to promote AP1 membrane association depends on another protein, Laa2 (Zysnarski et al, 2019).It is unclear how HEATR5B promotes AP1 membrane association in higher eukaryotes, as an overt orthologue of Laa2 is missing.However, our data indicate that this process is independent of HEATR5B's ability to bind dynein.We provide evidence that HEATR5B's interaction with the motor complex instead promotes microtubule-based trafficking of AP1-associated endosomal membranes.Thus, HEATR5B has a central role in controlling the function of AP1, co-ordinating its association with membranes and microtubule-based transport of these structures.
Work by several groups has demonstrated the importance of coiled-coil-containing activating adaptors in linking dynein to ◀ Figure 6.Heatr5 promotes dynein-based motility of AP1-positive structures in the blastoderm embryo.

A
Stills from representative image series of blastoderm embryos from control (nos-cas9) and nos-cas9 gRNA-Hr5 1+2 mothers injected at the junction of the yolk and basal cytoplasm with fluorescent AP1c antibody conjugates.Yellow arrowhead, basally concentrated puncta in mutant embryo; blue arrowhead, rare punctum that underwent long-range apical transport in mutant embryo (see Movie EV6).Scale bar, 10 lm.B-D Quantification of motility of AP1c (B, C) and injected bcd mRNA (D) in embryos of control and nos-cas9 gRNA-Hr5 1+2 mothers (B, D) or wild-type embryos preinjected with function-blocking Dic antibodies or control GFP antibodies (C)."% apical" is the percentage of the particle trajectory time that is classed as apical transport.Circles are mean values for individual injected embryos; columns and error bars represent means AE SD of these mean values; number of embryos analysed is shown above columns (at least 24 particles analysed per embryo); in (C), one a-Dic injected embryo was omitted from the apical run length analysis as it did not exhibit any runs long enough to meet the threshold for inclusion; statistical significance was evaluated with an unpaired two-tailed t-test: ****P < 0.0001; ***P < 0.001; *P < 0.05.
Source data are available online for this figure.
cargoes and dynactin, and thus initiating long-distance cargo transport (Reck-Peterson et al, 2018;Olenick & Holzbaur, 2019).Whilst our data demonstrate a role for HEATR5B proteins in promoting AP1 transport, including long-range dynein-based movements in the fly embryo, several observations suggest they are unlikely to act analogously to an activating adaptor as a primary link between AP1associated membranes and dynein.Firstly, HEATR5B proteins lack the coiled-coil domains that are typical of activating adaptors.
Secondly, our observation of residual dynein-based motility of AP1positive membranes in nos-cas9 gRNA-Hr5 Drosophila embryos shows the cargo can still be linked to the motor complex when HEATR5B is disrupted.And thirdly, in ongoing work, we have failed to detect in vitro activation of dynein-dynactin motility by purified HEATR5B.We therefore favour a scenario in which HEATR5B enhances the function of a dynein-dynactin-activating adaptor complex on AP1-associated membranes.The involvement of an as- of-yet unidentified activating adaptor may also explain why we observed stimulation of dynein's association with HEATR5B by dynactin in cellular extracts but not with purified proteins.HEATR5B consists almost entirely of repeats of HEAT domains, ~40 amino acid motifs of anti-parallel a-helices separated by a short linker (Andrade & Bork, 1995;Groves et al, 1999).The ability of HEAT repeat proteins to act as flexible scaffolds for protein-protein interactions (Grinthal et al, 2010;Yoshimura & Hirano, 2016) raises the possibility that HEATR5B promotes transport by stabilising a dynein-dynactin-activating adaptor assembly and/or its association with the membrane.Intriguingly, another non-coiled-coil protein involved in cargo transport by dynein-dynactin, Ankyrin-B (Lorenzo et al, 2014), also contains a large number of a-helical ankyrin repeats.It is tempting to speculate that the repeated units in Ankyrin-B and HEATR5B play an analagous role in scaffolding dynein-dynactin-activating adaptor-cargo complexes.
Future efforts will be directed at identifying additional proteins that link AP1 to dynein and dynactin and determining how HEATR5B affects the motility of the entire machinery when it is reconstituted in vitro.It will also be important to determine if and how HEATR5B puncta contributes to transport of other cargoes by dynein.Whilst our microinjection of mRNAs in mutant fly embryos show that HEATR5B is not a general regulator of dynein activity, the finding that a substantial fraction of HEATR5B puncta in human cells do not overlap with AP1 raises the possibility of involvement in transport of additional cargoes.

The role of HEATR5B and dynein in AP1-based membrane trafficking
Dynein plays a role in multiple trafficking events in the endocytic pathway, including transport of peripheral early endosomes, late endosomes and lysosomes, as well as sorting of internalised receptors through these compartments (Burkhardt et al, 1997;Jordens et al, 2001;Lalli et al, 2003;Driskell et al, 2007;Traer et al, 2007;Loubery et al, 2008;Hong et al, 2009;Horgan et al, 2010;Guo et al, 2016;Jongsma et al, 2023).The range of dynein functions makes it challenging to study specific trafficking processes by targeting the motor complex.Our analysis of HEATR5B highlights a novel dynein-based process for retrograde trafficking of AP1associated endosomal material to the Golgi apparatus (Robinson et al, 2010;Hirst et al, 2012).This process appears to be distinct from a previously identified dynein-and RAB11FIP3-dependent process for moving material between RAB11A-positive recycling endosomes and the TGN (Horgan et al, 2010;McKenney et al, 2014) because RAB11A and AP1 are not enriched on the same domain of tubular endosomal structures.We envisage the two dynein-based pathways acting in parallel to ensure efficient delivery of endosomal material to the TGN, or translocating distinct sets of proteins that are sorted into endosomal membrane domains enriched with AP1 or RAB11A.Our observation in human cells that HEATR5B co-localises with AP1-positive membranes in the cytoplasm but not at the TGN suggests a mechanism for limiting dynein activity on AP1 cargoes at the Golgi.This process presumably facilitates kinesin-driven cargo trafficking in the anterograde direction (Nakagawa et al, 2000;Schmidt et al, 2009), thus ensuring bidirectional trafficking.
In addition to trafficking cargoes, HEATR5B-mediated transport may promote delivery of the AP1 complex from endosomal membranes to the TGN, where it is needed for clathrin-mediated budding of post-Golgi membranes.In support of this notion, we observed long-range transport of AP1-associated membranes from the basal cytoplasm to Golgi stacks in the wild-type Drosophila embryo.Moreover, impairment of this process in Heatr5 mutant embryos was accompanied by reduced association of AP1 with the Golgi and a large increase in the size of the trans-Golgi compartment.Our observations of partially reduced AP1 localisation with the TGN and excessive tubulation of TGN-associated membranes in HEATR5B deficient human cells is consistent with dynein-mediated delivery of AP1 complexes contributing to post-Golgi trafficking in other systems.To what extent defects in this and other aspects of AP1 trafficking are involved in the neurodevelopmental syndrome associated with hypomorphic HEATR5B mutations (Ghosh et al, 2021) is another important question to address in the future.

Cell culture
Spodoptera frugiperda (fall armyworm) Sf9 insect cells (Oxford Expression Technologies Ltd) were cultured at 27°C in Insect-XPRESS protein-free insect medium with L-Glutamine (Lonza) in shaking suspension.HEK293 Flp-in cells (provided by A. Castello, MRC-University of Glasgow Centre for Virus Research, UK), HeLa Flp-In cells (Kaiser et al, 2008; provided by E. Dobrikova and M. Gromeier, Duke University Medical Center, USA), and unmodified U2OS cells and HeLa cells (both provided by H. McMahon, MRC-LMB, Cambridge, UK) were cultured at 37°C with 5% CO 2 in complete DMEM (high glucose DMEM + GlutaMax [Gibco], 10% foetal bovine serum [Gibco] and 1% Penicillin/Streptomycin solution [Gibco]).Flp-In cells were maintained in the presence of 100 lg/ml zeocin and 5 lg/ml blasticidin (both from Gibco).Cells were checked for the absence of Mycoplasma using the MycoAlert kit (Lonza) at the onset of the study.

Protein expression and purification
Human dynein tail complex Baculovirus encoding the human dynein tail complex was produced using published procedures (Schlager et al, 2014).Briefly, pACEBac1-His-ZZ-LTLTL-DYNC1H1E1074-GST and pIDC-LIC2-IC2C-Tctex1-Robl1-LC8 were recombined by Cre-mediated fusion and incorporated into the baculovirus genome by transformation into EMBacY bacterial cells.Sf9 cells (500 ml cell suspension at 2 × 10 6 cells/ml) were infected with baculovirus and cultured for a further 72 h before cell pelleting by centrifugation.Pellets were lysed by Dounce homogenisation in lysis buffer (25 mM Hepes pH 7.2, 100 mM NaCl, 10 mM imidazole, 10% Glycerol, 1 mM DTT, 0.1 mM ATP, 1× COMPLETE protease inhibitor (Roche) and 0.8 mM PMSF).The lysate was centrifuged for 45 min at 504,000 g in a Ti70 rotor and the supernatant loaded in a 5-ml HisTrap Ni-NTA column using an AKTA Purifier system (Cytiva).The column was washed with eight column volumes of 10% (v/v) elution buffer (lysis buffer containing 500 mM imidazole) and the protein complex eluted using a step gradient of elution buffer (from 10 to 40%).The relevant fractions were collected, pooled and filtered through a 0.22-lm filter before ion exchange purification on a MonoQ column (10 ml, 5/50 GL [Sigma]) that was pre-equilibrated in lysis buffer.After washing with 10 column volumes of 10% buffer B (lysis buffer including 1 M imidazole), the protein complex was eluted using a step gradient of buffer B (from 10 to 50%).Fractions were collected and analysed by SDS-PAGE, followed by pooling of fractions of interest, dispensing into aliquots, and flash freezing in N 2 for storage at À80°C.

GFP-HEATR5B
Sf9 cells (2-l cell suspension at 2 × 10 6 cells/ml) were infected with baculovirus incorporating the GFP-HEATR5B expression cassette and cultured for a further 72 h before cell pelleting by centrifugation.Cell pellets were lysed by resuspension and Dounce homogenisation (50 strokes) in lysis/washing buffer (LWB: 10 mM Tris-HCl pH 8.0, 150 mM NaCl, 0.5 mM EDTA, 1 mM DTT, 1× COMPLETE protease inhibitors and 2 mM PMSF).The lysate was centrifuged for 30 min at 92,600 g using a Ti70 rotor.The supernatant was collected and loaded in a 5 ml Strep-Trap HP column (Cytiva) that was pre-equilibrated with LWB.After washing with 20 column volumes of LWB, the protein was eluted with 10 column volumes of elution buffer (LWB including 3 mM desthiobiotin [Sigma]).Fractions containing GFP-HEATR5B were pooled and the protein solution (3 ml) injected in a HiLoad 16/60 Superdex 200 Prep grade column (Cytiva) pre-equilibrated with gel filtration buffer (10 mM Tris HCl pH 7.4, 150 mM NaCl and 0.5 mM TCEP).Fractions were collected and analysed by SDS-PAGE, followed by pooling of relevant fractions, concentrating using an Amicon Ultra 4 centrifugal filter unit (100 kDa MWCO [Merck]) to 1 mg/ml, dispensing into aliquots, and flash freezing in N 2 for storage at À80°C.

Dynactin
Dynactin was purified from pig brain as described previously (Schlager et al, 2014;Urnavicius et al, 2015) and analysed by SDS-PAGE.Aliquots of the complex were flash-frozen in N 2 for storage at À80°C.

Preparation of mouse brain extracts
Following dissection, brains from 16 C57BL/6j-OlaHsd male mice strain were transferred to bijou tubes containing solubilisation buffer (10 mM Hepes pH 7.3, 150 mM NaCl and 2 mM EDTA) on ice.Two brains were transferred to a pre-chilled 30-ml glass tube Wheaton homogenizer containing 5 ml of cold "solubilisation-plus" buffer (solubilisation buffer with 1× COMPLETE protease inhibitor and 1× PhosSTOP phosphatase inhibitor [Roche]).The brains were homogenised in a coldroom using an electric homogeniser with a Teflon arm (1,100-1,300 rpm and 10 strokes).An extra 1 ml of solubilisation-plus buffer was added to the tube, followed by addition of two more brains and further homogenisation (15 strokes) with the same speed.The lysate was then transferred to a prechilled 50-ml falcon tube and kept on ice.The same procedure was repeated three times, followed by pooling of lysates from the 16 brains, addition of Triton X-100 (0.1% [v/v] final concentration) and incubating on ice for 15 min.The lysate was then split into eight pre-chilled, thick-walled polycarbonate tubes (3.2 ml, Beckman Coulter) and centrifuged in an ultracentrifuge (Beckman Optima TLX) using a TLA110 pre-chilled rotor at 213,000 g for 20 min at 4°C.The supernatants were pooled in a 50-ml falcon tube on ice and then flash-frozen in N 2 in 500 ll aliquots.Protein concentration of the extracts was ~10 mg/ml.

Pull-downs of dynein tail-associated proteins from brain extracts
Pull-downs using glutathione beads Glutathione magnetic beads (Pierce) were washed twice with GST binding buffer (125 mM Tris-HCl pH 8.0, 150 mM NaCl, 0.05% Tween-20 and 1× COMPLETE protease inhibitor).100 pmol (77 nM) of recombinant dynein tail complex or GST (Glutathione-Stransferase) only were incubated with 100 ll glutathione magnetic beads in a total volume of 1,300 ll GST binding buffer.The beads were washed three times with 2 ml of GST binding buffer and incubated with 500 ll mouse brain extract (5 mg total protein) or 500 ll mouse brain extract spiked with 50 lg purified dynactin (41.67 pmol [48.45 nM]) in solubilisation-plus buffer for 2.5 h at 4°C with rotation.The beads were washed twice with 2 ml of Citomix buffer (60 mM KCl, 0.075 mM CaCl 2 , 5 mM K 2 HPO 4 / KH 2 PO 4 pH 7.6, 12.5 mM HEPES pH 7.6, 2.5 mM MgCl 2 , 0.1% [v/v] Triton X-100, 2 mM ATP, 1× COMPLETE protease inhibitor and 1× PhosSTOP phosphatase inhibitor), twice with 50 mM ammonium bicarbonate pH 8.0, and resuspended in 100 ll of 50 mM ammonium bicarbonate pH 8.0.A 10-ll aliquot from each sample was saved for downstream quality control with immunoblotting by adding 10 ll 4× LDS buffer (Invitrogen) containing 200 mM DTT and incubating at 98°C for 15 min.The beads in these samples were magnetically separated for 10 min and the supernatant transferred to a fresh 1.5-ml tube that was then frozen at À20°C.The remaining 90 ll of bead slurry for each sample was processed for liquid chromatography-tandem mass spectrometry (LC-MS/MS), as described below.
Pull-downs using IgG beads IgG magnetic beads (Dynabeads M-280 Sheep a-Rabbit IgG, Life Technologies) were washed twice with IgG binding buffer (1× PBS, 0.05% [v/v] Tween-20 and 1× COMPLETE protease inhibitor).100 pmol (77 nM) of recombinant dynein tail complex or recombinant protein A (ThermoFisher Scientific) were incubated with 100 ll IgG magnetic beads in 1,300 ll IgG binding buffer with rotation for 1 h at 4°C.The beads were washed three times in IgG binding buffer and incubated with 500 ll mouse brain extract (5 mg total protein) or 500 ll mouse brain extract spiked with 50 lg purified dynactin (41.67 pmol [48.45 nM]) in solubilisation-plus buffer for 2.5 h at 4°C with rotation.The samples were washed and prepared for immunoblot analysis and LC-MS/MS following the same procedure described above for glutathione beads.

LC-MS/MS
Proteins were digested on beads with 1 lg trypsin (Promega) for 18 h at 37°C, followed by acidification of peptides with 2% (v/v) formic acid.The bead/peptide mix was then centrifuged at 14,000 × g for 5 min and the supernatant collected.The peptide fractions (7 ll each) were analysed by nano-scale capillary LC-MS/ MS with an Ultimate U3000 HPLC (ThermoScientific Dionex) with a 300 nl/min flow rate.Peptides were trapped in a C18 Acclaim PepMap 100 l-precolumn cartridge (5 lm, 300 lm × 5 mm [Ther-moScientific Dionex]) prior to separation on a C18 Acclaim PepMap 100 (3 lm, 75 lm × 250 mm [ThermoScientific Dionex]) and elution with a 90-min gradient of acetonitrile (from 5 to 40%).Using a modified nano-flow electrospray ionisation source, the analytical column outlet was directly interfaced with a hybrid linear quadrupole ion trap mass spectrometer (Orbitrap QExactive [ThermoScientific]).Data-dependent analysis was carried out with a resolution of 60,000 for the full MS spectrum (collected over a 200-1,800 m/z range), followed by 10 MS/MS spectra in the linear ion trap (collected using 35-threshold energy for collision-induced dissociation).

Mass-spectrometry data processing and analysis
Raw mass-spectrometry data from pull-down samples were processed with MaxQuant software (versions 1.5.6.2;Tyanova et al, 2016a) using the built-in Andromeda engine to search against the UniprotKB mouse proteome (Mus musculus; release 2012_02) containing forward and reverse sequences.The iBAQ algorithm and "Match Between Runs" option were additionally used.Carbamidomethylation was set as a fixed modification, and methionine oxidation and N-acetylation were set as variable modifications (using an initial mass tolerance of 6 ppm for the precursor ion and 0.5 Da for the fragment ions).For peptide and protein identifications, search results were filtered with a false discovery rate (FDR) of 0.01.Datasets were further processed with Perseus software (version 1.6.13.0;Tyanova et al, 2016b).Protein tables were filtered to eliminate identifications from the reverse database, as well as common contaminants.Only proteins identified on the basis of at least two peptides and a minimum of three quantification events in at least one experimental group were taken forward.iBAQ intensity values were normalised against the median intensity of each sample (using only those peptides that had intensity values recorded across all samples and biological replicates), followed by log 2 -transformation and filling of missing values by imputation with random numbers drawn from a normal distribution calculated for each sample, as previously described (Neufeldt et al, 2019;Plaszczyca et al, 2019).Proteins that were statistically significantly enriched between pairs of datasets were identified with Welch's t-tests with permutation-based false discovery rate statistics.Two-hundred-and-fifty permutations were performed with an FDR threshold set at 0.05.The parameter S0 was set at 0.1 in order to separate specifically enriched interactors from the background.Volcano plots of results were generated in Perseus.UniprotKB accession codes of all protein groups and proteins identified by mass spectrometry are provided in Datasets EV1-EV4.

Flp-In T-REx cell line generation
HEK293 or HeLa Flp-In cells in wells of 6-well plates (8.5 × 10 5 cells/well) were transfected with 1 lg plasmid DNA (pcDNA5 FRT/ TO GFP-linker or pcDNA5 FRT/TO GFP-HR5B with pOG44 in a 1:1 or 2:1 ratio, respectively).The DNA was mixed with 200 ll OptiMEM (Gibco) and 5 ll 1 mg/ml Polyethyleneimine (PEI) "MAX" MW 40,000 (Polysciences) in sterile phosphate-buffered saline (PBS).After vortexing, the mixture was incubated for 15 min at 20°C before adding to the cells in a drop-wise manner and gentle swirling of the plate.Cells were then incubated for 24 h at 37°C before removal of the media and splitting into a T25 flask containing 150 lg/ml hygromycin B and 5 lg/ml blasticidin (both from Gibco).The next day, and once every following week, the selective media was changed until single colonies appeared, which were detached with trypsin and pooled together for subsequent experimentation.

GFP-Trap immunoprecipitation from extracts
To induce expression of GFP or GFP-HR5B, HEK293 or HeLa Flp-In T-REx GFP-linker or GFP-HR5B cell lines cells were cultured in the presence of 1 lg/ml tetracycline for at least 48 h.Cells from three 15-cm dishes were harvested for each immunoprecipitation sample and lysed in 1.2 ml of ice-cold lysis buffer (10 mM Tris-HCl pH 7.4, 150 mM NaCl, 0.5 mM EDTA, 5% NP-40, 1 mM PMSF, 1× COM-PLETE protease inhibitors and 1× PhosSTOP phosphatase inhibitors) for 30 min by pipetting extensively every 10 min.Lysates were transferred to pre-chilled thick polycarbonate tubes and centrifuged at 39,000 g for 30 min in a TLA110 rotor using a Beckman Optima TLX ultracentrifuge.The supernatant was transferred to a pre-cooled 15-ml falcon tube, followed by addition of 1.5 volumes of ice-cold dilution buffer (10 mM Tris/HCl pH 7.4, 150 mM NaCl, 0.5 mM EDTA, 1× COMPLETE protease inhibitor and 1× PhosSTOP phosphatase inhibitor).The diluted supernatant was added to 60 ll of equilibrated GFP-Trapâ_MA bead slurry (Chromotek) and the samples tumbled end-over-end for 4 h at 4°C.Beads were washed in 1 ml Citomix buffer (with mixing by pipetting up and down four times), transferred to fresh tubes and denatured with LDS/DTT as described above for pull-downs from mouse brain extracts.
The EMBO Journal 42: e114473 | 2023 Ó 2023 The Authors The EMBO Journal Vanesa Madan et al

In vitro protein-protein interaction assay
For each sample, 25 ll of GFP-Trap â _MA bead slurry (Chromotek) was equilibriated with 1 ml of cold dilution buffer (DB: 10 mM Tris-HCl pH 7.4, 150 mM NaCl, 0.5 mM EDTA, 1× COMPLETE protease inhibitors and 1× PhosSTOP phosphatase inhibitors), followed by blocking of non-specific binding sites on the beads with 4% bovine serum albumen (BSA) in DB for 50 min at 4°C with endover-end tumbling.Beads were washed twice in DB and transferred to fresh 1.5-ml tubes.Following removal of the supernatant, 80 pmol of purified GFP or GFP-HR5B in 0.5 ml of DB containing 2% NP-40 and 0.4 mM PMSF was mixed with the beads by endover-end tumbling at 4°C for 2 h.Beads were washed three times in RIPA buffer (10 mM Tris-HCl pH 7.4, 150 mM NaCl, 0.5 mM EDTA, 0.1% SDS, 1% Triton X-100, 1× COMPLETE protease inhibitors and 1× PhosSTOP phosphatase inhibitors) and two times in protein binding buffer (PBB: 10 mM HEPES pH 7.6, 150 mM NaCl, 0.5 mM EDTA, 0.1% Triton X-100, 1% deoxycholate and 1× COMPLETE protease inhibitors), followed by transfer to fresh tubes and removal of the supernatant.Dynein tail (20 pmol), dynactin (10 pmol) or dynein tail with dynactin (20 and 10 pmol, respectively) were incubated with the beads in 0.5 ml PBB for 2 h at 4°C with end-over-end tumbling.Subsequently, beads were washed twice in 1 ml RIPA buffer (with mixing by pipetting up and down four times), transferred to a fresh tube and processed for immunoblotting as described above.One third of the sample was loaded per gel lane, alongside 0.1 lg of dynein tail or dynactin alone for molecular weight comparison.

Immunoblotting
Proteins were separated on 4-12% NuPAGE Bis-Tris gels (Thermo-Fisher Scientific), with ECL Rainbow Full Range Marker (Cytiva) used for molecular weight standards.Following transfer to methanol-activated PDVF membrane (Immobilon P, Millipore) using the XCell II blot system (ThermoFisher Scientific), membranes were blocked with 5% (w/v) milk powder (Marvel) in PBS, and incubated with primary antibodies in 1% milk powder or 1% BSA in PBS overnight at 4°C.After washing with PBS/0.5% Tween-20 or PBS/1% Tween-20, membranes were incubated with secondary antibodies in 1% milk powder or 1% BSA in PBS for 1 h at room temperature.Details of primary and antibodies are provided below.Signals were developed using the ECL Prime system (Cytiva) and Super RX-N medical X-ray film (FUJIFILM).When loading samples for immunoprecipitation experiments, the volume of extract samples (input) was adjusted to give a clear, non-saturated signal (5 ll for AP1c and c-SYNRG, 20 ll for AFTPH, 2 ll of a 1/20 dilution for DYNC1H1 and GFP, 20 ll of a 1/20 dilution for GFP-HR5B, 8 ll of a 1/20 dilution for DCTN1, and 4 ll of a 1/20 dilution for GAPDH).
For all immunoprecipitates, one third of the captured sample was loaded per gel lane.

siRNA transfection
The DYNC1H1 siRNA (ON-TARGET plus DYNC1H1 L-006828-00-0005) and non-targeting control siRNA (ON-TARGET plus D-001810-10-05) pools were synthesised by Dharmacon and resuspended in 1× siRNA buffer (Dharmacon).2.5 × 10 4 U2OS cells/well were seeded in 24-well plates a day before transfection.1.5 ll Lipofectamine RNAiMax reagent (Invitrogen) was added to 50 ll OptiMEM (Gibco) containing 25 nM siRNA and the mix incubated for 15-20 min at room temperature.This transfection mix was then added dropwise to the culture medium (450 ll/well), which had been replaced 30 min earlier, and mixed by gently shaking the plate.Forty-eight hours after transfection, cells were washed with PBS and fixed with 4% paraformaldehyde (Sigma)/PBS for 20 min at room temperature.After three washes with PBS, cells were processed for immunofluorescence (see below).

Transient transfection of human cells
U2OS cells were reverse transfected with pcDNA3.1-eGFP-HR5B(400 ng/well) or pcDNA3.1-GFPlinker (200 ng/well), which was pre-mixed with 50 ll OptiMEM and 1.25 ll FuGene (Promega) for 15-20 min at room temperature.The transfection mix was added on coverslips, followed by addition of 7 × 10 4 cells in 120 ll complete DMEM and adjustment of the final volume to 500 ll using additional complete DMEM.Twenty-four hours later, the transfection medium was removed and cells fixed in 4% PFA, washed in PBS and processed for immunofluorescence (see below).

Generation of HEATR5B deficient U2OS cell lines
Negative control scrambled sgRNA (variable sequence: GCACUAC-CAGAGCUAACUCA) and HEATR5B +37079270 (reverse) sgRNA (variable sequence: GGAUUAAUAAGUAGUUCACC) (CRISPRevolution; Synthego) were resuspended in nuclease-free 1× TE buffer (10 mM Tris-HCl, 1 mM EDTA pH 8.0).U2OS cells were electroporated with ribonucleoprotein complexes containing sgRNA and Cas9 2NLS protein (Synthego) using the ThermoFisher Scientific Neon TM transfection system according to the manufacturer's instructions (2.5 × 10 5 cells in 7 ll buffer R [ThermoFisher Scientific] and 7 ll sgRNA:Cas9 RNP mix [90 pmol:10 pmol]).Cells were then seeded in wells of a 6-well plate containing 4 ml pre-warmed complete DMEM.Six days later, limited dilution of cells in 96-well plates was performed to isolate single clones.Colonies of these clones were harvested by trypsin treatment and expanded for DNA extraction.The target region in the HEATR5B gene was amplified from genomic DNA according to Synthego's protocol and analysed by Sanger sequencing.Primers F-KO HEATR5B (TGG CTT TGG AGG AGC ATG AAG) and R-KO HEATR5B (ACT TCA AGG GCC CCT ATT AAA G) were used for PCR, with primer SP HEATR5B (GAG TGC CTT AAG TGT TAA GTG TTT) used for sequencing of the product.Indels were identified in sequencing chromatograms using the ICE application (Inference of CRISPR Edits; Synthego).

Immunofluorescence of human cells
Control and HEATR5B mutant cells, GFP or GFP-HEATR5B transfected cells, or GFP and GFP-HEATR5B Flp-in cells (cultured in the presence of tetracycline for 72 h) were fixed with 4% PFA for 20 min at room temperature.After three washes with PBS, cells were permeabilised with 0.1% Triton X-100 in PBS for 10 min, blocked with either 10% FBS (Gibco) or 1% BSA in PBS for 30 min and incubated with primary antibodies in blocking solution (1% FBS/PBS or 1% BSA/PBS) for 1 h at room temperature.After washing twice with PBS, secondary antibodies (Alexa-conjugated IgG H+L series, ThermoFisher Scientific; 1:1,000 dilution) were incubated with cells for 1 h.Cells were washed twice more in PBS and incubated in 1 lg/ml DAPI (Sigma) in PBS for 2 min to stain DNA, followed by two further PBS washes.Cells were washed once with autoclaved MilliQ water before mounting using ProLong Gold antifade mountant (ThermoFisher Scientific).Imaging was performed on a Zeiss 710 or 780 confocal microscope, with laser and acquisition settings kept constant within an experimental series.

Live imaging of human cells and mean square displacement analysis
Cells were seeded on 35-mm Fluorodish dishes (Fisher Scientific) in 2 ml complete DMEM.An hour before imaging, cell medium was replaced with pre-warmed Leibovitz medium without phenol red (Gibco), which was supplemented with 20 mM HEPES and 10% FBS.For imaging of AP1r1-RFP or DsRed-RAB11A in GFP-HR5B cells, as well as AP1r1-RFP in control and HR5B KO cells, 1 × 10 5 cells were seeded the day before transfection and cell culture medium replaced with 1.5 ml fresh medium (without tetracycline) 1 h before transfection.Cells were transfected with a transfection mix comprising 500 ng pAP1r1-RFP or 400 ng pDsRed-RAB11A WT in 250 ll OptiMEM and 6.25 ll PEI that had been pre-incubated at room temperature for 20 min before transfection.The transfection medium was replaced 6 h post transfection with fresh pre-warmed medium (containing tetracycline).Transfected cells showing low-tomedium expression of AP1r1-RFP or DsRed-RAB11A were filmed 24 h post transfection.
Movies of GFP-HR5B cells expressing DsRed-RAB11A were acquired using the 63 × 1.4 NA Plan Apo oil objective of a Perki-nElmer Ultraview ERS confocal spinning disk system built around an Olympus IX71 microscope equipped with an Orca ER camera (Hamamatsu).Data were acquired using sequential imaging of the two channels (one pair of images captured every 1.3 s).Movies of GFP-HR5B cells expressing AP1r1-RFP were acquired on a custom spinning disk confocal microscopy system composed of a Nikon Ti stand equipped with perfect focus, a fast-piezo z-stage (ASI) and a 100× NA 1.49 TIRF objective.Confocal illumination was achieved with a CSU-X1 spinning disk head (Yokogawa) and a Photometrics 95B back-illuminated sCMOS camera operating in global shutter mode and synchronised with the rotation of the spinning disk.Excitation was performed with 488-nm (150 mW OBIS LS) and 561-nm (100 mW OBIS LS) lasers fibered within a Cairn laser launch.To enable fast acquisition, hardware was synchronised by a Zynq-7020 Field Programmable Gate Array (FPGA) stand-alone card (National Instrument sbrio 9637) running custom code.Sample temperature was maintained at 37°C using a heating enclosure (MicroscopeHeaters.com).The camera was configured in 12-bit dynamic range mode (gain 1) to maximise sensitivity, and a 600 × 600 pixel region of interest selected to maximise acquisition speed.Sequential imaging of a single z-plane was performed with a total exposure time for both frames of 0.206 s.Absolute timestamps were recorded to ensure accurate tracking.Acquisition was controlled by Metamorph software (7.10.1.161).
High-speed imaging of AP1r1-RFP motility in human cells was performed using the Nikon Ti-based custom spinning disk confocal microscopy system described above, with the exception that the camera was operated in streaming mode with an effective frame-rate of 17.5 Hz (50 ms exposure plus ~7 ms read-out time).Particle tracking and analysis of these time series was performed in Fiji (Schindelin et al, 2012) and Matlab 2021b (Mathworks).AP1r1-RFP particles were automatically detected in a threshold-free manner by 2D gaussian fitting using the TwoTone TIRF-FRET matlab package (Holden et al, 2010).Trajectories were then automatically tracked using a MATLAB implementation by D. Blair and E. Dufresne of the IDL particle tracking code initially developed by D. Grier, J. Crocker and E. Weeks (http://site.physics.georgetown.edu/matlab/index.html).Since short tracks make MSD analysis inaccurate (Zahid et al, 2018), tracks that lasted for fewer than 10 time points were discarded.We also manually drew Regions of Interest (ROI) around cells and excluded all tracks corresponding to tracked objects that were not located in cells.For each track, the MATLAB class MSD Analyzer (Tarantino et al, 2014) was used to compute the Mean Square Displacement (MSD) of segments of increasing duration (delay time t).The weighted mean MSD (Tarantino et al, 2014) across all tracks was then computed per delay time and plotted as a function of the delay time considered.AP1r1-RFP particle intensity upon HR5B disruption or as a function of track length was computed by integrating the area under the gaussian from the gaussian fitting data, followed by averaging of the values per track.
For co-localisation analysis of GFP-HR5B and AP1r-RFP in live cells, the fluorescent signals were imaged sequentially on a single zplane at high-speed (4.8 Hz).Particles within cells were detected by 2D gaussian fitting and tracked as above.We then evaluated the colocalisation state of each timepoint of each GFP-HR5B track using an object-based approach (Ben-Sasson et al, 2021).Briefly, a GFP-HR5B spot was considered co-localised if an AP1r-RFP spot belonging to a track was found at a distance of < 300 nm, which is approximately the resolution of the microscope.For each timepoint, the percentage of co-localisation was computed as the ratio between the number of co-localising GFP-HR5B tracks over the total number of tracks multiplied by 100.This value was then averaged over the first 50 timepoints of each movie to limit the contribution of transient co-localisation events.We verified that this method yielded 100% co-localisation in controls with diffraction-limited beads that were fluorescent in both the GFP and RFP channels.
Generation of Drosophila Heatr5 mutant, GFP-Heatr5B and GFP-Golgin-245 strains Flies expressing a pair of gRNAs that target the 5 0 region of the Heatr5 gene (gRNAs 1+2; Appendix Fig S6 ) from the U6:3 promoter were generated using the pCFD4 plasmid, as described (Port et al, 2014) (see Appendix Table S4 for sequences of oligos used for gRNA cloning).Males expressing this transgene were crossed with nos-Cas9 ZH-2A females (which express Cas9 specifically in the germline), with mutations identified in the offspring of the progeny by Sanger sequencing of PCR products derived from the targeted genomic region (Port & Bullock, 2016).The GFP-Heatr5 expression construct was generated by restriction enzyme-mediated cloning of PCR-amplified eGFP and Heatr5 coding sequences into a pCASPER-based plasmid that expresses proteins under the control of the ubiquitously active a-tubulin84B promoter (Dienstbier et al, 2009).The Heatr5 sequence was derived from the full-length cDNA clone GH08786 (Drosophila Genome Resource Center).Flies were transformed with this plasmid by P-element-mediated integration using standard procedures.The GFP-Golgin-245 knock-in strain was generated by CRISPR/Cas9mediated homology-directed repair (HDR), as described (Port et al, 2014;Port & Bullock, 2016).Briefly, embryos of nos-Cas9 ZH-2A mothers were injected with a mixture of three plasmids: two pCFD3-gRNA plasmids targeting the Golgin245 genomic sequences shown in Appendix Fig S9 (see Appendix Table S4 for oligo sequences used for cloning) and a pBlueScript-based donor plasmid (pBS-GFPG245) that has eGFP flanked by ~1-kb Golgin245 homology arms.The final concentration of each plasmid in the injection mix was 100 ng/ll for each of pCDF3-gRNA plasmids and 150 ng/ll for pBS-GFPG245.Successful HDR was confirmed by PCR-based analysis of the progeny of the offspring of surviving embryos, as described (Port et al, 2014(Port et al, , 2015;;Port & Bullock, 2016).

CRISPR-based disruption of Heatr5 in the Drosophila female germline
Mothers doubly heterozygous for nos-Cas9 ZH-2A and one of two pCDF4 transgenes that express independent pairs of gRNAs targeting Heatr5 (gRNAs 1+2 or gRNAs 3+4; Appendix Figs S6A and S7A) were crossed with wild-type males and introduced into egglaying cages mounted on plates of apple juice agar (1.66% [w/v] sucrose, 33.33% [v/v] apple juice, 3.33% [w/v] agar and 10.8 mM methyl-4-hydroxybenzoate). Embryos from this cross were collected in timed egg lays and processed for phenotypic analysis, as described below.

Analysis of immunofluorescence signals in human cells and fly embryos
Quantification of spread of fluorescent signals away from the nucleus in U2OS cells was performed using a custom ImageJ script (available at https://github.com/jboulanger/imagej-macro/tree/main/Cell_Organization).The nuclear DAPI signal was segmented either using StartDist (Schmidt et al, 2018) or a median filter, followed by a rolling ball, a threshold controlled by a probability of false alarm, a watershed and the extraction of connected components.The signed euclidean distance transform was then computed for each region of interest, which allowed association of each pixel with the closest nucleus.Background pixels were discarded by segmenting the maximum projection intensity of all channels using a smoothing step and a threshold based on a quantile of the intensity distribution.Regions touching the border of the image were discarded to avoid analysis of incomplete cells.The signal of interest was segmented using a sharpening, a median filter, a rolling ball and finally a threshold controlled by a user defined false alarm rate.For each cell, the spread was computed as the sum of the squared deviation to the centroid weighted by the signal intensity in each segmented mask.The number and length of tubules in human cells was determined manually in ImageJ using the freehand selection tool.To quantify co-localisation of fluorescent puncta in HeLa cells, a custom ImageJ macro was produced (available at https://github.com/jboulanger/imagej-macro/blob/main/Colocalization_Analysis/ Colocalization_By_Cell.ijm).Briefly, cells were segmented using the same strategy as used for quantification of the spread of fluorescent signals.The puncta were then segmented in each channel using a Laplacian of Gaussian filter and a threshold.For each cell, the overlapping puncta were counted and reported as a percentage of the total number of puncta in the first channel.ImageJ was also used for quantification of particle number and total particle intensity in human cells and fly embryos.The non-adjusted channel of interest was thresholded and segmented, followed by removal of particles smaller than five pixels.In mammalian cells, particle intensity and number of particles were measured per individual cell.In fly embryos, rectangular regions of 300 lm 2 were analysed in the apical cytoplasm, upper basal cytoplasm, lower basal cytoplasm and yolk; the upper basal and lower basal cytoplasmic regions were defined by the midpoint of the distance between the edge of the yolk and the basal side of the nuclei.

Analysis of AP1 and mRNA motility in Drosophila embryos
Motility of AP1-positive structures was assessed with an affinity purified a-Drosophila AP1c rabbit antibody that is highly specific (Hirst et al, 2009).Fluorescent AP1c antibody conjugates were generated by incubating 1 ll of the a-AP1c antibody with 0.5 ll of Alexa555-conjugated donkey a-rabbit IgG (H+L) highly crossadsorbed secondary antibody (ThermoFisher Scientific) and 3.5 ll PBS at room temperature for 30 min.The antibody solution was then dialysed by dropping on a 0.025 lm-pore filter MCE membrane (13 mm-diameter [Millipore]) that was floating on 25 ml of PBS, and incubating for 1 h.The drop was recovered and centrifuged briefly to remove any aggregates before loading into a laser-pulled borosilicate Microcap needle (Drummond).Primary antibodies conjugated to the secondary antibody as negative controls were: rabbit a-HA (Sigma H6908) and rabbit a-dinitrophenol (Invitrogen A6430).Alexa488-UTP-labelled bcd mRNA was generated by in vitro transcription as described (Bullock et al, 2006) and loaded into the injection needle at a concentration of 750 ng/ll in dH 2 O.
Antibody and mRNA injections into embryos were performed at room temperature as described (Bullock et al, 2006) using a micromanipulator fitted to an Ultraview ERS spinning disk imaging system (PerkinElmer).Time-lapse images were acquired at 1 frame/s (AP1c antibody conjugates) or 2 frame/s (bcd mRNA) using a 60×/ 1.2 NA UPlanApo water objective and an OrcaER camera (Hamamatsu).Centroid-based automatic tracking of fluorescent antibody and mRNA particles in the cytoplasm and quantification of their movements was performed using a custom script written in Mathematica (Wolfram) by A. Nicol and D. Zicha (Bullock et al, 2006).To assess the contribution of microtubules to motility of AP1-positive puncta, wild-type embryos were injected with a 20 ng/ll solution of colcemid 2 min prior to injection of the fluorescent AP1c antibody conjugate.After imaging the antibody signal for ~10 min, colcemid was inactivated by a 10 s exposure to UV light through the mercury lamp attached to the microscope, with filming resumed 60 s afterwards.To determine the role of dynein in transport of AP1 positive structures, embryos were preinjected 2 min before AP1c antibody conjugate injection with a 1 lg/ll solution of mouse a-Dic antibody (clone 74.1; Millipore) or a 1 lg/ll solution of mouse a-GFP antibody (mixture of clones 7.1 and 13.1; Sigma) as a control.These antibodies were dialysed before use, as described above.Multiple injection sessions were performed for each experiment to confirm the consistency of results.When assessing the effects of mutating Heatr5, the control and mutant embryo injections were interleaved within each imaging session.
To visualise both Golgin-245 and AP1, blastoderm embryos from GFP-Golgin-245 homozygous mothers were injected with Alexa555labelled AP1c antibody conjugates as described above.To maximise the intensity of the relatively dim GFP-Golgin-245 signal, the focal plane was set closer to the surface of the embryo than for AP1c or mRNA tracking.This meant that it was typically not possible to follow transported AP1c puncta all the way from the yolk to the upper basal cytoplasm.In these experiments, images were subjected to 2 × 2 binning, with sequential imaging of the two channels (exposure times of 500 ms for the AP1c signal and 1 s for the GFP-Golgin-245 signal).

Immunoblotting of Drosophila embryo extracts
Drosophila embryo extracts were generated for immunoblotting as described (McClintock et al, 2018), with a Coomassie (Bradford) Protein Assay (ThermoFisher Scientific) used to ensure that the amount of total protein loaded per gel lane was equivalent between genotypes.Electrophoresis and immunoblotting were performed as described above using a-Drosophila AP1c rabbit antibodies (see above; 1:5,000 dilution) and a-b-actin rabbit antibodies (Abcam 8224; 1:10,000 dilution).

Statistical analysis, data plotting and experimental design
Statistical evaluations and plots were made with Prism (version 9; GraphPad) or Perseus.Appropriate statistical tests were selected based on confirmed or assumed data distributions (Gaussian or non-Gaussian), variance (equal or unequal), sample size and number of comparisons (pairwise or multiple).Details of sample sizes and types of tests are included in the figure legends.Individual data points are shown in plots, except when N > 40 (when box and whisker plots are used).The investigators analysing the data were not blind to the identity of the samples. Figure1.
1+2 ) (Appendix Fig S6A).Zygotic Heatr5 homozygous mutants (Hr5 1 /Hr5 1 ) failed to reach adulthood (Fig 5A), with most animals dying during the 2 nd larval instar stage (Appendix Fig S6B).The lethal phenotype was not complemented by a pre-existing deletion of a genomic region that includes the Heatr5 gene (Appendix Fig S6B) but was fully rescued by a wild-type Heatr5 transgene (Fig 5A).Thus, the lethality observed was due to the Heatr5 mutation and not an off-target effect of the gRNAs.
Fig 6A; Appendix Fig S8B; Movie EV6).Punctate signals were not observed with fluorescent secondary antibodies injected alone or when bound to control primary antibodies (Appendix Fig S8C), confirming their dependence on the AP1c antibody.

◀
Figure 4. HEATR5B promotes AP1 membrane localisation and motility.A Representative confocal images of AP1c and RAB11A in immunostained wild-type (control) and HEATR5B mutant (HR5B KO) U2OS cells.Dashed box shows region magnified in right-hand images.Blue arrowheads show diffuse AP1c signal in the cytoplasm of mutant cells.Yellow arrowheads in insets show examples of AP1c association with RAB11A.White circles indicate merge of magnified images.B, C Quantification of number (B) and mean total intensity (C) of AP1c puncta in control (Ctrl) and HR5B KO U2OS cells (a.u., arbitrary units).D Left, immunoblot images showing levels of HR5B and AP1c in control and HR5B KO U2OS cells (b-actin, loading control).Right, quantification of AP1c signal (normalised to b-actin signal).E Quantification of spread of total AP1c signal away from the perinuclear region in control and HR5B KO U2OS cells.Both punctate and diffuse signals were quantified.F Quantification of weighted mean MSD of AP1r1-RFP puncta in control and HR5B KO U2OS cells.G, H Representative confocal images showing localisation of RAB11A (G and H), AP1c (G) and DCTN1 (H) in cells that strongly express GFP-HR5B or a GFP control.Arrowheads show perinuclear clustering of signals in GFP-HR5B cells.GFP signals were not amplified with antibodies.I Quantification of spread of RAB11A signal away from perinuclear region in GFP or GFP-HR5B overexpressing U2OS cells.Data information: Scale bars: (A) 10 lm; (A) insets 2.5 lm; (G and H) 5 lm.In (B, C, and E), boxes show interquartile range (25 th -75 th percentile of values) and horizontal line is the median.In (I), circles indicate values from individual cells; columns and error bars represent mean AE SD.Number of cells (in B, C, E and I) or independent experiments (D) analysed is shown above columns.In (F), n = number of particles (from 31 control and 17 KO U2OS cells).Statistical significance was evaluated with an unpaired two-tailed t-test: ****P < 0.0001; ***P < 0.001; **P < 0.01.Source data are available online for this figure.Ó 2023 The Authors The EMBO Journal 42: e114473 | 2023 fluorescent bicoid (bcd) RNA (Bullock & Ish-Horowicz, 2001; Wilkie & Davis, 2001; Snee et al, 2005; Bullock et al, 2006).Neither apical nor basal mRNA transport was significantly impaired by disruption of Heatr5 (Figs 6D and EV4C; Movie EV9).Thus, Heatr5 selectively promotes dynein-mediated transport of AP1-positive structures in the embryo.Heatr5-dependent AP1 trafficking routes in the embryo involve endosomal and Golgi membranes To next sought to shed light on the trafficking routes of the transported AP1-associated structures in the embryo.To this end, we used CRISPR-mediated homology-directed repair to generate a fly strain in which the trans-Golgi marker Golgin-245 is endogenously tagged with GFP (Appendix Fig S9) and confirmed that the fusion protein is correctly localised to the dispersed "mini-stacks" that constitute the Golgi apparatus in Drosophila cells (Kondylis & Rabouille, 2009; Appendix Fig S10A).Injecting the fluorescent AP1c antibody conjugate into the GFP-Golgin-245 embryos revealed that AP1 puncta were often transported to, and engaged with, the periphery of Golgin-245-positive structures or were trafficked together with them (Fig 7A; Appendix Fig S10B; Movies EV10-EV12).Consistent with these observations, AP1c puncta were frequently located adjacent to Golgin-245 puncta in fixed, uninjected embryos (Appendix Fig S10C).These findings suggest that microtubule-based transport of AP1-associated membranes facilitates their interaction with Golgi membranes.Staining of fixed YFP-Rab11 knock-in embryos (Dunst et al, 2015) demonstrated that many of the AP1c-positive structures in the basal cytoplasm associated with Rab11 (Appendix Fig S10D).However, AP1c and Rab11 signals rarely overlapped precisely.This finding suggests that, as in U2OS cells (Fig 4A), these proteins are present on closely opposed or conjoined endosomal membrane structures.In contrast, AP1c was not enriched in the vicinity of the pool of Rab11 that is located at the apically positioned microtubuleorganising centre(Pelissier et al, 2003; Appendix Fig S10D).These observations implicate the transported AP1 structures in trafficking events in the basal cytoplasm involving membranes of the recycling endosome compartment and the Golgi apparatus.

Figure 5 .
Figure 5. Drosophila Heatr5 is required for viability and promotes membrane association of AP1.A Quantification of survival to adulthood of zygotic Heatr5 (Hr5) homozygous mutants in the absence and presence of a wild-type Hr5 transgene (Tg).B Quantification of hatching of eggs laid by control (nos-cas9) and nos-cas9 gRNA-Hr5 1+2 females.C Representative images of cuticle preparations of late-stage embryos (top panels) and AP1c distribution in blastoderm-stage embryos (bottom panels) laid by control and nos-cas9 gRNA-Hr5 1+2 females.Arrowheads point to denticle belts in the control, and "ap", "ba" and "yo" refer to apical cytoplasm, basal cytoplasm and yolk, respectively.Scale bar in bottom left panel represents 30 lm in top left panel, 25 lm in top right panel and 10 lm in bottom panels.D Quantification of number and mean total intensity of AP1c puncta in blastoderm embryos laid by control and nos-cas9 gRNA-Hr5 1+2 mothers.Data information: In (A, B and D), circles indicate values from individual crosses (A, B) or embryos (D); columns and error bars represent mean AE SD; number of independent crosses or embryos analysed is shown above columns (in A and B, at least 80 flies or 200 embryos were analysed per cross); statistical significance was evaluated with an unpaired two-tailed t-test: ****P < 0.0001.Source data are available online for this figure.

Figure 7 .
Figure 7. Drosophila Heatr5 promotes transport of AP1-positive structures to the Golgi and is required for Golgi organisation.A Stills from representative image series of GFP-Golgin-245 knock-in embryos injected with fluorescent AP1c antibody conjugates.Yellow arrowhead shows an AP1cpositive structure that is transported apically, interacts with a Golgi body and is then transported basally.Blue arrowhead shows AP1c at the front of an apically transported Golgi body.B Representative confocal images of GFP-Golgin-245, Golgin-84 and GM130 distribution in embryos from control (nos-cas9) and nos-cas9 gRNA-Hr5 1+2 mothers.Yellow and blue arrowheads show, respectively, examples in mutant embryo of expanded Golgi structures beneath the nuclei and ectopic accumulation of GFP-Golgin-245 in the yolk.Data information: Scale bars: (A) 2 lm; (B) 10 lm.Source data are available online for this figure.